High-sensitivity small-molecule detection of microcystin-LR cyano-toxin using a terahertz-aptamer biosensor.

We demonstrate the rapid and highly sensitive detection of a small molecule, microcystin-LR (MC-LR) toxin using an aptasensor based on a terahertz (THz) emission technique named the terahertz chemical microscope (TCM). The main component of the TCM is the sensing plate, which consists of a thin silicon layer deposited on a sapphire substrate, with a natural SiO2 layer formed on the top of the Si layer. The DNA aptamer is linked to the oxidized top surface of the silicon layer by a one-step reaction (click chemistry) between the DBCO-labeled aptamer and an azido group that binds to the surface. Using density functional theory (DFT) calculations, the number of active sites on the surface has been estimated to be 3.8 × 1013 cm-2. Aptamer immobilization and MC-LR binding have been optimized by adjusting the aptamer concentration and the binding buffer composition. When MC-LR binds with the DNA aptamer, it causes a change in the chemical potential at the surface of the sensing plate, which leads to a change in the amplitude of the THz signal. Compared with other bio-sensing methods such as surface plasmon resonance (SPR), TCM is a rapid assay that can be completed in 15 min (10 min incubation and 5 min data acquisition). Moreover, our results show that the aptamer-based TCM can detect MC-LR with an excellent detection limit of 50 ng L-1, which is 20 times more sensitive compared with SPR measurements of MC-LR.

Terahertz time-domain derivative spectrometer using a large-aperture piezoelectric micromachined device.

The engineering of optomechanical systems has exploded over the past decades, with many geometries and applications arising from the coupling of light with mechanical motion. The modulation of electromagnetic radiation in the terahertz (THz) frequency range through optomechanical systems is no exception to this research effort. However, some fundamental modulation capabilities for THz communications and/or high-speed data processing applications are yet to be established. Here, we demonstrate a THz time-domain derivative spectrometer based on a piezoelectric micromachined (PM) device. Insertion of the PM device into the THz beam path provides reference modulation for the lock-in detection unit, which in turn provides access to the nth-order derivative information of the incoming THz signal. Strikingly, the integration of the recorded derived signal leads to a recovered reference signal with an equivalent or even better signal-to-noise ratio, opening the door to a new type of highly sensitive THz measurements in the time domain.

Noninvasive, label-free, and quantitative monitoring of lipase kinetics using terahertz emission technology.

Enzymes catalyze chemical transformations of great importance in many fields, and analysis of the rate of these transformations is equally important. The latter are typically monitored using surrogate substrates that produce quantifiable optical signals, owing to limitations associated with "label-free" techniques that could be used to monitor the transformation of original substrate molecules. In this study, terahertz (THz) emission technology is used as a noninvasive and label-free technique to monitor the kinetics of lipase-induced hydrolysis of several substrate molecules (including the complex substrate whole cow's milk) and horseradish peroxidase-catalyzed oxidation of o-phenylenediamine in the presence of H2 O2 . This technique was found to be quantitative, and kinetic parameters are compared to those obtained by proton NMR spectroscopy or UV/Vis spectroscopy. This study sets the stage for investigating THz emission technology as a tool for research and development involving enzymes, and for monitoring industrial processes in the food, cosmetic, detergent, pharmaceutical, and biodiesel sectors.

Intense terahertz generation from photoconductive antennas.

In this paper, we review the past and recent works on generating intense terahertz (THz) pulses from photoconductive antennas (PCAs). We will focus on two types of large-aperture photoconductive antenna (LAPCA) that can generate high-intensity THz pulses (a) those with large-aperture dipoles and (b) those with interdigitated electrodes. We will first describe the principles of THz generation from PCAs. The critical parameters for improving the peak intensity of THz radiation from LAPCAs are summarized. We will then describe the saturation and limitation process of LAPCAs along with the advantages and disadvantages of working with wide-bandgap semiconductor substrates. Then, we will explain the evolution of LAPCA with interdigitated electrodes, which allows one to reduce the photoconductive gap size, and thus obtain higher bias fields while applying lower voltages. We will also describe recent achievements in intense THz pulses generated by interdigitated LAPCAs based on wide-bandgap semiconductors driven by amplified lasers. Finally, we will discuss the future perspectives of THz pulse generation using LAPCAs.

Stokes-Mueller method for comprehensive characterization of coherent terahertz waves.

Ideally, the full characterization of coherent terahertz (THz) pulses would provide information on the amplitude and direction of its THz electric field, in space and in time, with unlimited dynamic range. Here, we propose and demonstrate a new approach based on the Stokes-Mueller formalism. Our approach can measure the full temporal and spatial variation of coherent THz fields, as well as its polarization state with a high dynamic range. This method employs a simple configuration, using a polarization state analyzer after the electro-optic sampling crystal. This technique could allow high sensitivity due to its ability to use thick detection crystals, which also would lead to improved spectral resolution by allowing longer scans in the time domain.

Room-Temperature and Selective Triggering of Supramolecular DNA Assembly/Disassembly by Nonionizing Radiation.

