UV-Femtosecond-Laser Structuring of Cyclic Olefin Copolymer.

We report on the laser ablation of cyclic olefin copolymer using an amplified ultrashort pulsed laser in the ultraviolet spectral range. In addition to a high ablation depth per laser-structured layer up to 74 µm at a fluence of 22 J cm-2, an excellent mean roughness Ra of laser-patterned surfaces down to 0.5 µm is demonstrated. Furthermore, with increasing fluence, increasing ablation efficiencies up to 2.5 mm3 W-1 min-1 are determined. Regarding the quality of the ablation, we observed steep ablation flanks and low debris formation, though for fluences above 10.5 J cm-2 the formation of troughs was observed, being attributed to multiple reflections on the ablation flanks. For comparison, laser ablation was performed under identical conditions with an infrared laser wavelength. The results highlight that UV ablation exhibits significant advantages in terms of ablation efficiency, surface roughness and quality. Moreover, our results show that a larger UV focus spot accelerates the ablation process with comparable quality, paving the way for high-power UV ultrashort pulsed lasers towards an efficient and qualitative tool for the laser machining of cyclic olefin copolymer. The production of complex microfluidics further underlines the suitability of this type of laser.

Ultrashort Pulsed Laser Drilling of Printed Circuit Board Materials.

We report on a comprehensive study of laser percussion microvia drilling of FR-4 printed circuit board material using ultrashort pulse lasers with emission in the green spectral region. Laser pulse durations in the pico- and femtosecond regime, laser pulse repetition rates up to 400 kHz and laser fluences up to 11.5 J/cm2 are applied to optimize the quality of microvias, as being evaluated by the generated taper, the extension of glass fiber protrusions and damage of inner lying copper layers using materialography. The results are discussed in terms of the ablation threshold for FR-4 and copper, heat accumulation and pulse shielding effects as a result of pulse to pulse interactions. As a specific result, using a laser pulse duration of 2 ps appears beneficial, resulting in small glass fiber protrusions and high precision in the stopping process at inner copper layer. If laser pulse repetition rates larger than 100 kHz are applied, we find that the processing quality can be increased by heat accumulation effects.

Fabrication and evaluation of negative axicons for ultrashort pulsed laser applications.

We report on the fabrication and evaluation of a sharp tip negative axicon paving the way for applications in high-power ultrashort pulsed laser systems. The negative axicon is manufactured by applying a two-step all laser-based process chain consisting of ultrashort pulsed laser ablation and CO2 laser polishing finishing the component in less than 5 minutes. The finalized negative axicon reveals a surface roughness of 18 nm, fulfilling optical quality. Two measurement setups, including the ultrashort pulsed laser itself, are used to evaluate the formation of Bessel beams in detail. By applying a focusing lens behind the negative axicon, well-developed Bessel beams are generated while their lengths depend on the distance between the negative axicon and the lens. Furthermore, the diameter of the Bessel beams increase strongly with the propagation distance. By adding a second focusing lens, Bessel beams are generated at its focal position, being almost invariant of its position. Hence, the typical Bessel beam intensity distribution is observed over an entire moving range of this second lens of 300 mm. While these Bessel beams show superior quality in terms of sharp peaks with homogeneous concentric rings, only minor deviations in intensity and diameter are observed over the moving range.

Femtosecond laser inscription of waveguides and Bragg gratings in transparent cyclic olefin copolymers.

We report on a femtosecond laser based fabrication technique that enables simultaneous single-step generation of optical waveguides and Bragg gratings inside bulk cyclic olefin copolymers. Due to the nonlinear absorption of focused and spatially modulated laser radiation with a wavelength of 514 nm and a pulse duration of 450 fs, a modification concluding a refractive index shift increase inside the substrate can be achieved. A sophisticated characterization of the generated waveguides by means of an elaborate cut-back method reveals a maximum attenuation of 3.2 dB/cm. Additionally, a Mach-Zehnder interferometer is used to examine the waveguide's refractive index profile. The integrated Bragg grating structures exhibit reflectivities up to 95 % and a spectral full width at half maximum of 288 pm, at a Bragg wavelength of 1582 nm, whereas the grating period can be deliberately chosen by adapting the fabrication parameters. Thus, due to its increased flexibility and the resulting dispensability of cost-intensive phase masks, this method constitutes an especially promising fabrication process for polymer Bragg gratings inside of bulk materials.

