Longitudinal changes in patient-reported outcome measures following total hip arthroplasty and predictors of deterioration during follow-up: a seven-year prospective international multicentre study.

AIMS: The primary aim of this study was to quantify the improvement in patient-reported outcome measures (PROMs) following total hip arthroplasty (THA), as well as the extent of any deterioration through the seven-year follow-up. The secondary aim was to identify predictors of PROM improvement and deterioration. PATIENTS AND METHODS: A total of 976 patients were enrolled into a prospective, international, multicentre study. Patients completed a battery of PROMs prior to THA, at three months post-THA, and at one, three, five, and seven-years post-THA. The Harris Hip Score (HHS), the 36-Item Short-Form Health Survey (SF-36) Physical Component Summary (PCS), the SF-36 Mental Component Summary (MCS), and the EuroQol five-dimension three-level (EQ-5D) index were the primary outcomes. Longitudinal changes in each PROM were investigated by piece-wise linear mixed effects models. Clinically significant deterioration was defined for each patient as a decrease of one half of a standard deviation (group baseline). RESULTS: Improvements were noted in each PROM between the preoperative and one-year visits, with one-year values exceeding age-matched population norms. Patients with difficulty in self-care experienced less improvement in HHS (odds ratio (OR) 2.2; p = 0.003). Those with anxiety/depression experienced less improvement in PCS (OR -3.3; p = 0.002) and EQ-5D (OR -0.07; p = 0.005). Between one and seven years, obesity was associated with deterioration in HHS (1.5 points/year; p = 0.006), PCS (0.8 points/year; p < 0.001), and EQ-5D (0.02 points/year; p < 0.001). Preoperative difficulty in self-care was associated with deterioration in HHS (2.2 points/year; p < 0.001). Preoperative pain from other joints was associated with deterioration in MCS (0.8 points/year; p < 0.001). All aforementioned factors were associated with clinically significant deterioration in PROMs (p < 0.035), except anxiety/depression with regard to PCS (p = 0.060). CONCLUSION: The present study finds that patient factors affect the improvement and deterioration in PROMs over the medium term following THA. Special attention should be given to patients with risk factors for decreased PROMs, both preoperatively and during follow-up. Cite this article: Bone Joint J 2019;101-B:768-778.

A Fully Functional Drug-Eluting Joint Implant.

Despite advances in orthopedic materials, the development of drug-eluting bone and joint implants that can sustain the delivery of the drug and maintain the necessary mechanical strength in order to withstand loading has remained elusive. Here, we demonstrate that modifying the eccentricity of drug clusters and the percolation threshold in ultrahigh molecular weight polyethylene (UHMWPE) results in maximized drug elution and in the retention of mechanical strength. The optimized UHMWPE eluted antibiotic at a higher concentration for longer than the clinical gold standard antibiotic-eluting bone cement while retaining the mechanical and wear properties of clinically used UHMWPE joint prostheses. Treatment of lapine knees infected with Staphylococcus aureus with the antibiotic-eluting UHMWPE led to complete bacterial eradication and to the absence of detectable systemic effects. We argue that the antibiotic-eluting UHMWPE joint implant is a promising candidate for clinical trials.

Side-to-side variation in normal femoral morphology: 3D CT analysis of 122 femurs.

BACKGROUND: The contralateral femur is often used as reference for reconstruction in unilateral hip joint pathology. The objective of this study was to quantify the side-to-side variation in proximal femur. We hypothesized that significant side-to-side differences exist between left and right femur with implications for preoperative planning and leg length discrepancy following hip arthroplasty. MATERIALS AND METHODS: CT-based 3D femoral models were reconstructed for 122 paired femurs in 61 young healthy subjects (46.9±6.8 years) with no history of hip pathology. Side-to-side differences of several femoral morphologic parameters, including femoral head diameter, femoral anteversion, horizontal offset and femoral head center location, were compared and correlated with demographic factors using multiple linear regression. RESULTS: Significant side-to-side differences (P<0.01) were found in femoral anteversion (4.3±3.8°; range: 0.2° to 17.3°), horizontal offset (2.5±2.1mm; range: 0.1 to 10.3mm), and femoral head center location (7.1±3.8mm; range: 0.5 to 19.4mm). The difference in femoral anteversion was strongly correlated with the difference in neck diameter (R(2)=0.79), whereas the difference in horizontal femoral offset was highly correlated with the head diameter difference (R(2)=0.72). Femoral head center difference was correlated with the femoral anteversion, horizontal offset and neck-shaft-angle difference (R(2)=0.82). DISCUSSION: Relying on the anatomic landmarks of the contralateral femur during hip arthroplasty may not necessarily result in restoration of native anatomy and leg-length. Knowledge of the baseline side-to-side asymmetry could provide a range of error that would be tolerable following hip reconstruction. LEVEL OF EVIDENCE: Level IV. TYPE OF STUDY: Retrospective observational study.

