Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 14 de 14
Filter
1.
Front Dent ; 20: 22, 2023.
Article in English | MEDLINE | ID: mdl-37701658

ABSTRACT

Objectives: Registries are powerful tools for the collection and distribution of valid and reliable data. The initial step in health information management is to design a minimum data set that can improve the collection of high-quality data from the registry. The present pilot study aimed to determine the optimal minimum data set for dental implants to effectively utilize at Tehran University of Medical Sciences, Tehran, Iran. Materials and Methods: This descriptive cross-sectional study was conducted in 2019 at Tehran University of Medical Sciences. A minimum data set checklist was developed based on our previous systematic review. The content validity of the minimum data set was approved by the recruited experts and the final minimum data set was established using the Delphi technique. Results: The minimum data set for dental implants consists of two separate sections - administrative and clinical data. The administrative portion includes two main segments: patient demographic data and clinic data, consisting of 12 data elements. The clinical part includes five main segments (patient clinical data, implant data, implant complications, implant loss, and implant follow-up), and contains 96 data elements. Conclusion: This study suggests a minimum set of data for dental implants that can aid in efficient management of information, facilitate evidence-based decision-making, and enable high-quality clinical research, evaluation of treatment results, monitoring, and benchmarking of care.

2.
Front Dent ; 17(5): 1-8, 2020 Mar.
Article in English | MEDLINE | ID: mdl-33615303

ABSTRACT

OBJECTIVES: This study aimed to evaluate the mucograft collagen matrix (CM) to increase keratinized tissue around teeth compared to free gingival graft (FGG). MATERIALS AND METHODS: The present double-blind, randomized, controlled clinical trial studied 12 patients who had 2 mm or less keratinized gingiva bilaterally around mandibular premolars. The 6-month width of keratinized tissue, periodontal parameters (preoperatively and 1, 3, and 6 months postoperatively), color match, pain, and total surgical time were measured. RESULTS: The mean dimensional change of keratinized gingiva 6 months postoperatively was 4.1±0.7 mm for FGG and 8±1.7 mm for CM. Periodontal parameters were not affected in the two groups. The CM group had a significantly lower pain, experienced less surgery time, and gained better aesthetics compared to the FGG group. CONCLUSION: CM appears to be a suitable substitute for FGG in procedures designed to increase keratinized tissue around teeth. It has remarkable benefits, such as acceptable keratinized tissue gain, less pain, less surgical chair time, and better aesthetics.

3.
J Dent (Tehran) ; 15(4): 259-265, 2018 Jul.
Article in English | MEDLINE | ID: mdl-30405735

ABSTRACT

Typically, full arch reconstruction of edentulous ridges requires five to 10 dental implants; however, some patients demanding fixed implant-supported prostheses are not able to medically or economically afford complex bone grafts and/or a greater number of implants. These situations could pivot the treatment plan toward the All-on-4 protocol. Nevertheless, due to less implant support in this treatment option, mechanical and biological complications might arise. This article describes the treatment of a fully edentulous patient with two types of fixed implant-supported prostheses on four dental implants along with the following complications.

4.
J Dent (Tehran) ; 15(2): 130-136, 2018 Mar.
Article in English | MEDLINE | ID: mdl-29971131

ABSTRACT

OBJECTIVES: This study aimed to analyze functional stresses around short and long implant-supported prostheses with different crown heights. MATERIALS AND METHODS: Four three-dimensional (3D) models were designed with SolidWorks 2015. In models 1 (control) and 2, three dental implants (second premolar 4.1×8 mm, molars: 4.8×8 mm) were placed. In models 3 and 4, three dental implants (second premolar 4.1×4 mm, molars: 4.8×4) were placed. Residual bone height was 10 mm in groups 1 and 2 (grafted bone) models and 6 mm in groups 3 and 4. The crown heights were modeled at 11.5 mm for groups 1 to 3, and 15 mm for group 4. The applied oblique force was 220 N to simulate chewing movements. The maximum von Mises and principal stresses on the implants and the supporting tissues were compared using the 3D finite element method. RESULTS: In all models, the highest stress value was seen within the most coronal part of bone (crestal bone), which was cortical or grafted bone. The highest stress values in the bone supporting the implant neck were seen in the premolar region of each model, especially in model 4 (291.16 MPa). The lowest stress values were demonstrated in the molar region of model 3 (48.066 MPa). The model 2 implants showed the highest von Mises stress concentrated at their neck (424.44 MPa). CONCLUSIONS: In atrophic posterior mandible with increased crown height space, short implants with wider diameter seem to be a more feasible approach compared to grafting methods.

