ABSTRACT
Syphilis is a sexually transmitted infection (STI) considered a public health problem that affects vulnerable and at-risk populations, such as sex workers. We designed a retrospective cross-sectional study based on the review of health evaluation records of sex workers who attended consultations to obtain comprehensive health cards at a Health Center in the Province of San Vicente de Cañete in Peru during the year 2020. We obtained sociodemographic and employment information and the RPR (rapid plasma reagin) test results to diagnose syphilis. We evaluated 220 records of sex workers with a mean age of 27.9â ±â 6.9 years and the initiation of sexual relations of 16.0â ±â 1.6 years, while the accumulated time they had as sex workers was 2.9â ±â 2.4 years. 85.9% of those evaluated reported being heterosexual. The prevalence of syphilis was 7.3% (CI95: 4.2%-11.5%). Being a homosexual sex worker was significantly associated with syphilis (OR: 19.6; 95% CI: 4.8-80.0) compared to heterosexuals. The prevalence of syphilis presented a value similar to that reported in other Latin American and national studies, and it is evident that it is a health problem among sex workers.
Subject(s)
Sex Workers , Syphilis , Female , Humans , Young Adult , Adult , Syphilis/epidemiology , Peru/epidemiology , Cross-Sectional Studies , Retrospective Studies , Seroepidemiologic StudiesABSTRACT
Managing contaminated waste in blood banks is a crucial process that must end with the safe disposal of blood products. In this sense, practical methods and indicators must be used to guarantee the operability of autoclave equipment and the sterility of treated waste to mitigate the risk of biological exposure and hospital biosafety. We designed a cross-sectional study to evaluate the performance the autoclaving process with Bowie & Dick test and biological indicator at the Hemotherapy and Blood Bank Unit of the Cayetano Heredia Hospital in Peru. Fifty autoclaving processes were carried out independently for the Bowie & Dick tests and biological indicators based on Geobacillus stearothermophilus spores. Autoclaving was programmed at 134°C for 3.5 minutes for the Bowie & Dick test, while, for the biological indicator, it was programmed at 121°C for 5 minutes. Both in the presence of contaminated waste. The autoclaving process evaluated by the Bowie & Dick test had a compliance rate of 80% (CI95: 66.3%-90.0%), while, by the biological indicator, 90% (CI95: 78.2%-96.7%). We did not find significant differences between the results of both tests (Pâ =â .689; Fisher exact test). The compliance rate in the autoclaving process within the blood bank of a Peruvian Hospital is acceptable; however, there are actions for continuous improvement, especially at the vacuum level in the autoclaving process.
Subject(s)
Blood Banks , Environmental Biomarkers , Humans , Peru , Cross-Sectional Studies , Sterilization , Quality ControlABSTRACT
OBJECTIVE: We aim to assess the accuracy and effectiveness of the HemoCue 301, a point-of-care (POC) device for measuring hemoglobin levels, and detecting anemia among individuals living in Tumbes, a rural, underserved area in Northern Peru. METHODS: Baseline analysis of a clinical trial aimed at assessing the effect of multi-fortified bread (NCT05103709). Adult women with capillary blood HemoCue 301 readings below 12 g/dL were recruited in coastal city of Tumbes, Peru. A total of 306 women took part of the study, venous blood samples were taken and analyzed with an automated hematology analyzer. Serum samples were used to measure ferritin, serum iron and C reactive protein. RESULTS: Capillary blood measured by the Hemocue 301 has a bias of 0.36 ± 0.93 g/dL respect to the automated Hb. More than 50% of women with normal ferritin values were classified as anemics according to the HemoCue 301. Automated Hb cut-off of 10.8 g/dL [AUC 0.82 (0.77-0.88)] had a specificity of 0.817 and a sensitivity 0.711 while with the HemoCue 301 cut-off of 11.1 g/dL [AUC 0.71 (0.62-0.79)] had a specificity of 0.697 and a sensitivity 0.688. The performance of the automated Hb cut-off was significantly better than the HemoCue (p<0.001). CONCLUSION: Caution must be taken when using POC devices, especially with values around the threshold. Cut-off values found in our study could be used as surrogate means when no confirmatory tests are available. Clinical outcomes should be prioritized when diagnosing iron deficiency anemia in women of reproductive age to ensure proper diagnosis.
