Reliability of surface electromyographic (sEMG) measures of equine axial and appendicular muscles during overground trot.

The reliability of surface electromyography (sEMG) has not been adequately demonstrated in the equine literature and is an essential consideration as a methodology for application in clinical gait analysis. This observational study investigated within-session, intra-subject (stride-to-stride) and inter-subject reliability, and between-session reliability of normalised sEMG activity profiles, from triceps brachii (triceps), latissimus dorsi (latissimus), longissimus dorsi (longissimus), biceps femoris (biceps), superficial gluteal (gluteal) and semitendinosus muscles in n = 8 clinically non-lame horses during in-hand trot. sEMG sensors were bilaterally located on muscles to collect data during two test sessions (session 1 and 2) with a minimum 24-hour interval. Raw sEMG signals from ten trot strides per horse and session were DC-offset removed, high-pass filtered (40 Hz), full-wave rectified, and low-pass filtered (25 Hz). Signals were normalised to peak amplitude and percent stride before calculating intra- and inter-subject ensemble average sEMG profiles across strides for each muscle and session. sEMG profiles were assessed using waveform similarity statistics: the coefficient of variation (CV) to assess intra- and inter-subject reliability and the adjusted coefficient of multiple correlation (CMC) to evaluate between-session reliability. Across muscles, CV data revealed that intra-horse sEMG profiles within- and between-sessions were comparatively more reliable than inter-horse profiles. Bilateral gluteal, semitendinosus, triceps and longissimus (at T14 and L1) and right biceps showed excellent between-session reliability with group-averaged CMCs > 0.90 (range 0.90-0.97). Bilateral latissimus and left biceps showed good between-session reliability with group-averaged CMCs > 0.75 (range 0.78-0.88). sEMG profiles can reliably describe fundamental muscle activity patterns for selected equine muscles within a test session for individual horses (intra-subject). However, these profiles are more variable across horses (inter-subject) and between sessions (between-session reliability), suggesting that it is reasonable to use sEMG to objectively monitor the intra-individual activity of these muscles across multiple gait evaluation sessions at in-hand trot.

The effect of cut-off frequency when high-pass filtering equine sEMG signals during locomotion.

High-pass filtering (HPF) is a fundamental signal processing method for the attenuation of low-frequency noise contamination, namely baseline noise and movement artefact noise, in human surface electromyography (sEMG) research. Despite this, HPF is largely overlooked in equine sEMG research, with many studies not applying, or failing to describe, the application of HPF. An optimal HPF cut-off frequency maximally attenuates noise while minimally affecting sEMG signal power, but this has not been investigated for equine sEMG signals. The aim of this study was to determine the optimal cut-off frequency for attenuation of low-frequency noise in sEMG signals from the Triceps Brachii and Biceps Femoris of 20 horses during trot and canter. sEMG signals were HPF with cut-off frequencies ranging from 0 to 80 Hz and were subjected to power spectral analysis and enveloped using RMS to calculate spectral peaks, indicative of motion artefact, and signal loss, respectively. Processed signals consistently revealed a low-frequency peak between 0 and 20 Hz, which was associated with motion artefact. Across all muscles and gaits, a 30-40 Hz cut-off fully attenuated the low-frequency peak with the least amount of signal loss and was therefore considered optimal for attenuating low-frequency noise from the sEMG signals explored in this study.

Electro-mechanical stability of surface EMG sensors.

This study compared the performance of surface electromyographic (sEMG) sensors for different detection conditions affecting the electro-mechanical stability between the sensor and its contact with the skin. These comparisons were made to gain a better understanding of how specific characteristics of sensor design and use may alter the ability of sEMG sensors to detect signals with high fidelity under conditions of vigorous activity. The first part of the study investigated the effect of different detection surface contours and adhesive tapes on the ability of the sensor to remain in electrical contact with the skin. The second part of the study investigated the effects of different skin preparations and hydrophilic gels on the production of movement artifact resulting from sinusoidal and impact mechanical perturbations. Both parts of the study evaluated sensor performance under dry skin and wet skin (from perspiration) conditions. We found that contouring the detection surface and adding a more adhesive double-sided tape were effective in increasing the forces needed to disrupt the electrical contact between the electrodes and the skin for both dry skin and wet skin conditions. The mechanical perturbation tests demonstrated that hydrophilic gel applied to the detection surface of the sensor produced greater movement artifacts compared to sensors without gel, particularly when the sensors were tested under conditions in which perspiration was present on the skin. The use of a surfactant skin preparation did not influence the amount of movement artifacts that resulted from either the sinusoidal or impact perturbations. The importance of these findings is discussed in terms of their implications for improving sEMG signal fidelity through sensor design modifications and procedures for interfacing them with the skin.

