Hand hygiene: virucidal efficacy of a liquid hand wash product against Ebola virus.

BACKGROUND: Hand washing is an important targeted hygiene intervention for limiting the spread of infectious agents, including the Ebola virus, which continues to re-emerge. We have assessed the virucidal efficacy of a commercially available liquid hand wash product (LHW) for inactivating Ebola virus. METHODS: The ASTM E1052-11 Standard was used to evaluate the efficacy of an LHW containing the microbicidal active salicylic acid for inactivating Ebola virus - Makona variant suspended in an organic load. Three concentrations (12.5%, 25%, 50%) of three lots of LHW prepared in 440 ppm hard water were evaluated at room temperature for 20, 30, and 60 s contact time. RESULTS: A 25% solution of the LHW caused 4.5 log10 and 4.8 log10 reduction in Ebola virus titer within 20 and 30 s, respectively. The efficacy of a 12.5% LHW solution was lower (1.9 and 2.0 log10 reduction in titer within 20 and 30 s, respectively). The efficacy of the 50% LHW solution could not be measured, due to inability to sufficiently neutralize the LHW at the end of exposure. CONCLUSION: These results suggest the potential utility of an appropriately formulated liquid hand wash agent during Ebola virus disease outbreaks for use within healthcare, community, and home settings. Such an LHW should also be effective against other enveloped viruses, such as the pandemic coronavirus SARS-CoV-2.

Use of a small-scale, portable test chamber for determining the bactericidal efficacy of aerosolized glycol formulations.

This study aimed to understand the efficacy and mechanisms of action of an aerosolized glycol-ethanol formulations against bacteria. We validated a small-scale in-house test chamber to determine the microbicidal efficacy of four aerosolized formulations combining dipropylene glycol and ethanol against Staphylococcus aureus and Escherichia coli embedded in alginate. The aerosolized glycol/ethanol formulation decreased bacterial viability by 3 log10 and was more efficacious than an ethanol only control formulation. Electron microscopic examination indicated extensive structural damage in both bacteria, and membrane damage was confirmed with potassium release in S. aureus and DNA release in E. coli. The development of a small test chamber facilitated the measurement of the microbicidal efficacy and experiments to understand the mechanism of action of an aerosolized microbicidal formulation. SIGNIFICANCE AND IMPACT OF THE STUDY: There is an increased interest in developing effective microbicidal-aerosolized formulations. The development of a small in-house test chamber allowed the measurement of the microbicidal efficacy of an aerosolized glycol/ethanol formulation at a low cost. We showed that a glycol/ethanol aerosolized formulation caused extensive structural damage in Gram-negative and -positive bacteria resulting in a 3 log10 reduction in viability.

A quantitative method to assess the role of indoor air decontamination to simultaneously reduce contamination of environmental surfaces: testing with vegetative and spore-forming bacteria.

Indoor air can spread pathogens, which can be removed/inactivated by a variety of means in healthcare and other settings. We quantitatively assessed if air decontamination could also simultaneously reduce environmental surface contamination in the same setting. Two types of vegetative bacteria (Staphylococcus aureus and Acinetobacter baumannii), and a bacterial spore-former (Geobacillus stearothermophilus) were tested as representative airborne bacteria. They were separately aerosolized with a Collison nebulizer into a 24-m3 aerobiology chamber and air samples collected with a programmable slit-to-agar sampler. Settling airborne particles were collected on culture plates placed at, and collected from, five different locations on the floor of the chamber with a custom-built remote plate-placement and -retriever system. Experimentally contaminated air in the chamber was decontaminated for 45 min with a device based on HEPA filtration and UV light. The plates were incubated and CFU counted. The device reduced the viability levels of all tested bacteria in the air by >3 log10 (>99·9%) in 45 min. Based on two separate tests, the average reductions in surface contamination for S. aureus, A. baumannii and G. stearothermophilus were respectively, 97, 87 and 97%. We thus showed that air decontamination could substantially and simultaneously reduce the levels of surface contamination in the same setting irrespective of the type of pathogen present. SIGNIFICANCE AND IMPACT OF THE STUDY: The innovative and generic test protocol described can quantitatively assess the reduction in environmental surface contamination from microbial decontamination of indoor air in the same setting. This added advantage from air decontamination has implications for infection prevention and control in healthcare and other settings without the need for additional expense or effort. Continuous operation of an air decontamination device, such as the one tested here, can lead to ongoing reductions in pathogens in air and on environmental surfaces.