In-vivo time-dependent articular cartilage contact behavior of the tibiofemoral joint.

OBJECTIVE: The purpose of this study was to investigate the in-vivo time-dependent contact behavior of tibiofemoral cartilage of human subjects during the first 300 s after applying a constant full body weight loading and determine whether there are differences in cartilage contact responses between the medial and lateral compartments. DESIGN: Six healthy knees were investigated in this study. Each knee joint was subjected to full body weight loading and the in-vivo positions of the knee were captured by two orthogonal fluoroscopes during the first 300 s after applying the load. Three-dimensional models of the knee were created from MR images and used to reproduce the in-vivo knee positions recorded by the fluoroscopes. The time-dependent contact behavior of the cartilage was represented using the peak cartilage contact deformation and the cartilage contact area as functions of time under the constant full body weight. RESULTS: Both medial and lateral compartments showed a rapid increase in contact deformation and contact area during the first 20s of loading. After 50s of loading, the peak contact deformation values were 10.5+/-0.8% (medial) and 12.6+/-3.4% (lateral), and the contact areas were 223.9+/-14.8 mm(2) (medial) and 123.0+/-22.8 mm(2) (lateral). Thereafter, the peak cartilage contact deformation and contact area remained relatively constant. The respective changing rates of cartilage contact deformation were 1.4+/-0.9%/s (medial) and 3.1+/-2.5%/s (lateral); and of contact areas were 40.6+/-20.8 mm(2)/s (medial) and 24.0+/-11.4 mm(2)/s (lateral), at the first second of loading. Beyond 50 s, both changing rates approached zero. CONCLUSIONS: The peak cartilage contact deformation increased rapidly within the first 20s of loading and remained relatively constant after approximately 50 s of loading. The time-dependent response of cartilage contact behavior under constant full body weight loading was significantly different in the medial and lateral tibiofemoral compartments, with greater peak cartilage contact deformation on the lateral side and greater contact area on the medial side. These data can provide insight into normal in-vivo cartilage function and provide guidelines for the improvement of ex-vivo cartilage experiments and the validation of computational models that simulate human knee joint contact.

In vivo cartilage contact deformation in the healthy human tibiofemoral joint.

OBJECTIVES: In vivo cartilage contact deformation is instrumental for understanding human joint function and degeneration. This study measured the total deformation of contacting articular cartilage in the human tibiofemoral joint during in vivo weight-bearing flexion. METHODS: Eleven healthy knees were magnetic resonance (MR) scanned and imaged with a dual fluoroscopic system while the subject performed a weight-bearing single-leg lunge. The tibia, femur and associated articulating cartilage were constructed from the MR images and combined with the dual fluoroscopic images to determine in vivo cartilage contact deformation from full extension to 120 degrees of flexion. RESULTS: In both compartments, minimum peak compartmental contact deformation occurred at 30 degrees of flexion (24 +/- 6% medial, 17 +/- 7% lateral) and maximum peak compartmental deformation occurred at 120 degrees of flexion (30 +/- 13% medial, 30 +/- 10% lateral) during the weight-bearing flexion from full extension to 120 degrees. Average medial contact areas and peak contact deformations were significantly greater than lateral compartment values (P < 0.05). In addition, cartilage thickness in regions of contact was on average 1.4- and 1.1-times thicker than the average thickness of the tibial and femoral cartilage surfaces, respectively (P < 0.05). CONCLUSIONS: These data may provide base-line knowledge for investigating the effects of various knee injuries on joint contact biomechanics and the aetiology of cartilage degeneration.

Determination of in-vivo articular cartilage contact areas of human talocrural joint under weightbearing conditions.