Microchannels inside bulk PMMA generated by femtosecond laser using adaptive beam shaping.

In this contribution, we report on the generation of internal microchannels with basically unlimited channel length inside of PMMA bulk material by femtosecond laser. A precisely controllable and stable circular channel cross section is obtained by using a spatial light modulator to compensate the writing depth depending spherical aberration. Furthermore, the generation of a rotatable elliptical input beam by adaptive optics ensures a fitting of the beam shaping to the writing direction. In this study, we report on both, the effect of the ellipticity of the input beam and the effect of a correction of the spherical aberration on the circularity of the resulting internal microchannels. Moreover, we demonstrate the application of this writing technique by creating microfluidic testing structures inside of a transparent standard polymer.

Towards a versatile point-of-care system combining femtosecond laser generated microfluidic channels and direct laser written microneedle arrays.

Microneedle-based microfluidic systems have a great potential to become well-accepted medical devices for simple, accurate, and painless drug delivery and lab-on-a-chip diagnostics. In this work, we report on a novel hybrid approach combining femtosecond direct laser written microneedles with femtosecond laser generated microfluidic channels providing an important step towards versatile medical point-of-care systems. Hollow microneedle arrays are fabricated by a laser system designed for two-photon polymerization applications. Compression tests of two different types of truncated cone-shaped microneedle arrays prepared from OrmoComp® give information about the microneedle mechanical strength, and the results are compared to skin insertion forces. Three-dimensional microchannels are directly created inside PMMA bulk material by an ultrashort pulse laser system with vertical channels having adjustable cross-sectional areas, which allow attaching of microneedles to the microfluidic system. A comprehensive parameter study varying pulse duration and repetition rate is performed on two-photon polymerization to identify an optimal laser power range for fabricating microneedles using the same pulse duration and repetition rate as for microchannels. This addresses the advantage of a single laser system process that overcomes complex fabrication methods. A proof of concept flow test with a rhodamine B dye solution in distilled water demonstrates that the combination of microneedles and microchannels qualifies for microfluidic injection and extraction applications.

High-temperature stable and sterilizable waveguide Bragg grating in planar cyclo-olefin copolymer.

In this Letter, we demonstrate a high-temperature stable polymer planar waveguide Bragg grating based on cyclo-olefin copolymers. The high glass transition temperature of the polymer material amounting to 178°C, in conjunction with a high-temperature stable UV-curable adhesive used to connect the polymer sensor to a standard single-mode fiber, enables temperature readings of up to 160°C while exhibiting a temperature sensitivity of -7.3 pm/°C. The reflected power of the Bragg wavelength remains constant up to a temperature of 130°C before declining at higher temperatures with an overall reduction of 2.5 dB at 160°C. However, decreasing temperature results in a complete recovery of the peak power, facilitating steam pressure sterilization (129°C, 0.17 MPa) of the polymer planar waveguide Bragg grating.

Femtosecond laser direct generation of 3D-microfluidic channels inside bulk PMMA.

We report on laser direct generation of 3D-microchannels for microfluidic applications inside PMMA bulk material by focused femtosecond pulses. Inner lying channels with cross sectional areas from 100 µm2 to 4400 µm2 are directly created in the volume of a PMMA substrate. Using the presented process, the channel length is fundamentally unlimited. Here we demonstrate a channel length of 6 meters inside a substrate with dimensions of 20 × 20 × 1.1 mm. The formation of the micro channels is based on nonlinear absorption around the focal volume that triggers a material modification. The modified volume can be selectively opened to form the channel by a subsequent annealing process. The cross section of the channel is strongly influenced by the energy distribution and illumination around the focal volume determined by the optical setup and process design. The 3D channel layout can easily be realized by moving the specimen using 3D motorized stage, allowing freely chosen complex shaped channel architectures. Within a comprehensive parameter study, varying laser power, number of multi-passes, writing speed and writing depths, we identify an optimized process in terms of attainable channel height, width and aspect ratio, as well as process stability and reproducibility. The proof of concept for an application in three dimensional microfluidic systems is provided by florescence microscopy using a dye rhodamine B solution in isopropanol.