Novel combinatory method for surface and crystallinity analysis of crystalline materials: Combinatory analysis method for crystalline materials surface.

This work is dedicated to developing a method of combined surface morphology- and crystallographic analysis for crystalline silicon. To demonstrate the applicability of the method, a series of chemical operations, such as polishing and texturing, were applied to multi-crystalline silicon samples. The samples were pre- and post-analysed with WLI and Laue techniques, and the experimental data allowed construction of maps for crystal orientation to etching rate dependency. The study illustrates the strengths of the combinatory technique as an alternative to existing techniques such as atom force microscopy (AFM) and electron backscatter diffraction (EBSD).•Combination of LAUE tool and white light interferometry techniques.•Alternative time-effective method to EBSD.•Analysis of surface morphology and crystallographic properties for chemical processing.

Valence charge distribution in homogenous silicon-aluminium thin-films.

Homogenous aSi1-x Al x H y alloyed thin films, made by magnetron sputtering, has been found to exhibit tunable band gap and dielectric constant depending on their composition. The optical properties of alloys are largely defined by their electronic structure, which is is strongly influenced by interatomic charge transfer. In this work we have quantified interatomic charge transfer between Si, Al and H in aSi1-x Al x H y thin-films, with [Formula: see text] and [Formula: see text]. Charge transfer was found experimentally using x-ray photoelectron spectroscopy, by incorporating Auger parameter data into the Thomas and Weightman model. Both the perfect and imperfect screening models were tested, and the results were compared to models calculated using density functional theory based molecular dynamics. Using imperfect screening properties of Si and Al resulted in an excellent agreement between the experimental and computational results. Alloying aSi with Al is associated with donation of electrons from Al to Si for y = 0. For y > 0 electrons are transferred away from both Al and Si. The change in Si valence charge increases linearly with increasing band gap and decreasing dielectric constant. These relationships can be used as a quick guide for the evaluation of the Si valence charge and subsequently optoelectronic properties, at specific Al/Si ratios.

Printed organic conductive polymers thermocouples in textile and smart clothing applications.

This work reports on an experimental investigation of the potential of using selected commercially available organic conductive polymers as active ingredients in thermocouples printed on textiles. Poly(3, 4-ethylenedioxythiophene): poly(4 styrenesulfonate) (PEDOT:PSS) and polyaniline (PANI) were screen printed onto woven cotton textile. The influence of multiple thermocycles between 235 K (-38 °C) and 350 K (+77 °C) on resistivity and thermoelectric properties was examined. The Seebeck coefficients of PEDOT:PSS and PANI were found to be about +18 µV/K and +15 uV/K, respectively, when "metal-polymer" thermocouples were realized by combining the polymer with copper. When "polymer-polymer" thermocouples were formed by combining PEDOT:PSS and PANI, a thermoelectric voltage of about +10 µV/K was observed. A challenge recognized in the experiments is that the generated voltage exhibited drift and fluctuations.

Optimizing the performance of phase-change materials in personal protective clothing systems.

Phase-change materials (PCM) can be used to reduce thermal stress and improve thermal comfort for workers wearing protective clothing. The aim of this study was to investigate the effect of PCM in protective clothing used in simulated work situations. We hypothesized that it would be possible to optimize cooling performance with a design that focuses on careful positioning of PCM, minimizing total insulation and facilitating moisture transport. Thermal stress and thermal comfort were estimated through measurement of body heat production, body temperatures, sweat production, relative humidity in clothing and subjective ratings of thermal comfort, thermal sensitivity and perception of wetness. Experiments were carried out using 2 types of PCM, the crystalline dehydrate of sodium sulphate and microcapsules in fabrics. The results of 1 field and 2 laboratory experimental series were conclusive in that reduced thermal stress and improved thermal comfort were related to the amount and distribution of PCM, reduced sweat production and adequate transport of moisture.

Measurement of dye diffusion in scattering tissue phantoms using dual-wavelength low-coherence interferometry.

We demonstrate low-coherence interferometry (LCI) for dye diffusion measurements in scattering tissue phantoms. The diffusion coefficient of a phthalocyanine dye in 1.5% agar gel containing scattering Intralipid was measured using a dual-wavelength interfero-meter. One wavelength was matched to the absorption peak of the dye at 675 nm. The other, 805 nm, was not affected by the dye, and was used to correct for varying sample scattering as a function of depth, assuming a constant ratio between scattering at the two wavelengths. The same wavelength dependence of scattering is assumed for the entire sample, but no a priori knowledge about the amount of scattering is needed. The dye diffusion coefficient was estimated by fitting a mathematical model of the interferometer signal to the measured LCI envelope. We compare results obtained using both a constant-scattering and a depth-resolved-scattering approach to determine the sample scattering. The presented method provides robust estimation of the diffusion coefficient when spatial resolution in determining the depth-resolved scattering is varied. Results indicate that the method is valid for samples having continuous spatial variations in the scattering coefficient over lengths as short as the coherence length of the probing light. The method allows in situ characterization of diffusion in scattering media.

Functional imaging of dye concentration in tissue phantoms by spectroscopic optical coherence tomography.

We present functional imaging of the concentration of a photodynamic therapy (PDT)-related dye in scattering tissue phantoms based on spatially resolved measurements of optical properties through spectroscopic optical coherence tomography (OCT). Expressions for the OCT signal are developed, enabling estimation of depth-resolved sample optical properties. Based on these expressions, we discuss speckle statistics and speckle correlations of the OCT signal. Speckle noise reduction is performed by spatial filtering and is used to improve accuracy in the estimated optical properties at the expense of spatial resolution. An analytic expression for the precision in the estimated optical properties is derived. This expression shows that axial filtering, and thereby a reduction of axial resolution, gives a larger improvement in precision compared to the same filtering and reduction in the transversal resolution. It also shows that imaging with a shorter coherence length, or a larger numerical aperture, improves precision when the filter length determines the spatial resolution. Good agreement is obtained between experimentally determined and theoretically predicted variance in the estimated attenuation coefficients and dye concentration. Finally, we present guidelines for spectroscopic OCT systems for concentration imaging and discuss application of the method to more realistic phantoms and tissue.

Measurement of dye diffusion in agar gel by use of low-coherence interferometry.

We demonstrate low-coherence interferometry for diffusion measurements. We have measured the diffusion coefficient of a phthalocyanine dye in 1.5% agar gel with a two-wavelength interferometer; one wavelength was matched to the absorption peak of the dye at 675 nm, while the other, 805 nm, was not affected by the dye. The diffusion coefficient of the dye was found by fitting a mathematical model for the interferometer signal to the measured low-coherence interferometry amplitude. A 95% confidence interval for the diffusion coefficient was found to be D = (2.5 +/- 0.2) x 10(-10) m2/s. The influence of speckle averaging and experiment time on the determination of the diffusion coefficient has been studied. The presented technique allows in situ characterization of diffusion in semitransparent media.