OBJECTIVE: The knowledge of in-vivo cartilage contact biomechanics is important to the understanding of the pathogenesis of joint diseases such as osteoarthritis. This study investigated the in-vivo contact areas of human talocrural joint under weightbearing conditions that simulated the stance phase of walking using a combined magnetic resonance (MR) and dual-orthogonal fluoroscopic imaging technique. DESIGN: Nine healthy ankles of living subjects were recruited for this study. The in-vivo talocrural joint positions were recorded using the dual-orthogonal fluoroscopic images at three ankle positions that simulated those occurring during the stance phase of walking: heel strike, mid-stance, and toe off. Three-dimensional (3D) models of the talocrural joints were created from MR images and used to reproduce the in-vivo ankle positions recorded on the fluoroscopic images. The talocrural cartilage contact area was defined as the overlap area of the distal tibial and the proximal talar cartilage surfaces. The method was validated using an in-vitro experimental setup to evaluate its accuracy in determination of cartilage contact area. RESULTS: The validation study demonstrated that the articular cartilage contact area of the talocrural joint determined using the imaging technique was approximately 4% lower than that of the experimental measurement. In the nine living ankles, the average cartilage coverage area was 964.9+/-156.1 mm(2) on the distal tibia and 1304.8+/-208.4 mm(2) on the proximal talus. The average talocrural cartilage contact areas were 272.7+/-61.1 mm(2) at heel strike, 416.8+/-51.7 mm(2) at mid-stance, and 335.7+/-64.5 mm(2) at toe off. The contact area at mid-stance was significantly larger than those at heel strike and toe off, while the contact area at toe off was significantly larger than that at heel strike. CONCLUSION: The combined dual fluoroscopic and MR imaging technique was shown to be capable of determining in-vivo talocrural cartilage contact areas. During the simulated stance phase of walking, the contact areas were less than 44% and 31% of the cartilage coverage areas of the distal tibia and the proximal talus, respectively. These data may be useful for understanding in-vivo biomechanical function of the cartilage as well as the etiology of osteoarthritis.

Sensitivity of the knee joint kinematics calculation to selection of flexion axes.

Various flexion axes have been used in the literature to describe knee joint kinematics. This study measured the passive knee kinematics of six cadaveric human knee specimens using two widely accepted flexion axes; transepicondylar axis and the geometric center axis. These two axes were found to form an angle of 4.0 degrees +/- 0.8 degrees. The tibial rotation calculated using the transepicondylar axis was significantly different than the rotation obtained using the geometric center axis for the same knee motion. At 90 degrees of flexion, the tibial rotation obtained using the transepicondylar axis was 4.8 degrees +/- 9.4 degrees whereas the rotation recorded using the geometric center axis at the same flexion angle was 13.8 degrees +/- 10.2 degrees. At 150 degrees of knee flexion, the rotations obtained from the transepicondylar and the geometric center axes were 7.2 degrees +/- 5.7 degrees and 19.9 degrees +/- 6.9 degrees, respectively. The data suggest that a clear definition of the flexion axis is necessary when reporting knee joint kinematics.

Effect of the posterior cruciate ligament on posterior stability of the knee in high flexion.

Most biomechanical studies of the knee have focused on knee flexion angles between 0 degrees and 120 degrees. The posterior cruciate ligament (PCL) has been shown to constrain posterior laxity of the knee in this range of flexion. However, little is known about PCL function in higher flexion angles (greater than 120 degrees ). This in vitro study examined knee kinematics before and after cutting the PCL at high flexion under a posterior tibial load and various muscle loads. The results demonstrated that although the PCL plays an important role in constraining posterior tibial translation at low flexion angles, the PCL had little effect in constraining tibial translation at 150 degrees of flexion under the applied loads.

An electronic database for outcome studies that includes digital radiographs.

We report on acquisition of key data from the clinical medical record, surgical data, radiologic studies, and patient surveys for a novel digital total hip arthroplasty (THA) registry that includes electronic capture of digital radiographic images into a database on an internet platform for query. We now have the ability to collect demographic and operative data, including the operative note, discharge summary, surgery data, and Digital Imaging Communications in Medicine (DICOM) radiology images. Steps are being completed to assemble office encounters, hospital procedural codes, and implant bar codes. Two examples include a THA surgery record and a THA outcome study with plain radiograph set. Analysis of such data could suggest ways to improve clinical practice.

Biochemical analyses of human macrophages activated by polyethylene particles retrieved from interface membranes after failed total hip arthroplasty.

