Intrathecal dexamethasone as an adjuvant for spinal anesthesia: a systematic review.

INTRODUCTION: Spinal anesthesia is a common anesthetic technique for lower limb and abdominal surgery. Despite its efficacy, its use is limited because of its duration and potential severe side effects, especially in high-risk patients undergoing major surgery. Adjuvants such as dexamethasone offer the potential to prolong the anesthetic effect and reduce the need for local anesthetics while reducing the incidence of serious adverse events. The purpose of this systematic review is to evaluate the efficacy of dexamethasone as an intrathecal adjuvant in prolonging anesthetic duration, delaying pain onset, and minimizing adverse events (PROSPERO registration: CRD42022350218). EVIDENCE ACQUISITION: We included randomized controlled trials conducted in adult patients undergoing spinal anesthesia for lower limb or abdominal surgery and comparing the performance of dexamethasone with alternative spinal treatments. A comprehensive systematic search was conducted on PubMed/MEDLINE, Scopus, CINAHL, EMBASE, CENTRAL, and Cochrane Library from February to June 2023 without language restriction. Risk of bias was assessed using the Cochrane Risk of Bias Tool (RoB2). EVIDENCE SYNTHESIS: Ten studies, nine of which were at high risk of bias, were included (N.=685 patients). Overall, intrathecal dexamethasone was associated with a longer duration of sensory block, improvement in the duration or extent of postoperative analgesia, and significant shortening of block onset. The role of dexamethasone in prolonging motor block was not clear. The incidence of adverse events was low. Intrathecal dexamethasone has been shown to be a potentially valuable adjuvant to prolong the duration of sensory block and improve postoperative analgesia without increasing adverse events. CONCLUSIONS: Given the wide heterogeneity of methodological approaches, further investigation is needed. Considering the limitations of the included studies and awaiting more conclusive evidence, the prudent use of dexamethasone could be recommended in those specific situations where general anesthesia or higher local anesthetics should be avoided.

Rectus sheath block added to parasternal block may improve postoperative pain control and respiratory performance after cardiac surgery: a superiority single-blinded randomized controlled clinical trial.

BACKGROUND: The population undergoing cardiac surgery confronts challenges from uncontrolled post-sternotomy pain, with possible adverse effects on outcome. While the parasternal block can improve analgesia, its coverage may be insufficient to cover epigastric area. In this non-blinded randomized controlled study, we evaluated the analgesic and respiratory effect of adding a rectus sheath block to a parasternal block. METHODS: 58 patients undergoing cardiac surgery via median sternotomy were randomly assigned to receive parasternal block with rectus sheath block (experimental) or parasternal block with epigastric exit sites of chest drains receiving surgical infiltration of local anesthetic (control). The primary outcome of this study was pain at rest at extubation. We also assessed pain scores at rest and during respiratory exercises, opiate consumption and respiratory performance during the first 24 hours after extubation. RESULTS: The median (IQR) maximum pain scores (on a 0-10 Numeric Rate Scale (NRS)) at extubation were 4 (4, 4) in the rectus sheath group and 5 (4, 5) in the control group (difference 1, p value=0.03). Rectus sheath block reduced opioid utilization by 2 mg over 24 hours (IC 95% 0.0 to 2.0; p<0.01), reduced NRS scores at other time points, and improved respiratory performance at 6, 12, and 24 hours after extubation. CONCLUSION: The addition of a rectus sheath block with a parasternal block improves analgesia for cardiac surgery requiring chest drains emerging in the epigastric area. TRIAL REGISTRATION NUMBER: NCT05764616.

2D materials for Tribo-corrosion and -oxidation protection: A review.

The recent rise of 2D materials has extended the opportunities of tuning a variety of properties. Tribo-corrosion, the complex synergy between mechanical wear and chemical corrosion, poses significant challenges across numerous industries where materials are subjected to both tribological stressing and corrosive environments. This intricate interplay often leads to accelerated material degradation and failure. This review critically assesses the current state of utilizing 2D nanomaterials to enhance tribo-corrosion and -oxidation behavior. The paper summarizes the fundamental knowledge about tribo-corrosion and -oxidation mechanisms before assessing the key contributions of 2D materials, including graphene, transition metal chalcogenides, hexagonal boron nitride, MXenes, and black phosphorous, regarding the resulting friction and wear behavior. The protective roles of these nanomaterials against corrosion and oxidation are investigated, highlighting their potential in mitigating material degradation. Furthermore, we delve into the nuanced interplay between mechanical and corrosive factors in the specific application of 2D materials for tribo-corrosion and -oxidation protection. The synthesis of key findings underscores the advancements achieved through integrating 2D nanomaterials. An outlook for future research directions is provided, identifying unexplored avenues, and proposing strategies to propel the field forward. This analysis aims at guiding future investigations and developments at the dynamic intersection of 2D nanomaterials, tribo-corrosion, and -oxidation protection.

