Pseudo-fractional differential equations and generalized g-Laplace transform.

In this article, we introduce a generalized g-Laplace transform and discuss some essential results of integral transform theory, in particular, involving a ψ -Hilfer pseudo-fractional derivative and function convolution. In this sense, we investigated the existence and uniqueness of known solutions for a pseudo-fractional differential equation.

A 3-year longitudinal prospective study assessing microbial profile and clinical outcomes of single-unit cement-retained implant restorations: Zirconia versus titanium abutments.

PURPOSE: The aim of this study was to assess the microbiological and clinical outcomes of implant-supported restorations on zirconia or titanium abutments after 3 years in function. MATERIALS AND METHODS: Twenty two-part dental implants were placed in 20 healthy individuals in need of single-tooth replacement. Ceramic-based reconstructions were cemented in either zirconia or titanium abutments. Clinical, radiographic, and microbiological outcomes were examined at implant loading and then yearly up to 3 years post-loading. RESULTS: Cumulative survival/success implant rates were 95% after 3 years. Mean total marginal bone loss was 0.76 ± 0.21 mm for zirconia and 0.99 ± 0.41 mm for titanium, with no significant differences (P > .05). Overall, titanium and zirconia abutments presented similar values of probing depth, gingival recession, and bleeding on probing over time (P < .05). Microbial profile of implants restored with titanium or zirconia is quite similar to that found in the remaining teeth. CONCLUSIONS: Zirconia and titanium presented different microbial profile and genome counts. Clinical findings for both zirconia and titanium abutments were similar and consistent with a healthy condition, reflecting a high survival rate and low bone loss. Microbiota did not impact the clinical outcomes after 3 years of function.

Oral Biofilm Formation on Different Materials for Dental Implants.

Dental implants and their prosthetic components are prone to bacterial colonization and biofilm formation. The use of materials that provides low microbial adhesion may reduce the prevalence and progression of peri-implant diseases. In view of the oral environment complexity and oral biofilm heterogeneity, microscopy techniques are needed that can enable a biofilm analysis of the surfaces of teeth and dental materials. This article describes a series of protocols implemented for comparing oral biofilm formation on titanium and ceramic materials for prosthetic abutments, as well as the methods involved in oral biofilms analyses at the morphological and cellular levels. The in situ model to evaluate oral biofilm formation on titanium and zirconia materials for dental prosthesis abutments as described in this study provides a satisfactory preservation of the 48 h biofilm, thereby demonstrating methodological adequacy. Multiphoton microscopy allows the analysis of an area representative of the biofilm formed on the test materials. In addition, the use of fluorophores and the processing of the images using multiphoton microscopy allows the analysis of the bacterial viability in a very heterogeneous population of microorganisms. The preparation of biological specimens for electron microscopy promotes the structural preservation of biofilm, images with good resolution, and no artifacts.

A Qualitative Study on Patients' Perceptions of Two Types of Attachments for Implant Overdentures.

The aim of this qualitative study was to gain a deeper understanding of patient perceptions of wearing implant-retained overdentures with ball-shaped or cylindrical attachment systems. Twenty-two wearers of implant-supported overdentures participated in this qualitative study based on a randomized crossover clinical trial that aimed to compare a cylindrical attachment and a ball attachment. In phase I of the study, group A experienced ball attachments (n = 11) and group B Locator attachments (n = 11) for 1 year. Afterward, in phase II, the attachments were changed; group A received Locator attachments and group B received ball attachments. One week after the attachment's replacement, semistructured individual interviews were conducted. All interviews were audiotaped and transcribed. The analysis was guided by thematic content analysis. Most of the patients from both groups preferred the attachment they received in phase II, regardless the type. A major theme raised by the participants to justify their preference between the attachment types was prosthesis retention/stability, sometimes considered as a positive and other times as a negative factor. Other themes were also explored: oral function, pain, hygiene, previous experiences, confidence on the dentist's work, and esthetic. Aspects related to the retention/stability of the overdentures are the main concerns associated with the perceptions of most patients treated with implant overdentures regardless of the type of attachment. Adequate retention level should be identified and adjusted on an individual basis and maintained overtime as possible. Therefore, follow-up appointments should be planned for readjustment of the attachment's retention. Overretention should be avoided.

Osseointegration of standard and mini dental implants: a histomorphometric comparison.