Recent observations have suggested that nonionizing radiation in the microwave and terahertz (THz; far-infrared) regimes could have an effect on double-stranded DNA (dsDNA). These observations are of significance owing to the omnipresence of microwave emitters in our daily lives (e.g., food preparation, telecommunication, and wireless Internet) and the increasing prevalence of THz emitters for imaging (e.g., concealed weapon detection in airports, skin cancer screenings) and communication technologies. By examining multiple DNA nanostructures as well as two plasmid DNAs, microwaves were shown to promote the repair and assembly of DNA nanostructures and single-stranded regions of plasmid DNA, while intense THz pulses had the opposite effect (in particular, for short dsDNA). Both effects occurred at room temperature within minutes, showed a DNA length dependence, and did not affect the chemical integrity of the DNA. Intriguingly, the function of six proteins (enzymes and antibodies) was not affected by exposure to either form of radiation under the conditions examined. This particular detail was exploited to assemble a fully functional hybrid DNA-protein nanostructure in a bottom-up manner. This study therefore provides entirely new perspectives for the effects, on the molecular level, of nonionizing radiation on biomolecules. Moreover, the proposed structure-activity relationships could be exploited in the field of DNA nanotechnology, which paves the way for designing a new range of functional DNA nanomaterials that are currently inaccessible to state-of-the-art assembly protocols.

Contactless In Situ Electrical Characterization Method of Printed Electronic Devices with Terahertz Spectroscopy.

Printed electronic devices are attracting significant interest due to their versatility and low cost; however, quality control during manufacturing is a significant challenge, preventing the widespread adoption of this promising technology. We show that terahertz (THz) radiation can be used for the in situ inspection of printed electronic devices, as confirmed through a comparison with conventional electrical conductivity methods. Our in situ method consists of printing a simple test pattern exhibiting a distinct signature in the THz range that enables the precise characterization of the static electrical conductivities of the printed ink. We demonstrate that contactless dual-wavelength THz spectroscopy analysis, which requires only a single THz measurement, is more precise and repeatable than the conventional four-point probe conductivity measurement method. Our results open the door to a simple strategy for performing contactless quality control in real time of printed electronic devices at any stage of its production line.

Subcycle Terahertz Nonlinear Optics.

The nonlinear interaction of subcycle electromagnetic radiation with matter is the current frontier in ultrafast nonlinear optics and high-field physics. Here, we investigate nonlinear optical effects induced by intense, subcycle terahertz radiation in a doped semiconductor. We observe a truncation of the half-cycle terahertz pulse and an emission of high-frequency terahertz photons. We attribute our observations to the abrupt current drop caused by strong intervalley scattering effects. By adding an extra half-cycle terahertz pulse with opposite polarity, we monitor the evolution of the nonlinear carrier dynamics during a quasi-single-cycle pulse. Our results demonstrate the differences between nonlinear effects for subcycle and multicycle terahertz pulses. It also suggests a new approach to subcycle control of terahertz waveforms, and the generation of high-order terahertz harmonics could be realized by using multicycle pulses.

Adaptive spatiotemporal optical pulse front tilt using a digital micromirror device and its terahertz application.

We report a new method to temporally and spatially manipulate the pulse front tilt (PFT) intensity profile of an ultrashort optical pulse using a commercial microelectromechanical system, also known as a digital micromirror device (DMD). For our demonstration, we show terahertz generation in a lithium niobate crystal using the PFT pumping scheme derived from a DMD chip. The adaptive functionality of the DMD could be a convenient alternative to the more conventional grating required to generate a laser beam with a PFT intensity profile that is typically used for efficient optical rectification in noncollinear phase-matching conditions. In contrast to a grating, PFT using DMD does not suffer from wavelength dispersion, and exhibits overlap properties between grating and a stair-step echelon mirror.

MV/cm terahertz pulses from relativistic laser-plasma interaction characterized by nonlinear terahertz absorption bleaching in n-doped InGaAs.

We have developed a tabletop intense broadband terahertz (THz) source in the medium frequency range (≤ 20 THz) based on the interaction of a high-intensity femtosecond laser with solid targets at relativistic laser intensities. When an unpolished copper target is irradiated with a high-intensity femtosecond laser, a maximum of ~2.2 µJ of THz pulse energy is collected and detected with a calibrated pyroelectric detector. The THz spectrum was measured by using a series of bandpass filters, showing a bandwidth of ~7.8 THz full-width at half-maximum (FWHM) with a peak at ~6 THz. With tight focusing to reach high field strengths, we have demonstrated THz nonlinearity exemplified by THz absorption bleaching in a heavily n-doped InGaAs thin film, which enabled us to estimate the peak electric field of the THz pulses. We simulated the experimentally observed bleaching by employing a THz pulse having a bandwidth similar to that measured in our experiments and a temporal profile recoded in single-shot electro-optic detection. Through the simulations, we estimate a peak electric field associated with the THz pulses to be 2.5 MV/cm.

Active terahertz two-wire waveguides.

We demonstrate, by generating a THz electric field directly within the guiding structure, an active two-wire waveguide operating in the terahertz (THz) range of wavelengths. We compare the energy throughput of the active configuration with that of a radiatively coupled semi-large photoconductive antenna, in which the radiation is generated outside the waveguide, reporting a 60 times higher energy throughput for the same illumination power and applied voltage. This novel, active waveguide design allows to have efficient coupling of the THz radiation in a dispersion-less waveguide without the need of involved radiative coupling geometries.

THz pulse shaping and improved optical-to-THz conversion efficiency using a binary phase mask.

We demonstrate improved optical-to-terahertz (THz) conversion efficiency and THz pulse shaping from an interdigitated GaAs large area photoconductive antenna by using a binary phase mask. The binary phase mask results in a time-delayed excitation of the adjacent antennas, which allows subsequent antennas to produce an additive field, thus resulting in a quasi-single-cycle THz pulse. We demonstrate control over the temporal profile of the THz waveform to maximize optical-to-THz conversion efficiency.