Lateral Femoral Cutaneous Nerve Block or Wound Infiltration Combined with Pericapsular Nerve Group (PENG) Block for Postoperative Analgesia following Total Hip Arthroplasty through Posterior Approach: A Randomized Controlled Trial.

Background: Pericapsular nerve group (PENG) block, although effective for pain management following total hip arthroplasty (THA), does not cover skin analgesia. In this randomized controlled trial, we compared the effectiveness of PENG block combined with lateral femoral cutaneous nerve (LFCN) block or wound infiltration (WI) on postoperative analgesia and functional outcomes. Methods: Fifty patients undergoing posterior-approached THA under spinal anesthesia were randomly allocated to receive LFCN block with 10 mL of 0.5% ropivacaine or WI with 20 mL of 0.5% ropivacaine. In both groups, PENG block was performed by injecting 20 mL of 0.5% ropivacaine. Primary outcomes were static and dynamic pain scores (0-10 numeric rating scale) measured in the first 24 h after surgery. Secondary outcomes included postoperative opioid consumption, functional assessment and length of hospital stay. Results: Postoperative static NRS of patients receiving LFCN was higher than that of patients receiving WI at 6 h but lower at 24 h, with a median (IQR) of 3 (2-4) vs. 2 (1-2) (p < 0.001) and 2 (2-3) vs. 3 (3-4) (p = 0.02), respectively. Static pain scores at 12 h did not show significant differences, with an NRS of 3 (2-4) for WI vs. 3 (3-4) for LFCN (p = 0.94). Dynamic pain and range of movement followed a similar trend. No significant differences were detected in other outcomes. Conclusions: LFCN block was not inferior to WI for postoperative analgesia and functional recovery in association with PENG block during the first postoperative day, although it had worse short-term pain scores. Based on these results, it is reasonable to consider LFCN block as a valid alternative to WI or even a complementary technique added to WI to enhance skin analgesia during the first 24 h after THA. Future studies are expected to confirm this hypothesis and find the best combination between PENG block and other techniques to enhance analgesia after THA.

Laparoscopic-Guided Transversus Abdominis Plane (TAP) Block Combined with Port-Site Infiltration (PSI) for Laparoscopic Sleeve Gastrectomy in an ERABS Pathway: A Randomized, Prospective, Double-Blind, Placebo-Controlled Trial.

PURPOSE: Patients undergoing laparoscopic sleeve gastrectomy (LSG) commonly experience moderate to severe postoperative pain. We conducted a randomized, prospective double-blind placebo-controlled study to evaluate the analgesic effect of laparoscopic-guided TAP (LG-TAP) block after LSG in a high-volume bariatric center, applying an enhanced recovery after bariatric surgery (ERABS) pathway. MATERIAL AND METHODS: One hundred ten patients were randomly allocated to receive LG-TAP block with local anesthetic (LA) or saline solution (placebo), both combined with port-site infiltration with LA (LA-PSI). Primary outcome was pain score measured in post-anesthesia care unit (PACU) and at 6, 12, and 24 h after surgery. Secondary outcomes included postoperative nausea and/or vomiting (PONV), analgesic requirement, time to walking, time to flatus, length of hospital stay (LOS), and surgical complications. RESULTS: No significant differences were observed between LG-TAP and placebo groups in postoperative analgesia, with a median (IQR) NRS of 2 (4.75-0) vs. 2 (5.25-0) in PACU, 5.5 (7-3) vs. 6 (7-4) at 6 h, 2 (6-0) vs. 3 (5.25-1.75) at 12 h, and 2 (3.75-0) vs. 1 (2-0) at 24 h; all p > 0.05. A significant difference was found in PONV in PACU (LG-TAP, 46%; placebo, 25%, p-value, 0.019) and at 6 h postoperatively (LG-TAP, 69%, placebo, 41%, p-value, 0.003). No differences were observed as regards other secondary outcomes. CONCLUSION: Our results suggest that LG-TAP block is not related to more effective postoperative analgesia compared to placebo when LA-PSI is performed.

Tribocorrosion of 3D printed dental implants: An overview.