BACKGROUND: Mini dental implants (MDIs) are becoming increasingly popular for rehabilitation of edentulous patients because of their several advantages. However, there is a lack of evidence on the osseointegration potential of the MDIs. The objective of the study was to histomorphometrically evaluate and compare bone apposition on the surface of MDIs and standard implants in a rabbit model. METHODS: Nine New Zealand white rabbits were used for the study to meet statistical criteria for adequate power. Total 18 3M™ESPE™ MDIs and 18 standard implants (Ankylos® Friadent, Dentsply) were inserted randomly into the tibia of rabbits (four implants per rabbit); animals were sacrificed after a 6-week healing period. The specimens were retrieved en bloc and preserved in 10% formaldehyde solution. Specimens were prepared for embedding in a light cure acrylic resin (Technovit 9100). The most central sagittal histological sections (30-40 µm thick) were obtained using a Leica SP 1600 saw microtome. After staining, the Leica DM2000 microscope was used, the images were captured using Olympus DP72 camera and associated software. Bone implant contact (BIC) was measured using Infinity Analyze software. RESULTS: All implants were osseointegrated. Histologic measures show mineralized bone matrix in intimate contact with the implant surface in both groups. The median BIC was 57.5% (IQR 9.0) in the MDI group and 55.0% (IQR 4.5) in the control group (P > 0.05, Mann-Whitney test). There were no statistical differences in osseointegration at 6 weeks between MDIs and standard implants in rabbit tibias. CONCLUSIONS: Based on these results, it is concluded that osseointegration of MDIs is similar to that of standard implants.

Customized SmartPeg for measurement of resonance frequency of mini dental implants.

BACKGROUND: One-piece narrow diameter implants (NDIs) have been recommended as "Single-tooth replacements in the anterior zones, single posterior, multiple-unit fixed dental prosthesis (FDP), edentulous jaws to be rehabilitated with FDP, and edentulous jaws rehabilitation with overdentures in situations with reduced mesiodistal space or reduced ridge width." (ITI consensus 2013). Since NDIs can be immediately loaded, it is important to be able to carry out stability testing. We developed and validated a customized SmartPeg for this type of implant to measure the Implant Stability Quotient (ISQ). The ISQ of mini dental implants (MDIs) was measured and compared with the stability of standard and in a rabbit model. OBJECTIVE: The aim of the study is to test the feasibility of a customized SmartPeg for resonance frequency measurement of single-piece mini dental implants and to compare primary stability of a standard and the mini dental implant (3M™ESPE™ MDI) in a rabbit model after 6 weeks of healing. METHODS: Eight New Zealand white rabbits were used for the study. The protocol was approved by the McGill University Animal Ethics Review Board. Sixteen 3M™ESPE™ MDI and equal number of standard implants (Ankylos® Friadent, Dentsply) were inserted into the tibia/femur of the rabbits and compared. Each rabbit randomly received two 3M™ESPE™ MDI and two Ankylos® implants in each leg. ISQ values were measured with the help of an Osstell ISQ device using custom-made SmartPegs for the MDIs and implant-specific SmartPegs™ (Osstell) for the Ankylos®. Measurements were obtained both immediately following implant placement surgery and after a 6-week healing period. Each reading was taken thrice and their average compared using Wilcoxon matched pairs signed-rank tests. RESULTS: The median ISQ and interquartile range (IQR) values were 53.3 (8.3) at insertion and 60.5 (5.5) at 6 weeks for the 3M™ESPE™MDI and, respectively, 58.5 (4.75) and 65.5 (9.3) for the Ankylos® implant. These values also indicate that both types of implants achieved primary and secondary stability, and this is supported by histological data. ISQ values of both 3M™ESPE™ MDI and Ankylos® increased significantly from the time of insertion to 6 weeks post-insertion (p < 0.05). CONCLUSIONS: The new custom-made SmartPeg is suitable for measuring the Implant Stability Quotient of 3M™ESPE™MDIs. The primary stability of 3M™ESPE™MDIs is similar to the primary stability attained by standard implants in the rabbit tibia.

Identification of oral bacteria on titanium implant surfaces by 16S rDNA sequencing.