Subject(s)
Anemia , Hematology , Adult , Humans , Female , Peru/epidemiology , Hemoglobins/analysis , Anemia/diagnosis , Hemoglobinometry , FerritinsABSTRACT
Peru is one of the countries with the highest lead contamination in the world. Biological monitoring has limitations due to the shortage of laboratories with validated methodologies for the measurement of blood lead, and it is necessary to use alternative methods for its measurement in high-altitude cities. We aimed to compare the blood lead levels (BLL) measured by the LeadCare II (LC) method and Graphite Furnace Atomic Absorption Spectrometry (GF-AAS). We measured the BLL of 108 children from the city of La Oroya. The mean and median BLL for GF-AAS were 10.77 ± 4.18 and 10.44 µg/dL, respectively; for the LC method, the mean was 11.71 ± 4.28 and the median was 11.60 µg/dL. We found a positive linear correlation (Rho = 0.923) between both methods. Notwithstanding, the Wilcoxon test suggests a significant difference between both methods (ρ = 0.000). In addition, the Bland-Altman analysis indicates that there is a positive bias (0.94) in the LC method, and this method tends to overestimate the BLL. Likewise, we performed a generalized linear model to evaluate the influence of age and hemoglobin on BLL. We found that age and hemoglobin had a significant influence on BLL measured by the LC method. Finally, we used two non-parametric linear regression methods (Deming and Passing-Bablok regression) to compare the LC method with the GF-AAS. We found that these methods differ by at least a constant amount, and there would be a proportional difference between both. Although in general there is a positive linear correlation, the results of both methods differ significantly. Therefore, its use in cities located at high altitudes (higher than 2440 m.a.s.l.) would not be recommended.
ABSTRACT
Background: Sputum smear microscopy (SSM) is a screening test used to diagnose tuberculosis (TB); however, its performance and sensitivity are relatively low, which can lead to false negatives. We designed a cross-sectional study to estimate the performance of SSM that includes a pretreatment based on sputum digestion with bleach (sodium hypochlorite) for the diagnosis of TB. Methods: We evaluated 73 sputum samples from patients with a diagnosis of TB confirmed by the Xpert MTB/RIF test and 114 samples from patients without TB. We performed sputum digestion using a 5% sodium hypochlorite solution, centrifuged at 2000 rpm for 15 min. We prepared smears for direct and bleach-treated SSM and used Ziehl−Neelsen staining. Results: The bleach-treated SSM obtained absolute identification of the cases of TB confirmed by the Xpert test, compared to 95.9% identified by the direct smear method (without bleach treatment). We also found a significant increase (p < 0.001) in the recovery of acid-fast bacilli (AFB) obtained by the bleach-treated SSM (293.8 ± 215.1 AFB) compared to the direct SSM method (222.9 ± 195.5 AFB). The AUC of the bleach-treated SSM and direct SSM was 100% and 96.6%, respectively. Conclusion: The bleach-treated SSM performs better than the direct SSM in identifying AFB and increasing the bacillary count in the sputum samples.
Subject(s)
Mycobacterium tuberculosis , Tuberculosis, Pulmonary , Tuberculosis , Humans , Microscopy/methods , Tuberculosis, Pulmonary/diagnosis , Tuberculosis, Pulmonary/epidemiology , Sodium Hypochlorite , Sputum , Peru/epidemiology , Cross-Sectional Studies , Tuberculosis/diagnosis , Tuberculosis/epidemiology , Sensitivity and SpecificityABSTRACT
OBJECTIVE: To develop a methodology for evaluating the level of respiratory protection provided by respirators, surgical masks and community face masks used by the Peruvian population; protection was evaluated against particles of a size similar to those containing active SARS-CoV-2 virus. MATERIALS AND METHODS: A direct linear relationship has been determined between the logarithm of the concentration of airborne particles and the elapsed time; thus, it is possible to compare the quantity of particles inside and outside of the mask or respirator in the same time period, as well as to obtain the percentage of respiratory protection for each evaluated sample. RESULTS: A methodology was established to evaluate the level of respiratory protection against aerosols smaller than 5.0 µm. Also, the use of accessories such as rubber bands or adjusters behind the head and neck, and the use of robust nasal clips, significantly increased the level of respiratory protection against particles with a high probability of containing SARS-CoV-2. CONCLUSIONS: We found concordance between the obtained respiratory protection values and those expected, considering the filtration level of the material used for each surgical mask or respirator, as well as the tightness. A significant increase in the levels of respiratory protection was observed.