With the advancements in dental science and the growing need for improved dental health, it has become imperative to develop new implant materials which possess better geometrical, mechanical, and physical properties. The oral environment is a corrosive environment and the relative motion between the teeth also makes the environment more hostile. Therefore, the combined corrosion and tribology commonly known as tribocorrosion of implants needs to be studied. The complex shapes of the dental implants and the high-performance requirements of these implants make manufacturing difficult by conventional manufacturing processes. With the advent of additive manufacturing or 3D-printing, the development of implants has become easy. However, the various requirements such as surface roughness, mechanical strength, and corrosion resistance further make the manufacturing of implants difficult. The current paper reviews the various studies related to3D-printed implants. Also, the paper tries to highlight the role of 3D-Printing can play in the area of dental implants. Further studies both experimental and numerical are needed to devise optimized conditions for 3D-printing implants to develop implants with improved mechanical, corrosion, and biological properties.

Deep Learning-based Segmentation of CT Scans Predicts Disease Progression and Mortality in IPF.

RATIONALE: Despite evidence demonstrating a prognostic role for CT scans in IPF, image-based biomarkers are not routinely used in clinical practice or trials. OBJECTIVES: Develop automated imaging biomarkers using deep learning based segmentation of CT scans. METHODS: We developed segmentation processes for four anatomical biomarkers which were applied to a unique cohort of treatment-naive IPF patients enrolled in the PROFILE study and tested against a further UK cohort. The relationship between CT biomarkers, lung function, disease progression and mortality were assessed. MEASUREMENTS AND MAIN RESULTS: Data was analysed from 446 PROFILE patients. Median follow-up was 39.1 months (IQR 18.1-66.4) with cumulative incidence of death of 277 over 5 years (62.1%). Segmentation was successful on 97.8% of all scans, across multiple imaging vendors at slice thicknesses 0.5-5mm. Of 4 segmentations, lung volume showed strongest correlation with FVC (r=0.82, p<0.001). Lung, vascular and fibrosis volumes were consistently associated across cohorts with differential five-year survival, which persisted after adjustment for baseline GAP score. Lower lung volume (HR 0.98, CI 0.96-0.99, p=0.001), increased vascular volume (HR 1.30, CI 1.12-1.51, p=0.001) and increased fibrosis volume (HR 1.17, CI 1.12-1.22, p=<0.001) were associated with reduced two-year progression-free survival in the pooled PROFILE cohort. Longitudinally, decreasing lung volume (HR 3.41; 95% CI 1.36-8.54; p=0.009) and increasing fibrosis volume (HR 2.23; 95% CI 1.22-4.08; p=0.009) were associated with differential survival. CONCLUSIONS: Automated models can rapidly segment IPF CT scans, providing prognostic near and long-term information, which could be used in routine clinical practice or as key trial endpoints. This article is open access and distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/).

Interventional treatments for low back pain due to sacroiliac joint dysfunction: a systematic review of the literature.

PURPOSE: This systematic review aimed to report the current evidence in the literature about the efficacy of interventional treatments in the management of low back pain (LBP) due to sacroiliac joint dysfunction. METHODS: A systematic review was performed using the Preferred Reporting Items for Systematic Reviews and Meta-analyses (PRISMA) guidelines. Medline, EMBASE, Scopus, CINAHL, Cochrane Library, and CENTRAL bibliographic databases were searched. The search was performed from October to December 2021, and articles from the inception of the database to December 2021 were searched. RESULTS: Fourteen studies were included for qualitative synthesis. Five studies used the traditional radiofrequency approach (tRF), five studies used cooled radiofrequency approach (cRF), one study used botulinum toxin (BT), two studies used steroid injection, triamcinolone (TA) and local anesthetics injections, and one study used pulsed radiofrequency (PRF) denervation. Two studies used sham as a comparator. CONCLUSIONS: Cooled radiofrequency seems to be the most effective treatment in improving pain and functionality, while intra-articular injections are helpful only as diagnostic tools. However, due to the lack of high-quality studies, it was not possible to draw significant conclusions.

Stress-strain and fatigue life numerical evaluation of two different dental implants considering isotropic and anisotropic human jaw.