5.
Biomed Res Int ; 2018: 2860367, 2018.
Article in English | MEDLINE | ID: mdl-29682529

ABSTRACT

BACKGROUND: This study aims to analyze the effect of Semelil, an herbal selenium-based medicine, on osteogenesis in rabbit calvarium defects. METHODS: Four identical bony defects (8 mm) were created in the calvarium of 16 New Zealand male rabbits and filled randomly with xenogenic bone substitute material (Bio-Oss®) and semelil herbal drug (ANGIPARS™). One site was filled with Bio-Oss (B); the second site was treated with ANGIPARS (A); the third site was treated with ANGIPARS + Bio-Oss (AB); and the fourth site was left as untreated control (C) and defects were left unfilled. Rabbits were randomly divided into two groups (n = 8) and sacrificed at four and eight weeks. Percentage of new bone formation, type of the newly formed bone, percentage of the remaining xenograft biomaterial, and foreign body reaction (FBR) were evaluated via histological and histomorphometric analyses. RESULTS: The percentage of new bone formation was significantly different among four groups. The highest effect was observed in AB, followed by A, B, and C groups, respectively. The difference in the mean percentage of new bone formation between four and eight weeks was significant for all four groups (P < 0.001). Regarding bone formation, the interaction effect of A and B was significant at four (P < 0.001) and eight weeks (P = 0.002). ANGIPARS alone and in presence of Bio-Oss enhanced new bone formation at both four and eight weeks (P < 0.001). The mean amount of new bone formation was significantly different at four and eight weeks in groups C (P = 0.008), A (P < 0.001), B (P < 0.001), and AB (P = 0.003). FBR was not observed in any group. CONCLUSION: Semelil may be useful as an adjunct to conventional osteoconductive materials in order to enhance osteogenesis.


Subject(s)
Bone Substitutes/pharmacology , Osteogenesis/drug effects , Plant Extracts/pharmacology , Selenium/pharmacology , Skull/drug effects , Animals , Biocompatible Materials/pharmacology , Bone Regeneration/drug effects , Bone Transplantation/methods , Male , Minerals/pharmacology , Phytotherapy/methods , Plants, Medicinal/chemistry , Rabbits
6.
Clin Oral Implants Res ; 28(3): 314-319, 2017 Mar.
Article in English | MEDLINE | ID: mdl-26919480

ABSTRACT

OBJECTIVES: This retrospective cross-sectional study aimed to evaluate the prevalence of biologic complications of implants in patients treated by fixed implant supported prosthesis without regular maintenance program. MATERIALS AND METHODS: One hundred thirty-four patients with 478 implants, installed during a 10-year period (2001-2010), were recruited for clinical and radiographic follow-up examinations. The periodontal and implant health status were assessed to determine the prevalence of peri-implant diseases. RESULTS: The mean ± SD loading time for implants was 4.43 ± 2.25 years. Fifty-five percentage of the implants were tissue-level implants. Peri-implantitis was diagnosed in 20% of patients and 8.8% of implants. Subject-based and implant-based prevalence of mucositis amounted to 48.5% and 40%, respectively. Mean crestal bone loss in tissue-level and bone-level implants were 0.28 ± 0.53 mm and 1.37 ± 1.5 mm, respectively. Smoking and lack of keratinized mucosa was associated with peri-implantitis at an odds ratio of OR = 2.57 and 3.89, respectively. CONCLUSIONS: After a 5-year period of loading without any regular maintenance program, one out of five patients would experience peri-implantitis. Tissue-level implants had lower values of peri-implantitis prevalence and crestal bone loss.