Fluid pressure diffusion effects on the seismic reflectivity of a single fracture.

When seismic waves travel through a fluid-saturated porous medium containing a fracture, fluid pressure gradients are induced between the compliant fracture and the stiffer embedding background. The resulting equilibration through fluid pressure diffusion (FPD) produces a frequency dependence of the stiffening effect of the fluid saturating the fracture. As the reflectivity of a fracture is mainly controlled by the stiffness contrast with respect to the background, these frequency-dependent effects are expected to affect the fracture reflectivity. The present work explores the P- and S-wave reflectivity of a fracture modeled as a thin porous layer separating two half-spaces. Assuming planar wave propagation and P-wave incidence, this article analyzes the FPD effects on the reflection coefficients through comparisons with a low-frequency approximation of the underlying poroelastic model and an elastic model based on Gassmann's equations. The results indicate that, while the impact of global flow on fracture reflectivity is rather small, FPD effects can be significant, especially for P-waves and low incidence angles. These effects get particularly strong for very thin and compliant, liquid-saturated fractures and embedded in a high-permeability background. In particular, this study suggests that in common environments and typical seismic experiments FPD effects can significantly increase the seismic visibility of fractures.

Immunogenicity and safety of a 13-valent pneumococcal conjugate vaccine in adults 18-49 years of age, naive to 23-valent pneumococcal polysaccharide vaccine.

BACKGROUND: Based on the success of vaccination with pneumococcal conjugate vaccines (PCVs) in children, recent studies have focused on PCVs in adults. Data from a randomized, double-blind study comparing the immunogenicity, tolerability, and safety of the 13-valent PCV (PCV13) and the 23-valent pneumococcal polysaccharide vaccine (PPSV23) in PPSV23-naive adults 60-64 years of age have been published. The same study also included a cohort of adults aged 18-49 years that received open-label PCV13. The purpose of this cohort was to examine the immunogenicity, safety, and tolerability of PCV13 in adult subjects 18-49 years of age compared with adults 60-64 years of age for whom PCV13 is approved. METHODS: Adults naive to PPSV23 were grouped by age into 2 cohorts: 18-49 years (n=899; further stratified by age into 3 subgroups 18-29, 30-39, and 40-49 years) and 60-64 years (n=417). All subjects received 1 dose of PCV13. In both age groups, immunogenicity was assessed by antipneumococcal opsonophagocytic activity (OPA) geometric mean titers (GMTs) and IgG geometric mean concentrations (GMCs) 1 month after vaccination. Safety and tolerability were evaluated. RESULTS: In adults aged 18-49 years, OPA GMTs and IgG GMCs were noninferior for all 13 serotypes and statistically significantly higher for all except 1 serotype (OPA GMT) and 5 serotypes (IgG GMCs) compared with adults 60-64 years. Immune responses were highest in the youngest age subgroup (18-29 years). Local reactions and systemic events were more common in adults 18-49 years compared with 60-64 years and were self-limited. CONCLUSION: Immune responses to PCV13 are robust in adults ≥18 years of age, with highest responses observed in the youngest subgroup. Based on its safety and immunologic profile, PCV13 may serve an important therapeutic role in younger adults, particularly those with underlying medical conditions who have an increased risk of serious pneumococcal infections.

Seismic wave attenuation and dispersion due to wave-induced fluid flow in rocks with strong permeability fluctuations.