Coordination training in individuals with incomplete spinal cord injury: consideration of motor hierarchical structures.

STUDY DESIGN: Clinical commentary. OBJECTIVE: To discuss the method of coordination training to enhance motor skills in persons after spinal cord injury (SCI). METHOD: From the literature and clinical experience, we learn that basic motor skills like walking are refined and maintained through the millions of repetitions that take place as part of normal development. These coordinated patterns function effectively as a form of training to the system because of the presence of neural pathways that mediate commands between higher and lower levels of the central nervous system (CNS). When these pathways are disrupted as a result of a lesion, the question that arises is whether retraining can be effective. RESULTS/DISCUSSION: The question is directed at the common practice among rehabilitation professionals to prescribe and carry out tireless repetitions of coordinated motor activities in people with SCI lesions. We discuss this fundamental question from the perspective of understanding differences in maturation and function of higher motor centres and lower motor centres.

Muscle fatigue and fatigue-related biomechanical changes during a cyclic lifting task.

STUDY DESIGN: Electromyographic and biomechanical methods were utilized to investigate correlations between indexes of localized muscle fatigue and changes in the kinematics and kinetics of motion during a cyclic lifting task. SUMMARY OF BACKGROUND DATA: Recent advances in time-frequency analysis procedures for electromyographicic signal processing provide a new way of studying localized muscle fatigue during dynamic contractions. These methods provide a means to investigate fatigue-related functional impairments in patients with low back pain. OBJECTIVES: To study the relationship between localized muscle fatigue and the biomechanics of lifting and lowering a weighted box. Fatigue-related changes in the electromyographicic signal of trunk and limb muscles were evaluated and compared to kinematic and kinetic measures in order to determine whether lifting strategy is modified with fatigue. METHODS: A total of 14 healthy male subjects (26 +/- 5 years) cyclically lifted and lowered a 13 kg box (12 lifts/min) for 4.5 minutes. A 5-second static maximum lifting task was included immediately before and after the cyclic lifting task to measure changes in lifting strength and static electromyographicic fatigue indexes. Electromyographic signals from 14 muscle sites (including paravertebral and limb muscles) were measured. Changes in the electromyographicic Instantaneous Median Frequency, a fatigue index, were computed using time-frequency analysis methods. This index was compared with more standardized measures of fatigue, such as those based on electromyographicic median frequency acquired during a static trunk extension test, subjective fatigue measures, and maximal static lifting strength. Biomechanical measures were gathered using a motion analysis system to study kinematic and kinetic changes during the lifting task. RESULTS: During the cyclic lifting task, the electromyographic Instantaneous Median Frequency significantly decreased over time in the paravertebral muscles, but not in the limb muscles. Paravertebral electromyographicic Instantaneous Median Frequency changes were consistent with self-reports of fatigue as well as decreases in trunk extension strength. The magnitude of muscle-specific changes in electromyographicic Instantaneous Median Frequency was not significantly correlated with electromyographicic median frequency changes from the static trunk extension task. The load of the box relative to the maximal static lifting strength significantly affected the electromyographicic Instantaneous Median Frequency changes of paravertebral back muscles. Significant changes with fatigue during the task were found in the angular displacements at the knee, hip, trunk, and elbow. These biomechanical changes were associated with increased peak torque and forces at the L4-L5 vertebral segment. CONCLUSIONS: Our results demonstrate correlation between localized muscle fatigue and biomechanical adaptations that occur during a cyclic lifting task. This new technique may provide researchers and clinicians with a means to investigate fatigue-related effects of repetitive work tasks or assessment procedures that might be useful in improving education, lifting ergonomy, and back school programs. Although both the dynamic and static tasks resulted in spectral shifts in the electromyographicic data, the fact that these methods led to different muscle-specific findings indicates that they should not be considered as equivalent assessment procedures.