Subject(s)
Dental Prosthesis, Implant-Supported/adverse effects , Peri-Implantitis/epidemiology , Cross-Sectional Studies , Dental Prosthesis Design , Humans , Prevalence , Retrospective Studies , Risk Factors
7.
ARYA Atheroscler ; 12(1): 1-9, 2016 Jan.
Article in English | MEDLINE | ID: mdl-27114731

ABSTRACT

BACKGROUND: The aim of this study was to investigate knowledge, attitude and practice (KAP) of cardiovascular disease (CVD) patients about their oral health status. METHODS: In this cross-sectional study, we analyzed the data of 150 CVD patients that collected by a self-administered questionnaire consists of demographic characteristics and KAP. Oral health indicators calculated based on the results of oral examination by an expert dentist. RESULTS: CVD patients had an overall moderate level of knowledge and attitude, but their practice was lower than moderate. There were important associations between knowledge scores with gender, education, residential area and financial status, between attitude scores with education and residential area, and between practice scores with education and financial status. There were no associations between KAP and age, marital status or job. Significant positive correlations were found between KAP components. Significant negative correlations were found between oral hygiene index with knowledge and practice. CONCLUSION: The practice of heart disease patients about their oral health was poor, and declares that increasing awareness and attitude may not promote practice. Efficient programs are needed to promote oral health practice of adult populations in special groups.

8.
J Dent (Tehran) ; 13(6): 415-422, 2016 Nov.
Article in English | MEDLINE | ID: mdl-28243303

ABSTRACT

OBJECTIVES: The purpose of this study was to compare the outcomes of immediate and delayed rehabilitation of edentulous jaws by means of two straight and two tilted implants after one year of function. MATERIALS AND METHODS: Thirty consecutive patients (16 males, 14 females) were enrolled in this study. Two anterior straight and two posterior tilted implants were placed in each patient. According to the implant insertion torque and the need for bone grafting, implants were loaded immediately (at 72 hours) or delayed (after four months) using a fixed metal resin prosthesis. RESULTS: One axial implant failed in the delayed group after one year of loading, resulting in cumulative implant survival rate of 99.3%. The mean marginal bone loss was 0.84mm. No significant difference was found between axial and tilted implants in the two groups (P>0.05). CONCLUSIONS: Based on the results, immediate or delayed fabrication of final prosthesis on two tilted and two axial implants did not result in significant differences in survival rates or marginal bone loss.

9.
J Int Acad Periodontol ; 17(1): 2-13, 2015 Jan.
Article in English | MEDLINE | ID: mdl-26233968

ABSTRACT

PURPOSE: To analyze and compare the stress distribution around tapered and cylindrical implants and investigate how different abutment diameters influence crestal bone stress levels. MATERIALS AND METHODS: Six finite element models of an abutment (5 mm, 4.3 mm, and 3.5 mm in diameter) and supporting implants (tapered and cylindrical) were designed. A vertical force of 100 N and a 15-degree oblique force of 100 N were applied separately on the occlusal surface, and von Misses stresses were evaluated in the cortical and cancellous bone. RESULTS: Higher stress was observed under oblique loading than under vertical loading of both tapered and cylindrical implants. Tapered implants demonstrated more stress under both vertical and oblique loading. Platform switching reduced peri-implant crestal bone stress in all models under vertical and oblique forces. The peri-implant crestal bone around tapered implants experienced 4.8% more stress under vertical loading and 35% more stress under oblique loading in comparison to bone around cylindrical implants (2.62 MPa with vertical loading, 8.11 MPa under oblique loading). Oblique loads resulted in much higher stress concentrations in the peri-implant crestal bone than vertical loads (238% in cylindrical and 308% in tapered implants). When the abutment diameter decreased, both models showed reductions of stress in the crestal bone under both types of loading. CONCLUSION: In this finite element analysis, tapered implants increased crestal bone stress upon loading, and platform switching minimized the stress transmitted to the crestal bone in both tapered and parallel wall implants.