Human monocyte/macrophages (M/M) were exposed to retrieved ultra-high molecular weight polyethylene (UHMWPE) particles isolated after enzymatic digestion of revision total hip arthroplasty interface membrane tissue samples. The cellular response of human M/M to UHMWPE was compared with the response of these cells to latex particles and culture medium alone. We incubated macrophages in good contact with polyethylene particles using an inverted culture system. Chamber slides on which macrophages were attached were filled with polyethylene particle suspension and sealed with plastic sheets. After the slides were inverted, the incubation was completed. Retrieved UHMWPE particulate debris stimulated human M/M to secrete interleukin (IL)-1beta, IL-6, and tumor necrosis factor (TNF)-alpha. Human M/M exposed to retrieved UHMWPE particles secreted significantly more IL-1beta, IL-6, and TNF-alpha compared with M/M exposed to latex particles (P<.05).

Cruciate-retaining and cruciate-substituting total knee arthroplasty: an in vitro comparison of the kinematics under muscle loads.

The kinematics of posterior cruciate ligament (PCL)-retaining (PCR) and PCL-substituting (PS) total knee arthroplasty (TKA) were compared directly in a robotic, in vitro study, and the forces in the PCL and cam-spine mechanism were measured from 0 degrees to 120 degrees of flexion. The forces in the PCL after PCR TKA and in cam-spine contact after PS TKA increased only at a flexion of > or =90 degrees. Posterior translation of the lateral femoral condyle was significantly greater than translation of the medial femoral condyle in the intact knees, consistent with femoral rollback and internal tibial rotation. The PCR and PS TKAs partially restored these kinematics when the knee flexed >60 degrees (ie, when the forces increased in the PCL and cam-spine mechanism), whereas the PCL-deficient TKA failed to do so. The results reflect the importance of the PCL and cam-spine mechanism after PCL retention and substitution in TKA and confirm the necessity for either one, if knee kinematics are to be restored even partially.

Optimizing femoral component rotation in total knee arthroplasty.

Femoral component rotation is important in total knee arthroplasty to optimize patellofemoral and tibiofemoral kinematics. More recently, the epicondylar axis has been cited as the definitive landmark for femoral component rotation. However, there are few studies to support the validity of this rotational landmark and its effect on the patellofemoral and tibiofemoral articulations. In the current study, a total knee arthroplasty was done in 11 knees from cadavers. The knees were tested with various femoral component rotations from 5 degrees internal rotation to 5 degrees external rotation referenced to the epicondylar axis and to the posterior femoral condyles. Each knee acted as its own internal control. The knees were actively ranged from 0 degrees to 100 degrees by a force on the quadriceps tendon in an Oxford knee simulator. Three-dimensional kinematics of all three components were measured whereas a multiaxial transducer imbedded in the patella measured patellofemoral forces. Femoral component rotation parallel to the epicondylar axis resulted in the most normal patellar tracking and minimized patellofemoral shear forces early in flexion. This optimal rotation also minimized tibiofemoral wear motions. These beneficial effects of femoral rotation were less reproducibly related to the posterior condyles. Rotating the femoral component either internal or external to the epicondylar axis worsened knee function by increasing tibiofemoral wear motion and significantly worsening patellar tracking with increased shear forces early in flexion. Based on the current study, the femoral component should be rotationally aligned parallel to the epicondylar axis to avoid patellofemoral and tibiofemoral complications.

Rotational instability and malrotation after total knee arthroplasty.

Total knee arthroplasty has become the standard treatment for various disabling disorders of the knee and has proven long-term success. Surgical technique and prosthetic design have evolved to produce consistent and excellent results. Despite the current success of total knee arthroplasty, complications remain.

Variability of a three-dimensional finite element model constructed using magnetic resonance images of a knee for joint contact stress analysis.