OBJECTIVE: To characterize the profile of microbial communities colonizing titanium implants with different surface treatments after exposure to the oral environment at the genus or higher taxonomic level. MATERIAL AND METHODS: Sixteen titanium disks, machined or sandblasted large-grit and acid-etched (SLA), were mounted on removable intraoral splints worn by four patients. After 24 h of intraoral exposure, biofilm samples were collected from disks and supra/subgingival teeth areas. The 16S rDNA genes from each sample were amplified, sequenced with the Miseq Illumina instrument and analyzed. RESULTS: A total of 29 genera and seven more inclusive taxa, representing the phyla Firmicutes, Proteobacteria, Fusobacteria, Bacteroidetes, Actinobacteria and candidate division TM7 were identified in both titanium surfaces and teeth. No differences were found in relation to the operational taxonomic units (OTUs) and microbial diversity, assessed by Chao 1 and Shannon indices, when comparing SLA and machined titanium surfaces. CONCLUSIONS: Machined and SLA surfaces are colonized by similar numbers of prokaryotic OTUs after 24 h of exposure to the oral environment. Higher complexity of the titanium surface topography in the initial phase of biofilm maturation does not seem to significantly influence the colonizing microbiota.

Profile of bacteria colonizing the exposed bone of patients with anti-osteoclastic drug-related osteonecrosis of the jaws.

Microbial etiology for anti-osteoclastic drug-related osteonecrosis of the jaw (ARONJ) was suggested. This study investigates any link between bacteria colonizing ARONJ sites and other oral cavity sites. Microbiota samples of 10 ARONJ patients were collected from the exposed bone, adjacent teeth, contralateral teeth, and tongue. DNA checkerboard hybridization was used for microbiota analysis with 43 genomic DNA probes prepared from human oral bacterial (38) and candida (5) species, using Socransky's bacterial complexes as a guide. The frequency and the mean proportion of each bacterial species were used. Eikenella corrodens, Streptococcus constellatus, and Fusobacterium nucleatum were dominant in the ARONJ sites and detected in most teeth samples. Staphylococcus aureus was also dominant in the ARONJ sites and tongue. Significant correlations were found between the mean proportions of bacterial species colonizing adjacent teeth, contralateral teeth, and tongue (p < 0.001, R(2) > 0.69). No significant correlation (p > 0.05, R(2) < 0.025) was found between bacteria colonizing ARONJ sites and other evaluated sites. Within the study limitations, it was concluded that the primary sources of microorganisms colonizing ARONJ sites could be other sites such as teeth and tongue. The microbial profile of the necrotic bone is predominantly colonized with bacteria from Socransky's green and orange complexes, as well as with species associated with bone infections.

Assessment of the Impact of Skeletonization on Pleuropulmonary Changes after Bilateral Internal Thoracic Artery Harvest for Coronary Artery Bypass Grafting.

BACKGROUND AND AIMS: Skeletonization has been proposed as a technique to minimize the risk of sternal devascularization during bilateral internal thoracic artery harvest for coronary artery bypass grafting. The impact of this strategy on late radiologic pleuropulmonary changes has not been addressed. MATERIAL AND METHODS: Post-operative chest radiographs from patients (n = 253 per group) undergoing bilateral internal thoracic artery harvest using skeletonized and non-skeletonized techniques were reviewed by blinded radiologists. The primary outcome was the incidence of atelectasis and pleural effusion. Multivariable linear regression models were derived to assess the relationship of radiologic pleuropulmonary outcomes to patients and operative variables. RESULTS AND CONCLUSION: Patients in the skeletonized group were older (p < 0.0001), had a lower preoperative hematocrit (p = 0.014), had higher prevalence of peripheral vascular disease (p = 0.001), were of female gender (p = 0.015), underwent off-pump surgery (p < 0.001), had urgent/emergent status (p = 0.024), and had chronic obstructive pulmonary disease (p = 0.019). There was no difference in the incidence of post-operative complications, ventilation time, or intensive care unit stay. There was no difference in the severity of post-operative atelectasis in both groups. More patients in the non-skeletonized group had a grade 2/3 left pleural effusion on the late post-operative chest X-ray (p = 0.007). The independent effect of skeletonization on the development of a late left pleural effusion was significant (odds ratio = 0.558, 95% confidence interval = 0.359-0.866, p = 0.009). Skeletonization results in a decreased incidence of late post-operative left pleural effusion with no difference in early or late atelectasis. Further studies are warranted to assess the mechanism of these pleuropulmonary changes and the impact of other factors such as pleural violation during surgery.

Electrochemical Treatment of Contaminated Titanium Surfaces in Vitro: An Approach for Implant Surface Decontamination.