Subject(s)
Alveolar Process/physiology , Dental Implant-Abutment Design , Dental Implants , Finite Element Analysis , Biomechanical Phenomena , Bite Force , Computer Simulation , Dental Abutments , Dental Prosthesis Design , Elastic Modulus , Humans , Imaging, Three-Dimensional/methods , Models, Biological , Stress, Mechanical , Surface Properties
10.
J Dent (Tehran) ; 12(1): 31-8, 2015 Jan.
Article in English | MEDLINE | ID: mdl-26005452

ABSTRACT

OBJECTIVES: Considering the importance of bone augmentation prior to implant placement in order to obtain adequate bone quality and quantity, many studies have been conducted to evaluate different techniques and materials regarding new bone formation. In this study, we investigated the bone healing capacity of two different materials deproteinized bovine bone mineral (DBBM with the trade name of Bio-Oss) and demineralized freeze-dried bone allograft (DFDBA with the trade name of DynaGraft). MATERIALS AND METHODS: This randomized blinded prospective study was conducted on twelve New Zealand white rabbits. Three cranial defects with an equal diameter were created on their calvarium. Subsequently, they were distributed into three groups: 1. The control group without any treatment; 2. The Bio-Oss group; 3. The DynaGraft group. After 30 days, the animals were sacrificed for histologic and histomorphometric analysis. RESULTS: Substantial new bone formation was observed in both groups. DynaGraft: 56/1 % ± 15/1 and Bio-Oss: 53/55 % ± 13/5 compared to the control group: 28/6 % ± 11/2. All groups showed slight inflammation and a small amount of residual biomaterial was observed. CONCLUSION: Considerable new bone formation was demonstrated in both DynaGraft and Bio-Oss groups in comparison with the control group. Both materials are considered biocompatible regarding the negligible foreign body reaction.

11.
J Oral Implantol ; 41(3): 284-91, 2015 Jun.
Article in English | MEDLINE | ID: mdl-24383495

ABSTRACT

The aim of the present study was to investigate an isolation procedure to culture mesenchymal stem cells derived from bone marrow and evaluate their potential in periodontal regeneration. Potential stem cells from bone marrow, aspirated from the iliac crest of nine mongrel canines 1 to 2 years of age, were cultivated. After the examination of surface epitopes of the isolated cells, the total RNA from osteogenic, adipogenic, and chondrogenic cell cultures were analyzed by reverse transcription polymerase chain reaction (RT-PCR) to confirm stem cell gene expressions. 2 × 10(7) mL of the stem cells were loaded on 0.2 mL of anorganic bovine bone mineral (ABBM) granules. In each animal, bilateral acute/chronic intrabony periodontal defects were created surgically and by placement of ligatures around the cervical aspect of the teeth. At week 5, after flap debridement, the bilateral defects were randomly assigned to 2 treatment groups: the control group received ABBM, and the test group received BMSCs-loaded ABBM. Eight weeks after transplantation, regenerative parameters were analyzed histologically and histometrically. The RNA expressions confirmed the cultivation of mesenchymal stem cell. More new cementum and periodontal ligament (PDL) were measured in the test group (cementum: 3.33 ± 0.94 vs 2.03 ± 1.30, P = 0.027; PDL: 2.69 ± 0.73 vs 1.53 ± 1.21, P = 0.026). New bone formation was similar in both groups (2.70 ± 0.86 vs 1.99 ± 1.31; P = 0.193). Mesenchymal stem cells derived from bone marrow should be considered a promising technique for use in patients with periodontal attachment loss and merits further investigations.


Subject(s)
Alveolar Bone Loss , Mesenchymal Stem Cells , Animals , Bone Marrow , Bone Regeneration , Cattle , Dental Cementum , Guided Tissue Regeneration, Periodontal , Periodontal Ligament , Random Allocation , Regeneration
12.
Implant Dent ; 23(6): 697-703, 2014 Dec.
Article in English | MEDLINE | ID: mdl-25347271

ABSTRACT

PURPOSE: To evaluate the bone density using the surgeon's tactile sense and compare it to the Lekholm and Zarb classification and computed tomography (CT) scan to see if correlations exist. MATERIALS AND METHODS: Fifty-two implants were inserted in 22 patients. The bone densities of recipient site were preoperatively determined by density value as Hounsfield Units (HU) using CT scans. According to the Lekholm and Zarb classification, the bone quality scored 1 to 4 on cross-sectional CT. The clinical hardness of recipient sites were assessed on drilling by the surgeon's tactile sense and recorded as D1-D4 based on Misch criteria. Linear regression analysis was used to evaluate the relationship between density values of implant sites. RESULTS: The mean bone density was 536.94 ± 220.39 HU. There were 7.7% implants in bone type D1, 46.2% in D2, 32.7% in D3, and 13.5% in D4. Bone classification according to Lekholm and Zarb was significantly correlated to the surgeon's tactile sense (Spearman's rho = 0.36; P = 0.01) and with HU on CT images (Spearman's rho = -0.61; P < 0.001). The surgeon's tactile sense had a significant correlation with bone density in preoperative CT scans (Spearman's rho = -0.67; P < 0.001). A significant correlation was found between the bone density in HU with age (Spearman's rho = 0.34; P = 0.01). CONCLUSION: A high-quality cross-sectional CT may suffice as a site-specific preoperative diagnostic predictor that can confirm and complement the tactile sense of the surgeon to help differentiate good, moderate, and poor bone density.