Dental prostheses are currently a valid solution for replacing potential missing tooth or edentulism clinical condition. Nevertheless, the oral cavity is a dynamic and complex system: occlusal loads, external agents, or other unpleasant events can impact on implants functionality and stability causing a future revision surgery. One of the failure origins is certainly the dynamic loading originated from daily oral activities like eating, chewing, and so on. The aim of this paper was to evaluate, by a numerical analysis based on Finite Elements Method (FEM), and to discuss in a comparative way, firstly, the stress-strain of two different adopted dental implants and, subsequently, their fatigue life according to common standard of calculations. For this investigation, the jawbone was modeled accounting for either isotropic or anisotropic behavior. It was composed of cortical and cancellous regions, considering it completely osseointegrated with the implants. The impact of implants' fixture design, loading conditions, and their effect on the mandible bone was finally investigated, on the basis of the achieved numerical results. Lastly, the life cycle of the investigated implants was estimated according to the well-established theories of Goodman, Soderberg, and Gerber by exploiting the outcomes obtained by the numerical simulations, providing interesting conclusions useful in the dental practice.

Natural history of chronic thromboembolic pulmonary disease with no or mild pulmonary hypertension.

BACKGROUND: We describe baseline characteristics, disease progression and mortality in chronic thromboembolic pulmonary disease patients as a function of mean pulmonary artery pressure (mPAP) according to new and previous definitions of pulmonary hypertension. METHODS: All patients diagnosed with chronic thromboembolic pulmonary disease between January, 2015 and December, 2019 were dichotomized according to initial mPAP: ≤ 20 mmHg ('normal') vs 21-24 mmHg ('mildly-elevated'). Baseline features were compared between the groups, and pairwise analysis performed to determine changes in clinical endpoints at 1-year, excluding those who underwent pulmonary endarterectomy or did not attend follow-up. Mortality was assessed for the whole cohort over the entire study period. RESULTS: One hundred thirteen patients were included; 57 had mPAP ≤ 20 mmHg and 56 had mPAP 21-24 mmHg. Normal mPAP patients had lower pulmonary vascular resistance (1.6 vs 2.5WU, p < 0.01) and right ventricular end-diastolic pressure (5.9 vs 7.8 mmHg, p < 0.01) at presentation. At 3 years, no major deterioration was seen in either group. No patients were treated with pulmonary artery vasodilators. Eight had undergone pulmonary endarterectomy. Over 37 months median follow-up, mortality was 7.0% in the normal mPAP group and 8.9% in the mildly-elevated mPAP group. Cause of death was malignancy in 62.5% of cases. CONCLUSIONS: Chronic thromboembolic pulmonary disease patients with mild pulmonary hypertension have statistically higher right ventricular end-diastolic pressure and pulmonary vascular resistance than those with mPAP ≤ 20 mmHg. Baseline characteristics were otherwise similar. Neither group displayed disease progression on non-invasive tests up to 3 years. Mortality over 37 months follow-up is 8%, and mainly attributable to malignancy. Further prospective study is required to validate these findings.

Mandibular Reconstruction after Resection of Ameloblastoma by Custom-Made CAD/CAM Mandibular Titanium Prosthesis: Two Case Reports, Finite Element Analysis and Discussion of the Technique.

Virtual surgical planning for CAD/CAM mandibular reconstruction by titanium prosthesis was recently reported for resected cases. Even if some advantages are evident, difficulties that may arise for TMJ function after reconstruction originate from prosthesis contamination through oral mucosa dehiscence. In these two cases reported of mandibular reconstruction after resection of ameloblastoma by custom-made CAD/CAM titanium prosthesis, the procedures were aimed to preserve the TMJ glenoid cavity and articular disc avoiding functional problems for hemi-mandibular resections that included the condyle (as in case #1) or with condylar preservation (as in case #2) and avoiding intraoral incisions in both cases. The entire surgical planning and prosthetic fabrication were explained with specifications and the sequence of the surgical procedure. Finite elements analysis (FEA) was performed to check the force distribution and efficacy of the prosthetic device (case 1 with hemi-mandibular resection and rehabilitation). Although successful in these two cases, surgical reconstruction of the mandibular defect after resection by a CAD-CAM custom-made prosthesis still shows some drawbacks and failure risks. Several advantages of this technique and the surgical success in these two cases were presented, but limitations and side effects must be considered when cases are selected.

Ultrasound predictors of difficult spinal anesthesia: a prospective single-blind observational study.