Oscillatory fluid movements in heterogeneous porous rocks induced by seismic waves cause dissipation of wave field energy. The resulting seismic signature depends not only on the rock compressibility distribution, but also on a statistically averaged permeability. This so-called equivalent seismic permeability does not, however, coincide with the respective equivalent flow permeability. While this issue has been analyzed for one-dimensional (1D) media, the corresponding two-dimensional (2D) and three-dimensional (3D) cases remain unexplored. In this work, this topic is analyzed for 2D random medium realizations having strong permeability fluctuations. With this objective, oscillatory compressibility simulations based on the quasi-static poroelasticity equations are performed. Numerical analysis shows that strong permeability fluctuations diminish the magnitude of attenuation and velocity dispersion due to fluid flow, while the frequency range where these effects are significant gets broader. By comparing the acoustic responses obtained using different permeability averages, it is also shown that at very low frequencies the equivalent seismic permeability is similar to the equivalent flow permeability, while for very high frequencies this parameter approaches the arithmetic average of the permeability field. These seemingly generic findings have potentially important implications with regard to the estimation of equivalent flow permeability from seismic data.

Rhinovirus contamination of surfaces in homes of adults with natural colds: transfer of virus to fingertips during normal daily activities.

Multiple surfaces contaminated with rhinovirus were detected in hotel rooms by reverse transcriptase-polymerase chain reaction (RT-PCR) following occupancy by a cold sufferer. Whether infectious rhinovirus contaminates surfaces in homes and is transferred from surfaces to fingertips through normal activities is not known. Nasal secretions from 30 subjects with new colds were tested for rhinovirus genome by RT-PCR; infectious rhinovirus was sought with tissue cultures. Each subject identified 10 sites in their home touched during the preceding 24 hr. Samples from sites were tested for rhinovirus by RT-PCR and cell culture. Later, each subject's mucus (stored at -70°C) was deposited on surfaces for testing transfer to fingertips through daily life activities such as flipping a light switch, touching the telephone keypad, and holding the telephone handset. Nasal secretions from 16/30 subjects were positive for rhinovirus by RT-PCR; 66 (41%) of 160 surfaces in homes were positive. Contaminated surfaces included doorknobs (6 positive/18 tested), refrigerator door handles (8/14), TV remote controls (5/10), and bathroom faucets (8/10). Five (19%) of 26 RT-PCR positive sites from culture positive subjects were positive in cell culture. Nasal mucus from six culture positive subjects was deposited on objects. Infectious rhinovirus was detected on 22% of fingertips following contact with objects contaminated for 1 hr; transfer dropped to 3% after 24 hr of contamination, and 0% after 48 hr. Infectious rhinovirus found on surfaces in homes of people with colds can be transferred to fingertips, but infectivity of virus in mucus declines by 24 hr after deposition.

Investigation of antibiotic and antibacterial agent cross-resistance in target bacteria from homes of antibacterial product users and nonusers.