Bacterial contamination on titanium implants can cause inflammation and eventually implant failure. Currently used methods for decontamination of implants have demonstrated limited success. Metal surfaces can be disinfected electrochemically. However, the effect of electrochemical treatments on biofilm-contaminated titanium is largely unknown. We hypothesized that electrochemical treatments are able to safely remove organic contamination and bacteria from titanium implants without altering their surfaces. This study was designed to assess the electrochemical properties of bacteria-contaminated surfaces in order to develop new treatments to clean titanium. Surface morphology, composition, bacterial load, and electrochemical properties of polished titanium discs were analyzed before and after biofilm contamination and subsequent decontamination with various electrochemical methods. The effect of the combination of the electrochemical with titanium brush cleaning was also evaluated. Results were then analyzed and compared to baseline readings (prior to contamination) using repeated measures ANOVA. Biofilm contamination increased the levels of carbon, nitrogen, and live bacteria on titanium surfaces while reducing their open circuit potential and corrosion resistance. Optimized electrochemical treatments with alternating current (-2.3 mA, + 22.5 µA) and voltages (1.8 V), were bactericidal and able to completely decontaminate saliva-contaminated titanium surfaces within 5 min while preserving surface integrity and histological quality of mammalian tissues. Furthermore, with the aid of mechanical brushing, the optimized electrochemical treatment was able to achieve complete decontamination of biofilm-contaminated Ti surfaces. The electrochemical treatment seems to be promising and well worth investigating for the clinical management of peri-implant infections.

A Matched-Paired Comparative Analysis of the Hemodynamics of the Trifecta and Perimount Aortic Bioprostheses.

BACKGROUND AND AIM OF THE STUDY: Current cohort studies comparing the Trifecta valve to alternative pericardial bioprostheses are limited by selection bias. The study aim was to determine if hemodynamics are improved after the aortic valve implantation of a Trifecta valve as compared to a standard pericardial valve, when evaluated using strict paired matching for specific key relevant confounders. METHODS: Valve hemodynamics were compared in patients undergoing implantation with a Trifecta or Perimount valve matched for left ventricular outflow tract (LVOT) diameter, gender, age, body size, and days since surgery, using a 1:1 matched-paired cohort analysis (n = 20 per group). RESULTS: Patients receiving a Trifecta valve had a larger increase in indexed stroke volume (SVi) relative to baseline compared to the Perimount patients (p = 0.013), in whom SVi was decreased. The mean transvalvular pressure gradient was lower in Trifecta patients despite the larger SVi (p = 0.02). The effective orifice area (EOA) and indexed EOA (EOAi) were significantly larger in Trifecta patients compared to Perimount patients (2.04 +/- 0.46 versus 1.77 +/- 0.45 cm2, p = 0.049; 1.10 +/- 0.22 versus 0.95 +/- 0.06 cm2/m2, p = 0.027, respectively), and there was a greater increase in EOA and EOAi from baseline (p = 0.010 for both). Severe prosthesis-patient mismatch (PPM) (EOAi < or = 0.65 cm2/m2) was seen in two (10%) of the Perimount cases, but in none of the patients with the Trifecta valve (p = 0.072). CONCLUSION: Trifecta valve implantation is associated with a significant improvement in EOA and a decreased incidence of PPM as compared to the Perimount valve. The superior hemodynamic outcomes observed support consideration of this valve for aortic valve replacement, particularly in patients with a small LVOT at risk for PPM.

Bisphosphonates inhibit bone remodeling in the jaw bones of rats and delay healing following tooth extractions.

OBJECTIVE: This study aimed to evaluate the impact of concurrent administration of clinically relevant doses of zoledronic acid (ZA) and dexamethasone (DX) on bone healing after tooth extraction (EXO). MATERIALS AND METHODS: Forty-four Sprague-Dawley rats (6-8 month old) were randomized into five groups: ZA + DX = weekly injection of ZA with DX for 7 weeks; WD = ZA with DX for 3 weeks then DX alone for 4 weeks; C = control saline for 7 weeks; ZA = ZA alone for 7 weeks and DX = DX alone for 7 weeks. ZA was administered at 0.13 mg/kg/week and DX at 3.8 mg/kg/week and body weights recorded at the time of injection. All rats underwent extraction (EXO) of the mandibular and maxillary first molars at 3 weeks and were euthanized at 7 weeks. The extracted and non-extracted sides of both jaws were harvested for micro-CT analyses. RESULTS: All rats, particularly those injected with ZA, exhibited weight gain till EXO followed by decline then recovery. ZA + DX group demonstrated highest fractional bone to tissue volume (BV/TV) in the non-extracted side. ZA + DX rats exhibited also highest volume and surface of sequestra. Only sequestra volume was statistically higher in the WD group compared to C group. CONCLUSION: Combined treatment with ZA and DX over a prolonged period inhibits bone remodeling and increased sequestra formation to a greater extent than either drug alone. Trauma caused by these sequestra cutting through the mucosa could play a key role in the development of BRONJ by potentially facilitating infection. ZA withdrawal may promote bone-remodeling reactivation following EXO.

