ABSTRACT
Porous cellulose matrices were prepared via cellulose dissolution in 8wt% NaOH-water, physical gelation and chemical cross-linking with epichlorohydrin (ECH), coagulation in water and lyophilisation. Cellulose and cross-linker concentration were varied. The behaviour of gels upon coagulation and the swelling of cryogels in water were analysed. An anomalous high swelling at cross-linker concentration around stoichiometric molar ratio with cellulose was observed. Cellulose cryogel morphology, crystallinity and density were studied. The influence of chemical cross-linking on cellulose swelling was explained by suggesting that ECH acts as a spacer preventing cellulose chains tight packing during coagulation. Cellulose was loaded with a model drug, procaine hydrochloride, and the kinetics of its release was investigated.
Subject(s)
Cellulose/chemistry , Cryogels/chemistry , Anesthetics, Local/chemistry , Cross-Linking Reagents/chemistry , Delayed-Action Preparations/chemistry , Drug Liberation , Epichlorohydrin/chemistry , Molecular Structure , Procaine/chemistryABSTRACT
Monolithic pectin aerogels, aeropectins, were prepared via dissolution-gelation-coagulation and subsequent drying with supercritical CO2. Aeropectin had pore sizes that varied from mesopores to small macropores and compression moduli in the range from 4 to 18 MPa. Aeropectins show plastic deformation up to 60% strain before the pore walls collapse. Pectin aerogels have a thermal conductivity below that of air in ambient conditions, making them new thermal superinsulating fully biomass-based materials. The contribution of gas and solid conduction plus radiative heat transfer were determined and discussed.
Subject(s)
Biomass , Citrus/chemistry , Gels/chemistry , Malus/chemistry , Pectins/chemistry , Thermal Conductivity , Biomechanical Phenomena/physiology , Pectins/isolation & purificationABSTRACT
Cellulose solubility phase diagrams in two binary solvents based on 1-ethyl-3-methylimidazolium acetate (EmimAc) mixed with water and with dimethylsulfoxide (DMSO) were built. The minimal amount of EmimAc molecules needed to dissolve cellulose is 2.5-3moles per anhydroglucose unit. This proportion allows calculation of the maximal cellulose concentration soluble in EmimAc-DMSO at any composition; in EmimAc it is around 25-27wt%. Water forms hydrogen bonds with EmimAc and thus competes with cellulose for ionic liquid; the solubility of cellulose in EmimAc-water is much lower than that in EmimAc-DMSO. Hydrodynamic properties of cellulose in two solvent systems were compared. In EmimAc-DMSO cellulose intrinsic viscosity practically does not depend on DMSO content as predicted by the phase diagram. The intrinsic viscosity in EmimAc-water first increases with water content due to cellulose self-aggregation and then abruptly decreases due to coagulation.
Subject(s)
Cellulose/chemistry , Dimethyl Sulfoxide/chemistry , Imidazoles/chemistry , Ionic Liquids/chemistry , Water/chemistry , Hydrodynamics , Phase Transition , Solubility , Solvents/chemistry , ViscosityABSTRACT
Rheological properties of cellulose acetate/1-ethyl-3-methylimidazolium acetate (EMIMAc) solutions are studied using shear dynamic and steady state rheology in a large range of polymer concentrations (from 0.1 to 10 wt.%) and temperatures (from 0 °C to 80 °C). Master plots for storage and loss moduli and for dynamic viscosity were built and shift parameters determined. Cellulose acetate/EMIMAc behaves as a classical polymer solution and obeys Cox-Merz law. Cellulose acetate intrinsic viscosity [η] was determined as a function of temperature and compared with the literature data for cellulose acetates dissolved in other solvents and cellulose dissolved in EMIMAc. Cellulose acetate intrinsic viscosity turned out to be much less temperature sensitive than that of cellulose. Specific viscosity-C[η] master plot was built: the slopes in log-log scale are 1.2 and 3.1 in dilute and semi-dilute regions, respectively. The activation energy as a function of concentration follows a power-law dependence.
Subject(s)
Cellulose/analogs & derivatives , Hydrodynamics , Imidazoles/chemistry , Ionic Liquids/chemistry , Rheology , Cellulose/chemistry , Solutions , Temperature , Thermodynamics , ViscosityABSTRACT
Mixtures of 1-ethyl-3-methyl-imidazolium acetate ([C2mim][OAc]) and water across the entire composition range, from pure [C2mim][OAc] to pure water, have been investigated using density, viscosity, and NMR spectroscopy, relaxometry, and diffusion measurements. These results have been compared to ideal mixing laws for the microscopic data obtained from the NMR results and macroscopic data through the viscosity and density. It was also found that the mixing of the two fluids is exothermal. The proton spectra indicate though that [C2mim][OAc] and water are interacting without the formation of new compounds. The maximal deviations of experimental data from theoretical mixing rules were all found to occur within the range 0.74 ± 0.06 mol fraction of water, corresponding to approximately three water molecules per [C2mim][OAc] molecule.