AIM: To describe the relationship between antibiotic and antibacterial resistance in environmental and clinical bacteria from home environments across geographical locations, relative to the use or nonuse of antibacterial products, with a focus on target organisms recognized as potential human pathogens. METHODS AND RESULTS: In a randomized study, environmental and clinical samples were collected from the homes of antibacterial product users (n=30) and nonusers (n=30) for the isolation of target bacteria for antibiotic and antibacterial testing in three geographical areas (in USA and UK). Isolates were tested for antibiotic susceptibility, with selected antibiotic-resistant and antibiotic-susceptible isolates tested against four common antibacterial agents (triclosan, para-chloro-meta-xylenol, pine oil and quaternary ammonium compound). Prequalified users and nonusers at each location were randomly selected after meeting exclusionary criteria. Of 1238 isolates, more target bacteria were recovered from nonuser than user homes. Of Staphylococcus aureus isolates (n=33), none showed resistance to oxacillin or vancomycin; for Enterococcus sp. (n=149), none were resistant to ampicillin or vancomycin; and for Klebsiella pneumoniae (n=54)and Escherichia coli (n=24), none were resistant to third generation cephalosporins. Antibiotic resistance to one or more of the standard test panel drugs for Gram-positive and Gram-negative target bacteria was comparable between nonuser and user homes for both environmental and clinical isolates [e.g. resistance of environmental coagulase-negative (CN) Staphylococcus sp. was 73.8% (124/168) from nonuser homes and 73.0% (111/152) from user homes, and Enterobacteriaceae other than E. coli, 75.9% (186/245) from nonuser homes compared with 78.0% from user homes]. Of 524 Gram-negatives tested against preferred/alternative drugs, 97.1% (509/524) were susceptible to all antibiotics, across both groups. Isolates of S. aureus, Enterococcus sp. and CN Staphylococcus sp. susceptible to all preferred treatment drugs showed comparable antibacterial minimum inhibitory concentration (MIC) results between nonuser and user home isolates. For Gram-positives resistant to one or more preferred drugs, greatest resistance to antibacterial active ingredients was found in the nonuser group. For Gram-negatives, the antibacterial MIC data were comparable for isolates that were fully susceptible and resistant to one or more preferred/alternative treatment antibiotics. CONCLUSIONS: The results showed a lack of antibiotic and antibacterial agent cross-resistance in target bacteria from the homes of antibacterial product users and nonusers, as well as increased prevalence of potential pathogens in nonuser homes. SIGNIFICANCE AND IMPACT OF THE STUDY: It refutes widely publicized, yet unsupported, hypotheses that use of antibacterial products facilitates the development of antibiotic resistance in bacteria from the home environment.

Overview of Lysol scientific studies.

When followed, simple hygienic practices such as handwashing and surface disinfection along with proper food handling techniques can have a positive impact on the health of families and individuals in nonmedical settings like homes, day care and long term care facilities. Several studies have attempted to identify the specific role surface disinfectants can play in this effort. The evidence seems to indicate that these types of products, when properly used, can be beneficial. Because it has been established that environmental surfaces act as intermediates in the transmission of microorganisms throughout the day-care center and in homes, future studies should be developed to quantitate the impact of specific interventions in the reduction of microorganisms.

Effect of a comprehensive infection control program on the incidence of infections in long-term care facilities.

BACKGROUND: Control of infection within the long-term care facility is a daunting problem. Elderly patients are at high risk for contracting infection because of reduced innate immunity, malnutrition, and the presence of chronic medical conditions. This small study tested the effect of developing and implementing a comprehensive preventive infection control program in the long-term care setting and examined the resultant incidence of infections. METHODS: Eight private, freestanding, long-term care facilities in urban and suburban settings were selected for the study. The 4 test sites had a total of 443 beds; there were 447 beds in 4 matched control sites. Data on infection rates were accrued in both preintervention and intervention years. The control homes maintained their existing infection control policies and procedures. The test homes were provided with an infection control educational program and replaced all currently used germicidal products with single-branded products for a 12-month period. A criteria-based standardized infection control surveillance system was used to monitor and report infections in all facilities. RESULTS: In the preintervention year, the test sites experienced 743 infections (incidence density rate, 6.33) and the control homes experienced 614 infections (incidence density rate, 3.39). In the intervention year, the test homes reported 621 infections, a decrease of 122 infections (incidence density rate, 4.15); in the control homes, the number of infections increased slightly, to 626 (incidence density rate, 3.15). The greatest reduction in infections in the test homes was in upper respiratory infections (P =.06). CONCLUSIONS: This study provides additional evidence that a comprehensive infection control program that includes handwashing and environmental cleaning and disinfecting may help reduce infections among the elderly residing in long-term care settings.

Photoinduced particulate matter in a parenteral formulation for bisnafide, an experimental antitumor agent.