Magnetic resonance (MR) imaging has been widely used to evaluate the thickness and volume of articular cartilage both in vivo and in vitro. While morphological information on the cartilage can be obtained using MR images, image processing for extracting geometric boundaries of the cartilage may introduce variations in the thickness of the cartilage. To evaluate the variability of using MR images to construct finite element (FE) knee cartilage models, five investigators independently digitized the same set of MR images of a human knee. The topology of cartilage thickness was determined using a minimal distance algorithm. Less than 8 percent variation in cartilage thickness was observed from the digitized data. The effect of changes in cartilage thickness on contact stress analysis was then investigated using five FE models of the knee. One FE model (average FE model) was constructed using the mean values of the digitized contours of the cartilage, and the other four were constructed by varying the thickness of the average FE model by +/- 5 percent and +/- 10 percent, respectively. The results demonstrated that under axial tibial compressive loading (up to 1,400 N), variations of cartilage thickness caused by digitization of MR images may result in a difference of approximately 10 percent in peak contact stresses (surface pressure, von Mises stress, and hydrostatic pressure) in the cartilage. A reduction of cartilage thickness caused increases of contact stresses, while an increase of cartilage thickness reduced contact stresses. Furthermore, the effect of variation of material properties of the cartilage on contact stress analysis was investigated. The peak contact stress increased almost linearly with the Young's modulus of the cartilage. The peak von Mises stress was dramatically reduced when the Poisson,s ratio was increased from 0.05 to 0.49 under an axial compressive load of 1,400 N, while peak hydrostatic pressure was dramatically increased. Peak surface pressure was also increased with the Poisson's ratio, but with a lower magnitude compared to von Mises stress and hydrostatic pressure. In conclusion, the imaging process may cause 10 percent variations in peak contact stress, and the predicted stress distribution is sensitive to the accuracy of the material properties of the cartilage model, especially to the variation of Poisson's ratio.

The effect of component placement on knee kinetics after arthroplasty with an unconstrained prosthesis.

The mechanical success of a total knee replacement demands stable patellar tracking without subluxation and, stable tracking, in turn, can depend largely on the medial-lateral forces restraining the patella. Patellar button medialization has been advocated as a means of reducing subluxation, and experimental evidence has shown femoral component rotation also affects medial-lateral forces. Surgeons have choices in femoral component rotation and patellar button medialization and must frequently make intra-operative decisions concerning component placement because of anatomical variations among patients. Thus, in seeking to minimize medial-lateral patellar force, we examined the effects of patellar button medialization and external femoral component rotation. The study used an unconstrained total knee system implanted in nine cadaveric specimens tested on a knee simulator operating through flexion angles up to 100 degrees. Tests included all combinations of external femoral component rotation of 0 degree, 2.5 degrees, and 5 degrees and patellar placement at the geometric center and at 3.75 mm medial to the geometric center. A video-based motion analysis system tracked patellar and tibial kinematics while a six-component load cell measured patellofemoral loads. Repeated measures analysis of variance revealed a statistically significant decrease in the average medial-lateral force with button medialization but no significant change with femoral component rotation. Neither femoral component rotation nor patellar button medialization had an effect on the normal component of the patellar reaction force. External femoral component rotation did cause significant increases in lateral patellar tilt, in tibial varus angle, and in external tibial rotation. Button medialization caused significant increases in lateral patellar tracking, lateral patellar tilt and external tibial rotation. The results in medial-lateral patellar forces quantify the benefit of patellar button medialization and discount any benefit of femoral rotation. The change in tibial kinematics with patellar button medialization and femoral component rotation cannot be measured in vivo with current technology, and the precise clinical implications are unknown.

Classification of osteonecrosis of the femoral head. Reliability, reproducibility, and prognostic value.

The purpose of the current investigation was to determine interobserver and intraobserver reliability of the classification system of Steinberg et al for osteonecrosis of the femoral head. Sixty-five anteroposterior and lateral radiographs of hips were selected randomly from a pool of patients with confirmed osteonecrosis of the femoral head. Six fellowship-trained observers viewed the radiographs (Reading 1). The observers used six main stages of the classification excluding A, B, and C subgroups. The same observers viewed the radiographs 4 months later in reverse order (Reading 2). Reading 1 was used to calculate interobserver kappa values. Reading 2 was used to calculate intraobserver kappa values. Stage-specific kappa values for interobserver variation between all viewers were as follows: Stage I, k = 0.64; Stage II, k = 0.51; Stage III, k = 0.21; Stage IV, k = 0.49; Stage V, k = 0.36; and Stage VI, k = 0.80. Stage-specific kappa values for intraobserver variation between all viewers were as follows: Stage I, k = 0.74; Stage II, k = 0.60; Stage III, k = 0.46; Stage IV, k = 0.59; Stage V, k = 0.27; and Stage VI, k = 0.78. An average of 10 of 21 (48%) of these errors involved Stage III. An average of 6.3 of 21 (30%) intraobserver errors involved Stage V. The presence of the crescent sign in Stage III and joint space narrowing in Stage V markedly diminished the overall reliability of any four- to six-stage classification system. Based on the authors' experience and analysis of the current classifications of osteonecrosis of the femoral head, an easy and reproducible Pittsburgh classification system is proposed.

