Ultrahigh water sorption on highly nitrogen doped carbonaceous materials derived from uric acid.

HYPOTHESIS: Developing materials for thermally driven adsorption chillers and adsorption heat pumps is a growing research field due to the potential of these technologies to address up to 50% of the world's total energy demand. These materials must be abundant, easy to synthesize, hydrophilic, and low in cost. Bare carbon materials are hydrophobic and therefore usually not considered for these applications. However, by introducing heteroatoms and tuning their porosity, the hydrophilicity of carbonaceous networks can be increased significantly. EXPERIMENTAL: Herein, a series of highly nitrogen doped carbonaceous materials (CNs) have been synthesized by submitting uric acid to heat treatment at different temperatures in the presence of an inorganic salt mix as solvent and pore template. The effect of the thermal treatment on the materials composition, pore network, and water sorption capability has been studied. FINDINGS: At 800 °C, a nitrogen depleted carbonaceous material with a maximal water uptake of 1.38gH2O g-1 is obtained. Condensation at 750 °C creates an ultra-hydrophilic CN with a water uptake of 0.8 gH2O g-1 at already much lower partial pressures. While the maximum uptake is mainly ascribed to the mesopore volume of the material, the differences in hydrophilicity can be controlled by functionality.

Eutectic Syntheses of Graphitic Carbon with High Pyrazinic Nitrogen Content.

Mixtures of phenols/ketones and urea show eutectic behavior upon gentle heating. These mixtures possess liquid-crystalline-like phases that can be processed. The architecture of phenol/ketone acts as structure-donating motif, while urea serves as melting-point reduction agent. Condensation at elevated temperatures results in nitrogen-containing carbons with remarkably high nitrogen content of mainly pyrazinic nature.

Modular thiol-ene chemistry approach towards mesoporous silica monoliths with organically modified pore walls.

The surface modification of mesoporous silica monoliths through thiol-ene chemistry is reported. First, mesoporous silica monoliths with vinyl, allyl, and thiol groups were synthesized through a sol-gel hydrolysis-polycondensation reaction from tetramethyl orthosilicate (TMOS) and vinyltriethoxysilane, allyltriethoxysilane, and (3-mercaptopropyl)trimethoxysilane, respectively. By variation of the molar ratio of the comonomers TMOS and functional silane, mesoporous silica objects containing different amounts of vinyl, allyl, and thiol groups were obtained. These intermediates can subsequently be derivatized through radical photoaddition reactions either with a thiol or an olefin, depending on the initial pore wall functionality, to yield silica monoliths with different pore-wall chemistries. Nitrogen sorption, small-angle X-ray scattering, solid-state NMR spectroscopy, elemental analysis, thermogravimetric analysis, and redox titration demonstrate that the synthetic pathway influences the morphology and pore characteristics of the resulting monoliths and also plays a significant role in the efficiency of functionalization. Moreover, the different reactivity of the vinyl and allyl groups on the pore wall affects the addition reaction, and hence, the degree of the pore-wall functionalization. This report demonstrates that thiol-ene photoaddition reactions are a versatile platform for the generation of a large variety of organically modified silica monoliths with different pore surfaces.

Renewable nitrogen-doped hydrothermal carbons derived from microalgae.

Nitrogen-doped carbon materials are synthesized via an effective, sustainable, and green one-step route based on the hydrothermal carbonization of microalgae with high nitrogen content (ca. 11 wt %). The addition of the monosaccharide glucose to the reaction mixture is found to be advantageous, enhancing the fixation of nitrogen in the synthesized carbons, resulting in materials possessing nitrogen content in excess of 7 wt %, and leading to promising reaction yields. Increasing the amount of glucose leads to a higher nitrogen retention in the carbons, which suggests co-condensation of the microalgae and glucose-derived degradation/hydrolysis products via Maillard-type cascade reactions, yielding nitrogen-containing aromatic heterocycles (e.g., pyrroles) as confirmed by several analytical techniques. Increasing the HTC processing temperature leads to a further aromatization of the chemical structure of the HTC carbon and the formation of increasingly more condensed nitrogen-containing functional motifs (i.e., pyridinic and quaternary nitrogen).