This paper assesses the cause of particulate formation in vials of the experimental antitumor agent bisnafide and investigates pharmaceutical techniques to reduce the number of particulates in the product. Solution preparation and particulate isolation were performed under Class 100 laminar air flow. Reversed-phase HPLC and infrared microscopy were used to characterize drug and isolated particulate matter, whereas a Hiac particle counter was used to quantify the particulate matter. Particulate matter was observed following agitation of the drug solutions and was found to be associated with specific lots of drug substance. HPLC of the isolated particulate matter indicated that the particulates consisted largely of bisnafide and impurities that were identified as the products of photodegradation, confirmed to be the result of the photolytic cleavage of bisnafide to form a poorly soluble aldehyde. The aldehyde may, in turn, interact with bisnafide molecules to form the particulate matter as suggested by the observed pH-dependent reversibility of the particulate phenomenon. The particulate matter could be reduced by protecting solutions of bisnafide from light during chemical synthesis and production of the dosage form and, alternatively, by reducing the solution pH to 3.0 or less, addition of surfactants below their critical micelle concentration, and removal of impurities by froth flotation of the bisnafide solutions.

Validation of cleaning procedures for highly potent drugs. II. Bisnafide.

The objective of this work was the development and validation of procedures designed to clean glass and stainless steel surfaces after exposure to the experimental anticancer drug, bisnafide. The cleaning procedures, using 5% acetic acid water, Alconox, and water, were validated using a wipe test and an HPLC method developed to quantitate low levels of bisnafide. The procedure developed for cleaning stainless steel is more stringent than that for glass because of the apparent greater affinity of bisnafide for stainless steel. The HPLC method is shown to be linear and reproducible (RSD 4.4% or less), with a detection limit of 4 ng/ml. Recoveries of 95.1, 83.5, and 70.0% were obtained from the wipe pads, glass plates, and stainless steel plates, respectively, at levels of approximately 0.7-1.7 ng/cm2. The cleaning procedures are shown to clean glass and stainless steel plates to less than 0.19 and 0.33 ng bisnafide/cm2, respectively. These results further demonstrate the need to fully characterize the recovery of drugs from surfaces and swabs in order to properly validate cleaning procedures. In addition, they demonstrate the potential need to develop surface-specific cleaning procedures.

Development of a model for evaluation of microbial cross-contamination in the kitchen.

Foods can become contaminated with pathogenic microorganisms from hands, the cutting board, and knives during preparation in the kitchen. A laboratory model was developed to determine occurrence of cross-contamination and efficacy of decontamination procedures in kitchen food-handling practices. Enterobacter aerogenes B199A, an indicator bacterium with attachment characteristics similar to that of Salmonella spp., was used. Chicken meat with skin inoculated with 10(6) CFU of E. aerogenes B199A/g was cut into small pieces on a sterile cutting board. The extent of cross-contamination occurring from meat to the cutting board and from the cutting board to vegetables (lettuce and cucumbers) subsequently cut on the board was determined. Swab samples from the cutting board, hand washings, and lettuce and cucumber samples revealed that approximately 10(5) CFU of E. aerogenes/cm2 were transferred to the board and hands and approximately 10(3) to 10(4) CFU of E. aerogenes/g to the lettuce and cucumbers. The surfaces of the cutting board and hands were treated with antibacterial agents after cutting the meat, and counts of E. aerogenes on the cutting board and vegetables (lettuce and cucumbers) were determined. Results revealed that use of the disinfectant reduced the population of E. aerogenes to almost nondetectable levels on the cutting boards. The average counts after treatment were < 20 CFU/g of vegetable and ranged from < 20 to 200 CFU per cm2 or g on the cutting board and subsequently on the vegetables. These results indicate that bacteria with attachment characteristics similar to Salmonella spp. can be readily transferred to cutting boards during food preparation and then cross-contaminate fresh vegetables if the boards are not cleaned. Application of a kitchen disinfectant can greatly reduce bacterial contamination on cutting boards.

Dynamic compatibility testing of DMP 840, an experimental antitumor agent.

