Effect of annealing on properties and performance of HfO2/SiO2 optical coatings for UV-applications.

The field of ultraviolet (UV)-laser applications is currently experiencing rapid growth in the semiconductor processing, laser micromachining and biomedical markets. Key enablers for these technologies are optical coatings used to manipulate and guide laser beams in a targeted manner. As laser power, laser fluence and pulse frequencies increase, the demands on the physical properties of the coating materials become more stringent. Ion beam sputtering is a technique that allows producing optical coatings with the low losses required in these applications. In this study, we investigate the influence of ion beam sputtering (IBS) parameters on the optical properties of HfO2 and SiO2 single layers as well as the impact of annealing duration at 475 °C for anti-reflective (AR) and highly reflective (HR) optical coatings at 355 nm. For HfO2 sputtered from a metal target the O2 flow during the coating process is a key parameter to reduce absorption. SiO2 single layers exhibit improved transmission in the UV-range as the ion beam energy for the sputtering process is reduced. Furthermore, a complex behavior for film stress, absorption, surface roughness and coating structure was unraveled as a function of annealing duration for AR- and HR-coatings at 355 nm. The reflectance of the HR-mirror after optimized annealing exceeded 99.94% at 355 nm and a high laser induced damage threshold (LIDT) of 6.9 J/cm2 was measured after 2 hours of annealing. For the AR-coating a LIDT-value of 15.7 J/cm2 was observed after 12 hours of annealing.

Meniscus formation in a capillary and the role of contact line friction.

We studied spontaneous formation of an internal meniscus by dipping glass capillaries of 25 µm to 350 µm radii into low volatile hexadecane and tributyl phosphate. X-ray phase contrast and high speed optical microscopy imaging were employed. We showed that the meniscus completes its formation when the liquid column is still shorter than the capillary radius. After that, the meniscus travels about ten capillary radii at a constant velocity. We demonstrated that the experimental observations can be explained by introducing a friction force linearly proportional to the meniscus velocity with a friction coefficient depending on the air/liquid/solid triplet. It was demonstrated that the friction coefficient does not depend on the capillary radius. Numerical solution of the force balance equation revealed four different uptake regimes that can be specified in a phase portrait. This phase portrait was found to be in good agreement with the experimental results and can be used as a guide for the design of thin porous absorbers.

Butterfly proboscis: combining a drinking straw with a nanosponge facilitated diversification of feeding habits.

The ability of Lepidoptera, or butterflies and moths, to drink liquids from rotting fruit and wet soil, as well as nectar from floral tubes, raises the question of whether the conventional view of the proboscis as a drinking straw can account for the withdrawal of fluids from porous substrates or of films and droplets from floral tubes. We discovered that the proboscis promotes capillary pull of liquids from diverse sources owing to a hierarchical pore structure spanning nano- and microscales. X-ray phase-contrast imaging reveals that Plateau instability causes liquid bridges to form in the food canal, which are transported to the gut by the muscular sucking pump in the head. The dual functionality of the proboscis represents a key innovation for exploiting a vast range of nutritional sources. We suggest that future studies of the adaptive radiation of the Lepidoptera take into account the role played by the structural organization of the proboscis. A transformative two-step model of capillary intake and suctioning can be applied not only to butterflies and moths but also potentially to vast numbers of other insects such as bees and flies.

Nanoporous artificial proboscis for probing minute amount of liquids.

We describe a method of fabrication of nanoporous flexible probes which work as artificial proboscises. The challenge of making probes with fast absorption rates and good retention capacity was addressed theoretically and experimentally. This work shows that the probe should possess two levels of pore hierarchy: nanopores are needed to enhance the capillary action and micrometer pores are required to speed up fluid transport. The model of controlled fluid absorption was verified in experiments. We also demonstrated that the artificial proboscises can be remotely controlled by electric or magnetic fields. Using an artificial proboscis, one can approach a drop of hazardous liquid, absorb it and safely deliver it to an analytical device. With these materials, the paradigm of a stationary microfluidic platform can be shifted to the flexible structures that would allow one to pack multiple microfluidic sensors into a single fiber.

Wire-in-a-nozzle as a new droplet-on-demand electrogenerator.

Many engineering applications assume the generation of single spherical droplets on demand. Piezo and thermo droplet-on-demand (DOD) instruments are not able to produce droplets with a broad range of size distributions from the same nozzle. We show that this challenge can be resolved using the principles of electrostatic generation and capillarity. A thin conductive wire threaded through a needle can be used as the droplet electrogenerator (or DOD generator). By applying a weak-bias electric field, one can deliver a drop from the needle edge to the free wire tip. When the drop moves toward the wire tip, it leaves behind a thin coating film. The capillary pressure of this cylindrical film helps isolate the droplet from the liquid source: the film spontaneously thins, breaking the connection between the droplet and the liquid source. The detachment of a pendant drop from the wire is then achieved by applying a short voltage pulse. Using the wire-in-a-needle nozzle, we were able to produce single droplets ranging from 50 to 500 µm, and we were able to deposit them with controlled velocity in a prescribed position. Therefore, the proposed method offers new opportunities in fields dealing with the DOD applications.