Time-frequency parameters of the surface myoelectric signal for assessing muscle fatigue during cyclic dynamic contractions.

The time-dependent shift in the spectral content of the surface myoelectric signal to lower frequencies has proven to be a useful tool for assessing localized muscle fatigue. Unfortunately, the technique has been restricted to constant-force, isometric contractions because of limitations in the processing methods used to obtain spectral estimates. A novel approach is proposed for calculating spectral parameters from the surface myoelectric signal during cyclic dynamic contractions. The procedure was developed using Cohen class time-frequency transforms to define the instantaneous median and mean frequency during cyclic dynamic contractions. Changes in muscle length, force, and electrode position contribute to the nonstationarity of the surface myoelectric signal. These factors, unrelated to localized fatigue, can be constrained and isolated for cyclic dynamic contractions, where they are assumed to be constant for identical phases of each cycle. Estimation errors for the instantaneous median and mean frequency are calculated from synthesized signals. It is shown that the instantaneous median frequency is affected by an error slightly lower than that related to the instantaneous mean frequency. In addition, we present a sample application to surface myoelectric signals recorded from the first dorsal interosseous muscle during repetitive abduction/adduction of the index finger against resistance. Results indicate that the variability of the instantaneous median frequency is related to the repeatability of the biomechanics of the exercise.

Modeling of surface myoelectric signals--Part II: Model-based signal interpretation.

Experimental electromyogram (EMG) data from the human biceps brachii were simulated using the model described in [10] of this work. A multichannel linear electrode array, spanning the length of the biceps, was used to detect monopolar and bipolar signals, from which double differential signals were computed, during either voluntary or electrically elicited isometric contractions. For relatively low-level voluntary contractions (10%-30% of maximum force) individual firings of three to four-different motor units were identified and their waveforms were closely approximated by the model. Motor unit parameters such as depth, size, fiber orientation and length, location of innervation and tendonous zones, propagation velocity, and source width were estimated using the model. Two applications of the model are described. The first analyzes the effects of electrode rotation with respect to the muscle fiber direction and shows the possibility of conduction velocity (CV) over- and under-estimation. The second focuses on the myoelectric manifestations of fatigue during a sustained electrically elicited contraction and the interrelationship between muscle fiber CV, spectral and amplitude variables, and the length of the depolarization zone. It is concluded that a) surface EMG detection using an electrode array, when combined with a model of signal propagation, provides a useful method for understanding the physiological and anatomical determinants of EMG waveform characteristics and b) the model provides a way for the interpretation of fatigue plots.

EMG assessment of back muscle function during cyclical lifting.

A new approach to estimating the frequency compression of the surface EMG signal during cyclical dynamic exercise is described. The basic properties of the method are first developed using simulated EMG signals. Spectral compression is measured by defining the instantaneous median frequency from time-frequency representations of the signal derived from a transformation of the Cohen class. The technique is then used to process real EMG signals from paraspinal muscles during repetitive lifting. Our purpose was to use this new procedure to identify (a) whether changes in the instantaneous median frequency among concurrently active paraspinal muscles during repetitive trunk extension produces a 'fatigue pattern' that is indicative of normal functioning, and (b) whether this pattern is different when the subject produces a sustained isometric trunk extension. Four healthy subjects (26 +/- 4 years; 3 males, 1 female) were tested in both a Back Analysis System, for the production of a sustained static isometric contraction, and a LIDO-Lift Controller (Loredan), for repetitive lifting and lowering of a weighted box. EMG signals were recorded concurrently from six bilateral lumbar paraspinal regions during these tasks. The results demonstrate that static and dynamic tasks result in very different patterns of EMG spectral changes, suggestive of differences in load-sharing and underlying metabolic fatigue processes. Unlike the linear decrease in median frequency observed for static contractions, during dynamic contractions instantaneous median frequency behavior is non-linear and more complex. Examples are provided in which distinct periods of instantaneous median frequency decay are followed by periods of recovery during a single trial of repetitive lifting. It is hypothesized that this difference reflects a complex strategy of utilizing muscle load-sharing during strenuous dynamic exercise to provide periods of metabolic recovery that limit localized fatigue. New analysis procedures to characterize this complex behavior are needed to enhance the technique for assessment of impairment in patients with lower back pain.