The purpose of this study is to evaluate the potential for DMP 840, a novel experimental antitumor agent, to precipitate during injection or dilution with infusion solutions. The influence of predilution of the drug solution before injection and addition of buffers to the drug vehicle were also investigated. The compatibility of normal saline solution, pH 7.4 phosphate buffers, and human plasma with DMP 840 was examined in vitro under both static conditions and dynamic flow. The combination of DMP 840 solutions with normal saline solution resulted in conversion of the drug to an insoluble dihydrochloride salt. Under conditions of dynamic flow, precipitation, accompanied by large changes in turbidity, occurred at relatively high concentrations of the drug in the injection solution. Dilution of the injection solution below 2 mg/mL or slow injection avoided precipitation. As was the case with the normal saline system, turbidity changes after injection into protein-phosphate buffer (PPB) were dependent on the initial concentration of DMP 840 solution as well as the rate of administration. In addition, the maximum injection rate at which complete miscibility occurred increased exponentially as the drug injection solution was made more dilute. Buffering the DMP 840 injection solution with acetate buffer improved the miscibility of DMP 840 with PPB, which indicated that the turbidity increases were most likely due to conversion of the drug to its insoluble free base form. The observed effects of the buffer on the turbidity response agreed qualitatively with predictions from a graphical approach that considers the effects of dilution and pH changes on drug solubility. Despite these observations, no evidence for the formation of a solid precipitate could be found after injection of the unbuffered drug solution into PPB. Further investigation indicated that the presence of albumin in the PPB prevented the formation of a solid phase during injection. Likewise, fresh human plasma, spiked with 1 and 2 mg/mL solutions of DMP 840, showed no evidence for the formation of a solid precipitate.

Characterization and quantification of bacterial pathogens and indicator organisms in household kitchens with and without the use of a disinfectant cleaner.

This two year study evaluated the prevalence of indicator bacteria and specific pathogens in 10 'normal' kitchens in the United States. In Phase I, none of the kitchens was cleaned with an antimicrobial cleaner or disinfectant. Eight locations within the kitchens were monitored for: total heterotrophs, staphylococci, Pseudomonas, total coliforms and faecal coliforms. Almost all locations at all households exhibited contamination, with the sink and sponge samples exhibiting large bacterial concentrations. The faecal coliform concentrations in sink and sponge samples were very high, with 63 and 67% of all samples being positive, respectively. Escherichia coli was detected in 16.7% of all sink surfaces and 33.3% of all sponges. Salmonella was detected once and Campylobacter, on two occasions. In a second phase, households were provided with an antimicrobial disinfectant cleaner which families were encouraged to use but not forced to do so; in some cases, the product was used infrequently or not at all. This regimen did not demonstrate any consistent reduction in the incidence of bacterial contamination. By contrast, in the final phase of the study where disinfectant use was targeted for surfaces soon after contamination with foods or hands, the incidence of contamination decreased dramatically. These data show that normal kitchens can easily be contaminated with a variety of bacterial contaminants including faecal coliforms, E. coli, Salmonella and Campylobacter. Irregular use, or not using antimicrobial agents, is unlikely to reduce the risk of these infectious agents. By contrast, targeted use is likely to reduce the incidence of bacterial contaminants.

Impact of an infection control program in a specialized preschool.

BACKGROUND: The purpose of this study was to design and implement a comprehensive infection control program and measure its effects on the number and types of infectious illnesses experienced by children attending a specialized preschool program. METHODS: Participants in the study were children with Down syndrome enrolled in a school-based early intervention program. The ages of the children ranged from 6 weeks to 5 years. Through a series of parental questionnaires, the number and types of infections in the children were chronicled for a year before and a year after the implementation of an infection control intervention program. Interventions included infection control lectures, handouts, posters, and attention to environmental cleaning and disinfection, with an emphasis on toys. Compliance with these measures was monitored and recorded. RESULTS: During the interventional year the median number of total illnesses/child/month decreased significantly from the baseline year (0.70 vs 0.53, p < 0.05), with a trend toward a decrease in the number of respiratory illnesses (0.67 vs 0.42, p < 0.07). Significant decreases were also seen for the median number of physician visits (0.50 vs 0.33, p < 0.05), courses of antibiotics administered (0.33 vs 0.28, p < 0.05), and days of school missed as a result of respiratory illness (0.75 vs 0.40, p < 0.05). CONCLUSIONS: This study demonstrates a decrease in infection rates with the implementation of a comprehensive educational and environmental infection control program in a day care setting.

