PVA-assisted CNCs/SiO2 composite aerogel for efficient sorption of ciprofloxacin.

Efforts to develop a green, inexpensive and effective adsorbent are crucial for eliminating antibiotics in polluted water. The sorption capacity of the as-prepared polyvinyl alcohol (PVA)-assisted cellulose nanocrystals/SiO2 (CNCs/SiO2) composite aerogel to ciprofloxacin (CIP) rises with the increase of temperature and initial concentration. Reverse trend of sorption capacity can be found when increasing the adsorbent dosage of adsorbent. The optimal pH value for the sorption is proved to be 4. It's found in the uniaxial compression test that the maximum load that PVA-assisted aerogels can withstand is nearly 100 times than that of non-PVA aerogels. Sorption results confirm that the Pseudo-second order (R2 = 0.9885) and Langmuir models (R2 = 0.9959) fit well to sorption kinetics and equilibrium data, respectively. The rate constant differs from the initial concentration of CIP according to the Pseudo-second order model. The composite aerogel sorption capacity of Langmuir (qmax) for CIP was 163.34 mg·g-1. The thermodynamic studies showed that the sorption process is endothermic with the value of enthalpy change of 41.032 kJ/mol. Hydrogen bonding, π-π interaction, hydrophobic and electrostatic interactions are the dominant mechanisms of CIP sorption by the PVA-assisted CNCs/SiO2 composite aerogel.

Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture.

Activated carbons (AC) were prepared by carbonization and KOH activation using rice husk as feedstock. The effects of impregnation ratios and activation temperatures on the properties of AC were investigated. Under optimum conditions, BET surface area, total pore volume and micropore volume of AC are as high as 1495.52 m2/g, 0.786 cm3/g and 0.447 cm3/g, respectively. Surface modification with chitosan as nitrogen source was performed simultaneously during KOH activation process. XPS and FT-IR analyses show that N-species was successfully incorporate into AC. Compared with AC-5 (general AC), CAC-5 (modified AC) exhibits better CO2 adsorption performance, reaching 5.83 mmol/g at 273 K and 1 bar, which can be attributed to the formation of the CO2-philic active sites on AC surface by N-species. The linear correlations between CO2 uptake, micropore volume within specific size section and N-content was investigated. The isosteric heat of CO2 adsorption for CAC-5 (average 30.21 kJ/mol) is much higher than that of AC-5 (average 14.48 kJ/mol). The adsorption behavior of CAC-5 can be well described by Freundlich model. The high IAST selectivity factor for N-doped ACs indicates their excellent adsorption selectivity for CO2 over N2. Both physisorption and chemisorption are present in CO2 adsorption process of N-doped ACs.

Insight to hydrophobic SiO2 encapsulated SiO2 gel: Preparation and application in fire extinguishing.

Micron-sized hydrophobic SiO2 encapsulated SiO2 gel (HSESG) was prepared successfully by using SiO2 gel as the solid core and hydrophobic nano-SiO2 particle as the shell under high-speed shear stirring. The flowability, stability, particle size distribution, bulk density and water repellency of the powder were measured separately, and it was concluded that this type of product can exhibit smaller static angle, larger flow rate and lower bulk density. After the formation of a stable spatial network of SiO2 gel in its interior, relevant fire extinguishing experiments were carried out and HSESG exhibits higher efficiency in suppressing wood stack fires than that of ordinary dry water (DW) and ABC dry powder. As a high-efficiency fire-extinguishing material, it also exhibits excellent environmental friendliness and non-toxicity, which will make it have the potential to develop a new application market.