OBJETIVO: Desarrollar una metodología para evaluar el nivel de protección respiratoria de respiradores, mascarillas quirúrgicas y mascarillas comunitarias que usa la población peruana, usando partículas de un tamaño similar a las que contienen al virus activo del SARS-CoV-2. MATERIALES Y MÉTODOS: Se ha determinado una relación lineal directa entre el logaritmo de la concentración de partículas suspendidas en aire y el tiempo transcurrido; por lo cual es posible comparar la cantidad de partículas internas y externas a la mascarilla o respirador en un mismo periodo y conocer el porcentaje de protección respiratoria de cada muestra evaluada. RESULTADOS: Se ha logrado implementar una metodología para evaluar el nivel de protección respiratoria ante aerosoles menores a 5,0 µm. Asimismo, el empleo de accesorios como ligas o ajustadores detrás de cabeza y nuca, y el uso de clips nasales robustos, incrementan significativamente el nivel de protección respiratoria ante partículas con alta probabilidad de contener al SARS-CoV-2. CONCLUSIONES: Se observa una concordancia entre los valores de protección respiratoria obtenidos y los esperados, considerando el nivel de filtración del material empleado de cada mascarilla quirúrgica o respirador, y su nivel de ajuste. Se observó un incremento significativo en los niveles de protección respiratoria.
Subject(s)
COVID-19 , Masks , Aerosols , Humans , SARS-CoV-2 , Ventilators, MechanicalABSTRACT
RESUMEN Objetivo: Desarrollar una metodología para evaluar el nivel de protección respiratoria de respiradores, mascarillas quirúrgicas y mascarillas comunitarias que usa la población peruana, usando partículas de un tamaño similar a las que contienen al virus activo del SARS-CoV-2. Materiales y métodos: Se ha determinado una relación lineal directa entre el logaritmo de la concentración de partículas suspendidas en aire y el tiempo transcurrido; por lo cual es posible comparar la cantidad de partículas internas y externas a la mascarilla o respirador en un mismo periodo y conocer el porcentaje de protección respiratoria de cada muestra evaluada. Resultados: Se ha logrado implementar una metodología para evaluar el nivel de protección respiratoria ante aerosoles menores a 5,0 µm. Asimismo, el empleo de accesorios como ligas o ajustadores detrás de cabeza y nuca, y el uso de clips nasales robustos, incrementan significativamente el nivel de protección respiratoria ante partículas con alta probabilidad de contener al SARS-CoV-2. Conclusiones: Se observa una concordancia entre los valores de protección respiratoria obtenidos y los esperados, considerando el nivel de filtración del material empleado de cada mascarilla quirúrgica o respirador, y su nivel de ajuste. Se observó un incremento significativo en los niveles de protección respiratoria.
ABSTRACT Objective: To develop a methodology for evaluating the level of respiratory protection provided by respirators, surgical masks and community face masks used by the Peruvian population; protection was evaluated against particles of a size similar to those containing active SARS-CoV-2 virus. Materials and methods: A direct linear relationship has been determined between the logarithm of the concentration of airborne particles and the elapsed time; thus, it is possible to compare the quantity of particles inside and outside of the mask or respirator in the same time period, as well as to obtain the percentage of respiratory protection for each evaluated sample. Results: A methodology was established to evaluate the level of respiratory protection against aerosols smaller than 5.0 μm. Also, the use of accessories such as rubber bands or adjusters behind the head and neck, and the use of robust nasal clips, significantly increased the level of respiratory protection against particles with a high probability of containing SARS-CoV-2. Conclusions: We found concordance between the obtained respiratory protection values and those expected, considering the filtration level of the material used for each surgical mask or respirator, as well as the tightness. A significant increase in the levels of respiratory protection was observed.