Surgical treatment of pelvic osteolysis.

Sixty-eight well-fixed acetabular cups with osteolysis in the pelvis and polyethylene wear were identified from a series of 124 reoperations for failed cementless sockets. The well-fixed sockets requiring reoperation were subdivided based on whether the liner was exchanged and lytic lesion grafted (Type I case) or the socket was removed and a complete revision was done (Type II case). In 40 patients (Type I cases), the polyethylene liner was exchanged and the osteolytic lesions were debrided. Allograft bone chips were packed into the lytic defect in 29 patients. In the remaining 11 patients, the lesions were debrided but not grafted. At final followup, all of the acetabular components were radiographically stable. No new osteolytic lesions were identified. Approximately 1/3 of the lesions had resolved completely regardless of whether they were grafted. The remaining 2/3 had decreased in size. In 28 patients (Type II cases), the socket was revised. Both strategies were successful in arresting the process of osteolysis during the course of this study (mean, 3.5 years). However, removal of well-fixed sockets was associated with significantly more bone loss.

Revision total knee arthroplasty: current rationale and techniques for femoral component revision.

Revision total knee arthroplasty often requires solutions for the multiple complexities that exist on the femoral side, including the treatment of bone loss, component position, ligamentous laxity, and component stability. Surgical decisions regarding the proper use of bone grafts, component augmentation, proper axial and rotational alignment, and femoral stems must be addressed systematically to achieve consistently successful outcomes. A review of currently used femoral revision techniques and their rationale and a classification system of femoral deficiencies designed to guide the surgical decision making process are presented.

Quantitative analysis of ultrahigh molecular weight polyethylene (UHMWPE) wear debris associated with total knee replacements.

The size and morphology of particulate wear debris retrieved from tissues around 18 failed total knee replacements (TKR) were characterized. Interfacial membranes from nine cemented and nine uncemented TKR were harvested from below the tibial components during revision surgery. Wear debris were extracted using papain and potassium hydroxide digestion. Ultrahigh molecular weight polyethylene (UHMWPE) particles from around cemented or uncemented TKR were similar in size and morphology. The mean size was 1.7 +/- 0. 7 microm with a range of 0.1-18 microm. Thirty-six percent of the particles were less than 1 microm and 90% were less than 3 microm. Morphologically the particles were predominantly spherical with occasional fibrillar attachments and flakes. Particles from TKR were greater than threefold larger than previously characterized particles from total hip replacements, which were 0.5 microm in mean size. Differences in joint conformity and wear patterns between the hip and knee articulations may explain the disparity in size of the wear debris. Since particle size represents an important variable influencing the magnitude of the biological response, it is possible that in vivo the larger TKR debris results in a diminished mediator release, which in turn may account for the lower incidence of osteolysis and aseptic loosening in some designs of TKR.

Fixation, polyethylene wear, and pelvic osteolysis in primary total hip replacement.

A multicenter retrospective review was performed analyzing 1081 primary total hip replacements in 944 patients using the Harris Galante-I cementless acetabular component with screw fixation. All patients were followed up for a minimum of 5 years with a mean followup of 81 months. Linear polyethylene wear averaged 0.11 mm/year (range, 0-0.86 mm/year). Pelvic osteolysis was seen in 25 patients (2.3%). Migration of the acetabular component was seen in four hips. A subgroup of patients was reanalyzed at a minimum followup of 10 years. The mean linear polyethylene wear rate remained 0.11 mm/year. In this group, only one socket had migrated. There was an association between wear rate and age. On average, younger patients had higher wear rates. The risk for having pelvic osteolysis develop and the need for revision surgery also was age-related. Twenty-two percent of hip replacements (15 hips) in patients younger than 50 years of age at the time of their index operation had pelvic osteolysis develop. In contrast, for patients older than 50 years of age at the time of surgery only 7.8% (eight hips) had osteolysis of the pelvis develop. For patients older than 70 years of age at the time of primary total hip replacement, none had pelvic osteolysis develop.