Classification of paraspinal muscle impairments by surface electromyography.

The purpose of this article is to provide an overview of research to develop surface electromyographic (EMG) measurements for classification of paraspinal muscle impairments in persons with low back pain (LBP). The process of developing laboratory and clinically based protocols is described. Results of studies to evaluate the reliability of these measurements and their relationships with impairments and function are discussed. Research efforts to incorporate EMG spectral measurements, such as the median frequency, into a classification system to identify different types of muscle impairments are documented. Discriminant functions have been calculated based on case-control studies to identify 2 kinds of LBP impairments from constant-force isometric tasks: (1) excessive fatigue due to muscle deconditioning and (2) inhibition of muscle activation secondary to pain or pain-related behaviors. New areas of investigation designed to improve the classification accuracy of such functions using procedures other than discriminant analysis are described. Work in progress to extend the application of the technique to tasks other than those involving just isometric contraction, including those involving repetitive trunk movement, is also described.

Classification of back muscle impairment based on the surface electromyographic signal.

A surface electromyographic (EMG) procedure for classifying muscle impairments in persons with low back pain (LBP) is described. The procedure was studied using a device, the Back Analysis System (BAS), to acquire and process EMG signals from six bilateral muscle sites during sustained isometric contractions designed to progressively fatigue the lower back. Back muscle impairment was determined on the basis of the different ways in which the EMG median frequency parameters change as a function of contraction duration and muscle site. The article describes a series of studies that have been useful in developing an automated procedure for identifying back muscle impairment by comparing individual test results to a normative database. To date, the research results have produced multivariate discriminant functions that have identified two muscle impairment categories associated with deconditioning and imbalances secondary to LBP. We have found that the functions can distinguish individuals with and without LBP with an accuracy of approximately 90%. Other studies are described in which the technique is applied to monitoring changes in muscle performance capability that occur following rehabilitation for LBP. Many of our findings here are also compared to the results of independent studies by others using similar procedures. The need for further research and development of the technique to improve its clinical applicability is also described.

Development of new protocols and analysis procedures for the assessment of LBP by surface EMG techniques.

Spectral parameters of the surface electromyographic (EMG) signal from lumbar back muscles assessed during a fatiguing isometric contraction can be used to classify different categories of low back pain (LBP) subjects and control subjects without LBP. In the test protocol currently used at the NeuroMuscular Research Center at Boston University, subjects contract their back muscles at 80% of their maximal voluntary contraction (MVC) force. This fatigue-based protocol has been successfully applied to persons with subacute or chronic LBP; those in acute pain, however, have not been included because of their inability to perform a maximal exertion. In this paper we will examine the force sensitivity of the currently used EMG parameters and also give an overview of some of our efforts to develop new test procedures. Our goal is to develop force-insensitive surface EMG parameters that can be used for classification purposes in populations of subjects who develop low trunk extension forces. In addition, the development of a model to predict MVC from anthropometrical measurements will be presented.

Evaluation of forearm fatigue during EVA pressure glove work.

This study investigated the combined use of three measurement techniques to monitor fatigue in forearm muscles during pressure glove work. Pressurized gloves are a component of the spacesuit used by shuttle astronauts during extravehicular activities (EVA). The study was conducted to specifically evaluate and compare the effects of pressure and non-pressure components of the glove on work and fatigue. Ten healthy male subjects were recruited to perform a constrained task of repetitively squeezing a custom hand-grip dynamometer adjusted for constant resistance. Surface electromyographic (EMG) signals from two muscles of the forearm (m. extensor carpi ulnaris (ECU) and m. flexor digitorum superficialis (FDS)) were recorded concurrently with mechanical work and subjective fatigue. Measurements were made before, during, and after the repetitive gripping task. Each subject performed the test under three conditions: (1) bare hand, (2) gloved-hand without a pressure differential, and (3) gloved-hand with a pressure differential equal to the normal operating pressure of the shuttle glove. The results demonstrated that the three measurement procedures provided complementary information about the interrelationship between glove characteristics, muscle function, and work productivity. The EMG results from the FDS muscle indicated that the resistance offered by the glove materials provided a component of fatigue that was compounded by the presence of differential pressure. Although not muscle specific, measurements of work output and subjective fatigue supported this finding. In contrast to the FDS, the EMG results from the ECU muscle indicated that this muscle was less fatigued overall and less sensitive to the test conditions. Although high inter-subject variability precluded a statistically significant effect of test condition on the EMG results from the ECU muscle, 8 of the 10 subjects had higher EMG manifestations of fatigue for bare hand work than for either gloved-hand condition. We interpret these findings as evidence that the stiffness of the glove may have provided support to the wrist, thereby reducing the amount of fatigue present in this muscle during the work task. The study findings demonstrate the feasibility of using this multidimensional approach to fatigue measurement when evaluating other work-related tasks.