A novel approach to safe redo-sternotomy in a patient with aortocutaneous fistula from an infected ascending aorta graft.

This case describes a novel approach to a safe redo-sternotomy in a patient presenting with an aortocutaneous fistula from a previous infected ascending aorta graft.

Effect of implant angulation on attachment retention in mandibular two-implant overdentures: a clinical study.

PURPOSE: Attachment wear can affect the performance of mandibular two-implant overdentures (IODs). This prospective clinical study aimed to investigate the effect of interimplant angulation on the retention achieved by two attachment systems at different time points within 1 year of wearing IODs. MATERIALS AND METHODS: Twenty-four patients (mean age = 73.2 years; standard deviation (SD) = 3.1) wearing IODs opposed by conventional maxillary complete dentures were randomly assigned to two groups in two-by-two crossover design. Retentive Anchor (RA) and Locator (LA) were installed in the IODs of both groups for 1 year, sequentially. Coronal and sagittal interimplant angulation were measured on posterior-anterior and lateral cephalometric radiographs. Retention was measured at baseline, 1 week, 3, 6, and 12 months postattachment installation. Data were analyzed using mixed models with α = 0.05. RESULTS: Mean coronal and sagittal interimplant angulations were 4.6 (SD = 2.9) and 3.5 (SD = 2.6) degrees, respectively. Only with LAs a statistically significant decrease was found in retention (average 1.1 Newton; standard error = 0.38; p = .007) per 1 degree increased sagittal interimplant angulation. CONCLUSIONS: Increased interimplant angulation appears to have higher impact on the retention of LA than of RA attachments. The effect of larger interimplant angulation on the loss of attachment retention and its clinical implications should be further assessed.

Preventive strategies for atrial fibrillation after cardiac surgery in Nordic countries.

BACKGROUND AND AIMS: Atrial fibrillation is a common arrhythmia after cardiac surgery. It increases morbidity, length of hospital stay, and costs of operative treatment. Beta-blockers, sotalol, amiodarone, corticosteroids, and biatrial pacing have been shown to be efficient in the prevention of postoperative atrial fibrillation. The aim of this study was to find out how widely different prophylactic strategies for postoperative atrial fibrillation are used in Scandinavian countries. MATERIAL AND METHODS: An online link for a questionnaire was emailed to (214) cardiac surgeons in Finland, Sweden, Norway, Denmark, and Estonia to assess the use of prophylactic methods for postoperative atrial fibrillation. RESULTS: A total of 97 surgeons responded to the survey. Oral beta-blockers were routinely used for atrial fibrillation prophylaxis by 62% of responders. The main reasons for nonuse of beta-blockers were that responders were unconvinced of the evidence of benefit or they preferred some alternative prophylaxis. Intravenous beta-blockers were used frequently by 6% of responders. Amiodarone was used for prophylaxis by 18% of responders. Nonusers were unconvinced of its efficacy, were afraid of its complications, or found its use too cumbersome. Other prophylactic atrial fibrillation strategies that were used are as follows: sotalol by 2%, magnesium by 17%, corticosteroids by 1%, and atrial pacing by 11% of respondents. CONCLUSIONS: There is still widely varying implementation of strategies for atrial fibrillation prophylaxis among Scandinavian cardiac surgeons. Lack of confidence in the efficacy of these approaches is the main rationale for nonimplementation.

Regulation of enamel hardness by its crystallographic dimensions.