Subject(s)
Bone Density , Dental Implantation, Endosseous , Dental Implants , Tomography, X-Ray Computed , Touch Perception , Adult , Aged , Aged, 80 and over , Female , Humans , Male , Middle Aged
13.
Dent Res J (Isfahan) ; 11(1): 87-91, 2014 Jan.
Article in English | MEDLINE | ID: mdl-24688566

ABSTRACT

BACKGROUND: The aim of this in vitro study was to evaluate the effect of shape, diameter and length of implants on their primary stability based on resonance frequency analysis. MATERIALS AND METHODS: Replace select tapered and Branemark MK III implants were selected. Each of these two selected groups was divided into nine subgroups based on the implant length (IL) (short, medium and long) and the implant diameter (ID) (narrow platform [NP], regular platform [RP] and wide platform [WP]). Five implants were assigned to each of the nine subgroups. Implants were placed in artificial bone blocks with bone quality similar to D3 bone. Immediately after the implant placement, its primary stability was measured using Osstell Mentor equipment. T-test and Tukey's honest significant difference Post hoc were performed for data analysis. Statistical significance was defined at P < 0.05. RESULTS: Replace select system showed significantly higher primary stability compared to the Branemark system, when using the short implants for all three diameters (P ≤ 0.004). However, in medium length implants there were no significant differences between the two implant systems (P ≥ 0.31). In long implants, only when the NP and RP implants were used, the Replace Select system showed significantly higher primary stability compared to the Branemark system (P = 0.000). In the replace select system, long implants had a significantly higher primary stability compared to medium and short length implants (P ≤ 0.003). In the NP and RP Branemark implants, short implants showed significantly lower primary stability compared to medium and long implants (P ≤ 0.002). However, in WP Branemark implants, primary stability increased significantly with increasing the IL from short to medium and from medium to long (P = 0.000). There were also significant differences between NP and the two other wider implants in both systems (P = 0.000). CONCLUSION: The use of tapered implants is recommended, especially, when the use of short implants is necessary. The use of RP implants is also preferred to WP implants, because thicker bone wall will remain in place when applying RP implants. Furthermore, no significant difference was observed between RP and WP implants.

14.
J Dent (Tehran) ; 10(5): 449-55, 2013 Sep.
Article in English | MEDLINE | ID: mdl-24910653

ABSTRACT

OBJECTIVE: The focus of this paper is to evaluate the influence of mechanical characteristics of the implant on primary stability in different bone types, based on resonance frequency analysis (RFA). MATERIALS AND METHODS: A number of 60 Nobel Biocare Replace Select TiUnit Tapered implants of two different lengths (10 mm and 13 mm) and three different widths as 3.4 mm (narrow platform (NP)), 4.3 mm (regular platform (RP)) and 5 mm (wide platform (WP)) were placed into two different groups of bone blocks. Bone blocks were different in bone quality, but similar to bone types D1 and D3. Immediately, after implant placement, implant stability quotient (ISQ) was measured using the Osstell mentor device. RESULTS: ISQ values for implant placements in D1 bone were significantly higher than those for implants placed in D3 bone. In D1 bone, the implant length did not make any significant difference in primary stability; however, in D3 bone, the primary stability of the implant increased when longer implants were utilized. NP implants presented significantly lower ISQ values compared to the two wider implants. CONCLUSION: In cases of low bone quality, the optimum increase in the implant length and diameter should be taken into account to achieve higher primary stability.

SELECTION OF CITATIONS
SEARCH DETAIL
...