BACKGROUND: Ultrasound showed to improve the precision and efficacy of spinal anesthesia (SA) through the identification of specific structures surrounding the intrathecal space, such as the anterior and posterior complex of dura mater (DM). The aim of this study was to verify the efficacy of ultrasonography in predicting difficult SA trough the analysis of different ultrasound patterns. METHODS: This prospective single-blind observational study involved 100 patients undergoing orthopedic or urological surgery. A first operator chose by landmarks the intervertebral space where he wanted to perform SA. Then a second operator recorded the visibility of DM complexes at ultrasound. Subsequently, the first operator, blinded to the ultrasound evaluation, performed SA, defined as "difficult" in case of failure, change of intervertebral space, operator exchange, duration >400 seconds or more than 10 needle passes. RESULTS: The ultrasound visualization of only posterior complex or the failure in visualization of both complexes showed a positive predictive value of 76% and 100%, respectively, towards difficult SA vs. 6% when both complexes were visible; P<0.001. A negative correlation was found between the number of visible complexes and both patients' age and BMI. Landmark-guided evaluation underestimated the intervertebral level in 30% of cases. CONCLUSIONS: Ultrasound showed a high accuracy in detecting difficult spinal anesthesia and its use should be recommended in the daily clinical practice in order to increase success rate and minimize patient discomfort. The absence of both DM complexes at ultrasound should lead the anesthetist to evaluate other intervertebral levels or consider alternative techniques.

Interventional Minimally Invasive Treatments for Chronic Low Back Pain Caused by Lumbar Facet Joint Syndrome: A Systematic Review.

STUDY DESIGN: Systematic review. OBJECTIVE: To investigate the efficacy of nonsurgical interventional treatments for chronic low back pain (LBP) caused by facet joint syndrome (FJS). METHODS: A systematic review of the literature was conducted to identify studies that compared interventional treatments for LBP due to FJS among them, with usual care or sham procedures. Studies were evaluated for pain, physical function, disability, quality of life and employment status. The RoB-2 and MINORS tools were utilized to assess the risk of bias in included studies. RESULTS: Eighteen studies published between January 2000 and December 2021 were included (1496 patients, mean age: 54.31 years old). Intraarticular (IA) facet joint (FJ) injection of hyaluronic acid (HA) did not show significant difference compared to IA corticosteroids (CCS) in terms of pain and satisfaction. FJ denervation using radiofrequency (RF) displayed slightly superior or similar outcomes compared to IA CCS, physical therapy, or sham procedure. IA CCS showed better outcomes when combined with oral diclofenac compared to IA CCS or oral diclofenac alone but was not superior to IA local anesthetic and Sarapin. IA platelet-rich plasma (PRP) led to an improvement of pain, disability and satisfaction in the long term compared to IA CCS. CONCLUSION: FJS is a common cause of LBP that can be managed with several different strategies, including nonsurgical minimally invasive approaches such as IA HA, CCS, PRP and FJ denervation. However, available evidence showed mixed results, with overall little short-term or no benefits on pain, disability, and other investigated outcomes.

Acute lung injury after balloon pulmonary angioplasty results in a similar haemodynamic response and possible clinical advantage at follow-up.

Acute lung injury (ALI) is a common but poorly defined and understood complication of balloon pulmonary angioplasty (BPA) for chronic thromboembolic pulmonary hypertension (CTEPH). Little data are available on the medium term clinical outcomes of BPA complicated by ALI. We analyzed per-procedure data from 282 procedures in 109 patients and per-patient data from 85 patients. Serial right heart catheterization at baseline, after each BPA and at 3-month follow-up measured pulmonary vascular resistance (PVR), mean pulmonary artery pressure (mPAP), and cardiac output (CO). ALI (ALI+) was identified by chest radiography alone (ALIr+) or in association with hypoxia clinically (ALIcr+). Procedural predictors of ALI and patient outcomes at 3-months were compared no ALI (ALI-). ALI+ occurred in 17/282 (6.0%) procedures (ALIcr+: 2.5%, ALIr+: 3.5%). Prevailing haemodynamics (PVR: p < 0.01; mPAP: p < 0.05) at a procedural and patient level, as well as number of BPA sessions (p < 0.01), total number of vessels (p < 0.05), and occlusions (p < 0.05) treated at a patient level predicted ALI+. Those with ALI had greater percentage improvement in ΔCAMPHOR symptoms score (ALI+: -63.5 ± 35.7% (p < 0.05); ALIcr+: -84.4 ± 14.5% (p < 0.01); ALI-: -27.2 ± 74.2%) and ΔNT-proBNP (ALIcr+: -78.4 ± 11.9% (p < 0.01); ALI-: -42.9 ± 36.0%) at follow-up. There was no net significant difference in haemodynamic changes in ALI+ versus ALI- at follow-up. ALI is predicted by haemodynamic severity, number of vessels treated, number of BPA sessions, and treating occlusive disease. ALI in this cohort was associated with a clinical advantage at follow-up.