Dynamic evaluation of exercising leg muscle in healthy subjects with echo planar MR imaging: work rate and total work determine rate of T2 change.

Echo planar MR imaging of the leg was performed in nine healthy volunteers to better understand the dynamic relationship between exercise and changes in muscle T2. Imaging and T2 calculation was performed before, during, and after ankle dorsiflexion exercises using a TR of 9 seconds and a TE of 60 msec. Performing 9-second duty cycles, six of the subjects exercised for sets of 12 duty cycles, three with a graded series of weights and pulleys and three with an isometric orthotic device graded in varying percentages of maximum voluntary contraction. The other three volunteers performed duty cycles to fatigue. Gastrocnemius and soleus muscle T2 relaxation times were unchanged before, during, and after exercise. The tibialis anterior muscle showed an initial brief 1.7-6.2% decrease in T2 values after starting exercise, followed by a linear increase. Maximum T2 values and percent changes were higher for higher work rates (P < .05), and the rate of T2 change increased in a linear fashion with increasing work rates. By using rapid serial MR imaging, we show that the rate of muscle T2 change bears a simple linear relationship to muscle work. This technique may be exploited in both diagnostic and rehabilitation procedures.

Effects of muscle fiber type and size on EMG median frequency and conduction velocity.

This paper describes an in vitro method for comparing surface-detected electromyographic median frequency (MF) and conduction velocity (CV) parameters with histochemical measurements of muscle fiber type composition and cross-sectional area (CSA). Electromyographic signals were recorded during electrically elicited tetanic contractions from rat soleus, extensor digitorum longus, and diaphragm muscles placed in an oxygenated Krebs bath. Fibers were typed as slow oxidative, fast oxidative glycolytic, and fast glycolytic based on histochemical enzyme stains. Muscles with a greater percentage of fast glycolytic and fast oxidative glycolytic fibers exhibited greater initial values of MF and CV as well as a greater reduction in these variables over the course of the contraction. Regression indicated that fiber type composition could be predicted based on two MF parameters. A weighted measure of muscle fiber CSA was found to be linearly related to both initial MF and CV. The results of this study suggest that MF and CV parameters recorded during a muscular contraction are related to muscle fiber type composition and muscle fiber CSA.

Spectral electromyographic assessment of back muscles in patients with low back pain undergoing rehabilitation.

STUDY DESIGN: A surface electromyographic procedure for evaluating back muscle impairment was studied in patients undergoing rehabilitation for low back pain. OBJECTIVES: The results were analyzed to determine whether the electromyographic procedure was able to: 1) distinguish muscle impairment between patients with low back pain and normal subjects, and 2) monitor changes in muscle function after low back pain rehabilitation. METHODS: Patients with chronic low back pain (n = 85) were tested to measure the median frequency of the electromyographic signals from six lumbar electrode sites during sustained trunk extensions. A subset (n = 28) of these patients was re-tested after low back pain rehabilitation. A discriminant function for classifying subjects into "low back pain" and "normal" groups was formulated using the electromyographic data from a subset of the patients with low back pain (n = 28) and a normative sample (n = 42). Results for this "learning" sample were compared with results using the same function on the remaining "holdout" sample of patients (n = 57) and an additional normative sample (n = 6). Differences in electromyographic parameters before and after rehabilitation also were analyzed. RESULTS: The discriminant function classified subjects into low back pain and normal groups, with 86% and 89% correct classification for the "learning" and "holdout" samples, respectively. These classification results were independent of trunk extensor strength. Changes in median frequency after the rehabilitation program were consistent with improvements in back muscle fatigability. CONCLUSION: These findings demonstrate how electromyographic spectral measurements may be used to identify and monitor back muscle impairment in patients undergoing rehabilitation for low back pain.