Validation of cleaning procedures for highly potent drugs. I. Losoxantrone.

The validation of a procedure designed to clean glass and stainless steel surfaces after exposure to the experimental anticancer drug losoxantrone is described. The cleaning procedure, using water and hypochlorite bleach, was validated using a wipe test and a high-performance liquid chromatography (HPLC) method developed to quantitate low levels of losoxantrone. The HPLC method is shown to be linear and reproducible (relative standard deviation (RSD): 7.1% or less), with a detection limit of 2 ng/ml. Recoveries of 71.0%, 50.1%, and 57.6% were reproducibly obtained from the wipe pads, glass plates, and stainless steel plates, respectively, at levels of 70-140 ng per 100 cm2. The cleaning procedure is shown to clean glass and stainless steel plates to less than 20 ng and 17 ng losoxantrone per 100 cm2, respectively. These results demonstrate the need to fully characterize the recovery of drugs from surfaces and swabs in order to properly validate cleaning procedures.

Bacterial mutagens in the urine of patients under tinidazole treatment.

Tinidazole is an antiparasitic drug belonging to the 5-nitroimidazole family. It is prescribed against protozoal infestations and is widely used in Mexico as well as other underdeveloped countries where infectious diseases are the first cause of children mortality. The drug is a direct mutagen in Salmonella typhimurium TA100 strain and the presence of S9 mixture did not modify its mutagenic effect. At low doses no mutagenicity was detected with strains TA100NR, TA98 or UTH8414 (Uvr+ derivative of TA100). Urine from four patients under tinidazole treatment exhibited a mutagenic activity on strain TA100, greater than the expected from the tinidazole concentrations determined by high-performance liquid chromatography (HPLC). Components from the urine samples were separated on thin-layer chromatography (TLC) plates, and their mutagenic effects tested by direct application of the Salmonella assay onto sections of the developed chromatoplate. The Rf of one component (0.62) corresponded to the one obtained for a tinidazole standard and showed the expected mutagenicity, while a second component with an Rf=0.39, exhibited a mutagenic potency slightly greater than the observed for tinidazole; however, as in the case of the drug itself, reduction of the nitro group was necessary for a mutagenic activity.

Improvements in health-related quality of life with sumatriptan treatment for migraine.

BACKGROUND: The debilitating effects of migraine might be reduced in patients using an effective migraine medication. The serotonin (5HT1) receptor agonist sumatriptan has been shown in clinical trials to alleviate headache and associated symptoms in the majority of patients treated. METHODS: Three hundred forty-four (344) patients with migraine were allowed to treat an unlimited number of migraine attacks for up to 24 months with subcutaneous sumatriptan (6 mg). Open-label oral sumatriptan (100 mg) could be used between 1 hour and 24 hours after the initial injection for treatment of recurrent or persistent headache. On four occasions during the treatment period, patients completed the Medical Outcomes Study Short Form-36 Health Survey, a general health status instrument; the Migraine-Specific Quality of Life Questionnaire, a disease-specific instrument; and a series of questions designed to measure the impact of migraine on productivity and disability. RESULTS: Treatment with sumatriptan was associated with significant (P < .05) improvements relative to baseline in three of the Short Form-36 Health Survey quality-of-life dimensions (Bodily Pain, General Health Perceptions, and Social Functioning) and three of the Migraine-Specific Quality of Life Questionnaire dimensions (Role Function-Restrictive, Role Function-Preventive, and Emotional Function). Significant (P < .05) improvements in patient-rated productivity and reductions in patient-rated disability also occurred during the trial. CONCLUSIONS: Patients using sumatriptan to treat migraines for up to 24 months experienced improvements in disability and productivity as well as in health-related quality of life as measured either by a general health status instrument or a disease-specific instrument.