Enamel is a composite biomaterial comprising a minor organic matrix (~2%) and a hierarchically organized inorganic ultrastructure (~96-98%). Surprisingly, to date there is no available information in the literature regarding the possible role of the enamel ultrastructure on the nanoscale level in tooth macroscopic properties. Understanding this relationship is of special interest for restorative purposes in dentistry. Accordingly, this study was designed to investigate how enamel nanocrystals regulate its hardness. We performed microindentation analysis on 100 extracted human teeth. The tooth enamel hardness was quantified and correlated with changes in enamel chemical composition and crystallographic dimensions obtained from Fourier transform infrared spectroscopy and X-ray diffraction, respectively. Enamel hardness was not related to the variability in organic content, but was associated with the size of apatite crystals along the c-axis. This association followed the Hall-Petch model for polycrystalline materials, indicating that the optimal size of apatite nanocrystals (larger than the critical size) provides enamel with the greatest hardness, which enables teeth to survive the heavy wear over a human lifetime.

Wear of matrix overdenture attachments after one to eight years of clinical use.

STATEMENT OF PROBLEM: Matrices of unsplinted attachment systems are generally reported to be the weak component of implant overdentures, often requiring frequent maintenance. Clinical wear results in reduced retention of the prosthesis, requiring activation or renewal of the matrix to restore the initial level of retention. PURPOSE: The purpose of this retrospective study was to measure the wear of the matrix of a ball attachment after various periods of clinical wear. MATERIAL AND METHODS: Seventy specimens of 3 groups of matrices of ball attachments that had been in use for mean periods of 12.3 months (1Y group, n=26), 39.0 months (3Y group, n=28) and 95.6 months (8Y group, n=16) were retrieved from 35 patients (2 specimens per patient) and measured on a coordinate measuring machine equipped with a touch trigger probe. Ten unused matrices were used as controls (CTRL group). The external and internal matrix diameters and deviations from circularity were measured. For the various time periods, the decreases in matrix thickness were calculated and compared with controls. Kruskal-Wallis 1-way ANOVA by ranks, followed by the Mann-Whitney post hoc tests, were conducted to test for differences in median values among groups (α =.05). RESULTS: For the internal upper diameter of the matrices tested, the Kruskal-Wallis and Mann-Whitney tests revealed significant differences for the 3 groups compared to the controls. For group 1Y, a significant difference (P<.001) of the internal upper diameter was found compared to the CTRL group. Compared to the controls, the nonparametric analyses for groups 3Y and 8Y showed significant differences for the internal upper diameter (P<.001) and deviations from circularity (P<.001). For groups 1Y, 3Y and 8Y, matrix thickness losses were 07, 47 and 70 µm, respectively. CONCLUSIONS: Within the limitations of this study, it was observed that one year of clinical wear had limited effect on the ball attachment matrices. Three to 8 years of clinical use resulted in a significant decrease of matrix thickness, especially at the tip of the retentive lamellae.

The role of enamel crystallography on tooth shade.

OBJECTIVES: Tooth shade is influenced by a combination of extrinsic-stains that are adsorbed to the enamel surface and by its intrinsic-shade resulting from the interaction of light with tooth structures. This study was designed to investigate how the variations in enamel ultrastructure may affect tooth optical properties. METHODS: One-hundred extracted teeth were collected from adult patients attending McGill-Undergraduate Dental Clinics. Shade-spectrophotometry, FTIR and XRD were used to assess tooth shade, enamel chemical composition and crystallography. The data obtained was analysed for Pearson correlation analysis and multiple linear regression analysis. The statistical significance was set at P < 0.05. RESULTS: Tooth shade parameters varied dramatically within the studied population. Pearson correlation analysis demonstrated that tooth hue was associated with enamel hydroxyapatite (HA) crystal size (R = -0.358; B = -0.866; P = 0.007), tooth chroma was associated with enamel HA carbonization (R = -0.419; B = -99.06; P = 0.005), and tooth lightness was associated with both enamel HA crystal size (R = -0.313; B = -1.052; P = 0.019) and the degree of HA carbonization (R = -0.265; B=-57.95; P = 0.033). Multiple linear regression analysis demonstrated that the size of enamel HA crystals and the relative content of mineral carbonate were the most important predictors for tooth shade lightness (P = 0.018) and chroma (P=0.008), respectively. In contrast, enamel organic content had no correlation with tooth shade. CONCLUSIONS: In the present study we have revealed that the tooth shade is regulated by the size of their HA enamel crystals. On the other hand, variation in the degree of enamel HA carbonization can also affect the tooth shade. These findings are of great relevance in dentistry since it provides better understanding of tooth aesthetics.