The effects of spaceflight on open-loop and closed-loop postural control mechanisms: human neurovestibular studies on SLS-2.

Stabilogram-diffusion analysis was used to examine how prolonged periods in microgravity affect the open-loop and closed-loop postural control mechanisms. It was hypothesized that following spaceflight: (1) the effective stochastic activity of the open-loop postural control schemes in astronauts is increased; (2) the effective stochastic activity and uncorrelated behavior, respectively, of the closed-loop postural control mechanisms in astronauts are increased; and (3) astronauts utilized open-loop postural controls schemes for shorter time intervals and smaller displacements. Four crew members and two alternates from the 14-day Spacelab Life Sciences 2 Mission were included in the study. Each subject was tested under eyes-open, quiet-standing conditions on multiple preflight and postflight days. The subjects' center-of-pressure trajectories were measured with a force platform and analyzed according to stabilogram-diffusion analysis. It was found that the effective stochastic activity of the open-loop postural control schemes in three of the four crew members was increased following spaceflight. This result is interpreted as an indication that there may be in-flight adaptations to higher-level descending postural control pathways, e.g., a postflight increase in the tonic activation of postural muscles. This change may also be the consequence of a compensatory (e.g., "stiffening") postural control strategy that is adopted by astronauts to account for general feeling of postflight unsteadiness. The crew members, as a group, did not exhibit any consistent preflight/postflight differences in the steady-state behavior of their closed-loop postural control mechanisms or in the functional interaction of their open-loop and closed-loop postural control mechanisms. These results are interpreted as indications that although there may be in-flight adaptations to the vestibular system and/or proprioceptive system, input from the visual system can compensate for such changes during undisturbed stance.

Lack of association between fibromyalgia syndrome and abnormalities in muscle energy metabolism.

OBJECTIVE: To compare parameters of muscle energy metabolism in patients with fibromyalgia syndrome (FMS) and sedentary controls. METHODS: Thirteen female FMS patients and 13 female sedentary controls underwent a standardized clinical assessment (including dolorimeter measurements of the upper trapezius and tibialis anterior muscles) and a standardized aerobic fitness test including measurement of maximum oxygen uptake (VO2max). Phosphorus (31P) magnetic resonance spectroscopy studies of the upper trapezius and tibialis anterior muscles were then performed in FMS patients and controls, at rest and during and following a muscle-fatiguing exercise protocol. RESULTS: FMS patients and controls had similar levels of VO2max and of maximum voluntary contraction (MVC) of the upper trapezius and tibialis anterior muscles. After controlling for VO2max and MVC, measurements of phosphocreatine (PCr), inorganic phosphate (P(i)), and intracellular pH in these muscles were not significantly different in FMS patients versus sedentary controls either at rest, during exercise, or during recovery. In the patients with FMS, no correlation was found between overall or local pain severity and the principal muscle metabolic parameter, PCr/P(i). Inverse correlations between dolorimeter scores at 2 muscle sites and tibialis anterior PCr/P(i) were found both in patients and in controls. CONCLUSION: This study demonstrates that under the conditions studied, muscle energy metabolism in FMS is no different than that in sedentary controls. These findings do not support the hypothesis that detectable defects in muscle energy metabolism occur in FMS.

Combined use of surface electromyography and 31P-NMR spectroscopy for the study of muscle disorders.

This article describes the use of combining spectral electromyographic signal techniques with phosphorus magnetic resonance (31P-NMR) spectroscopy for the purpose of studying muscle disorders. The quantification of muscle fatigue by electromyographic spectral variables such as the median frequency is summarized. Its development as a laboratory and clinical tool is presented, with an emphasis toward its potential as an assessment procedure. Similarly, the use of 31P-NMR spectroscopy for noninvasive measurement of phosphate metabolites and intracellular pH during fatigue are described. The limitations of this procedure are presented and compared with surface electromyographic techniques. Suggestions are made for combining these techniques for the purpose of monitoring muscle metabolic and electrophysiologic changes in situ during fatiguing exercises. A recent study in which these techniques were combined to evaluate the underlying mechanisms of fatigue in patients with fibromyalgia is described.