Low-Intensity Light Detection with a High Detectivity Using 2D-Sb2Se3 Nanoflakes on 1D-ZnO Nanorods as Heterojunction Photodetectors.

Multifunctional photodetectors (PDs) with broadband responsivity (R) and specific detectivity (D*) at low light intensities are gaining significant attention. Thus, we report a bilayer PD creatively fabricated by layering two-dimensional (2D) Sb2Se3 nanoflakes (NFs) on one-dimensional (1D) ZnO nanorods (NRs) using simple thermal transfer and hydrothermal processes. The unique coupling of these two layers of materials in a nanostructured form, such as 2D-Sb2Se3 NFs/1D-ZnO NRs, provides an effective large surface area, robust charge transport paths, and light-trapping effects that enhance light harvesting. Furthermore, the combination of both layers can effectively facilitate photoactivity owing to proper band alignment. The as-fabricated device demonstrated superior overall performance in terms of a suitable bandwidth, good R, and high D* under low-intensity light, unlike the single-layered 1D-ZnO NRs and 2D-Sb2Se3 NF structures alone, which had poor detectivity or response in the measured spectral range. The PD demonstrated a spectral photoresponse ranging from ultraviolet (UV) to visible (220-628 nm) light at intensities as low as 0.15 mW·cm-2. The PD yielded a D* value of 3.15 × 1013 Jones (220 nm), which reached up to 5.95 × 1013 Jones in the visible light region (628 nm) at a 3 V bias. This study demonstrated that the 2D-Sb2Se3 NFs/1D-ZnO NRs PD has excellent potential for low-intensity light detection with a broad bandwidth, which is useful for signal communications and optoelectronic systems.

Multilevel resistive switching in hydrothermally synthesized FeWO4 thin film-based memristive device for non-volatile memory application.

The memristors offer significant advantages as a key element in non-volatile and brain-inspired neuromorphic systems because of their salient features such as remarkable endurance, ability to store multiple bits, fast operation speed, and extremely low energy usage. This work reports the resistive switching (RS) characteristics of the hydrothermally synthesized iron tungstate (FeWO4) based thin film memristive device. The detailed physicochemical analysis was investigated using Rietveld's refinement, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM) techniques. The fabricated Ag/FWO/FTO memristive device exhibits bipolar resistive switching (BRS) behavior. In addition, the devices exhibit negative differential resistance (NDR) at both positive and negative bias. The charge-flux relation portrayed the non-ideal or memristive nature of the devices. The reliability in the RS process was analyzed in detail using Weibull distribution and time series analysis techniques. The device exhibits stable and multilevel endurance and retention characteristics which demonstrates the suitability of the device for the high-density non-volatile memory application. The current conduction of the device was dominated by Ohmic and trap controlled-space charge limited current (TC-SCLC) mechanisms and filamentary RS process responsible for the BRS in the device. In a nutshell, the present investigations reveal the potential use of the iron tungstate for the fabrication of memristive devices for the non-volatile memory application.

Cationic and anionic cross-assisted synergistic photocatalytic removal of binary organic dye mixture using Ni-doped perovskite oxide.

Organic dyes present in industrial wastewater are the major contributor to water pollution, which harm human health and the environment. Photocatalytic dye degradation is an effective strategy for water remediation by converting these organic dyes waste into non-harmful by-products. Therefore, in this study, Ni-doped LaFeO3 (NLFO) perovskite nanoparticles were extensively explored for photocatalytic degradation of cationic and anionic dyes and their mixture. The NLFO nanoparticles were successfully synthesized by surfactant assisted hydrothermal method under controlled Ni doping. The X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) revealed the variation in size (40-70 nm) of orthorhombic crystalline LFO nanoparticles with Ni doping and hence the size of microspheres (0.78. to 1.78 µm). The kinetic studies revealed that the LaFe0·6Ni0·4O3 performed well by providing degradation efficiency of 99.2% in 210 min, 99.1% in 100 min, and 98.4% in 70 min for Crystal Violet (CV), Congo Red (CR), and their mixture with rate constant of 0.019, 0.039, and 0.055 min-1 respectively. The radical scavenger tests indicated the synergetic contributions of O2- and •OH- active radicals in faster degradation of CV and CR dye mixture. The stepwise fragmentation of dye molecule during the photocatalytic degradation identified from the LCMS indicates the degradation of CV dye through de-alkylation and benzene ring breaking, whereas azo bond cleavage and oxidation lead to low molecular weight intermediates for CR dye, which all together helped to degrade their dye mixture (50 mg L-1 and 100 mg L-1) in significantly lesser time (70 min). Overall, the Ni-doped LFO microsphere consisting of nanoparticles acts as a superior catalyst for the more efficient and faster degradation of binary dye mixture.

Porous nanorods by stacked NiO nanoparticulate exhibiting corn-like structure for sustainable environmental and energy applications.

A porous 1D nanostructure provides much shorter electron transport pathways, thereby helping to improve the life cycle of the device and overcome poor ionic and electronic conductivity, interfacial impedance between electrode-electrolyte interface, and low volumetric energy density. In view of this, we report on the feasibility of 1D porous NiO nanorods comprising interlocked NiO nanoparticles as an active electrode for capturing greenhouse CO2, effective supercapacitors, and efficient electrocatalytic water-splitting applications. The nanorods with a size less than 100 nm were formed by stacking cubic crystalline NiO nanoparticles with dimensions less than 10 nm, providing the necessary porosity. The existence of Ni2+ and its octahedral coordination with O2- is corroborated by XPS and EXAFS. The SAXS profile and BET analysis showed 84.731 m2 g-1 surface area for the porous NiO nanorods. The NiO nanorods provided significant surface-area and the active-surface-sites thus yielded a CO2 uptake of 63 mmol g-1 at 273 K via physisorption, a specific-capacitance (CS) of 368 F g-1, along with a retention of 76.84% after 2500 cycles, and worthy electrocatalytic water splitting with an overpotential of 345 and 441 mV for HER and OER activities, respectively. Therefore, the porous 1D NiO as an active electrode shows multifunctionality toward sustainable environmental and energy applications.

Structural, morphological, and photoluminescence properties of RE (RE = Dy3+ , Eu3+ , Sm3+ )-doped CaAlBO4 phosphor synthesized by combustion method.

The CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor were prepared via combustion synthesis and studied by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectra and CIE coordinates. The phase formation of the obtained phosphor was analyzed by XRD and the result was confirmed by standard PDF Card No. 1539083. XRD data successfully indicated pure phase of CaAlBO4 phosphor. The crystal structure of CaAlBO4 phosphor is orthorhombic with space group Ccc2 (37). The SEM image of CaAlBO4 phosphor reveals an agglomerated morphology and non-uniform particle size. The EDS image provides evidence of the elements present and the chemical makeup of the materials. Under the 350 nm excitation, the emission spectrum of Dy3+ activated CaAlBO4 phosphor consists of two main groups of characteristic peaks located at 484 and 577 nm which are ascribed to 4 F9/2 → 6 H15/2 and 4 F9/2 → 6 H13/2 transition of Dy3+ respectively. The PL emission spectra of CaAlBO4 :Eu3+ phosphor shows characteristics bands observed around 591 and 613 nm, which corresponds to 5 D0 → 7 F1 and 5 D0 → 7 F2 transition of Eu3+ respectively, upon 395 nm excitation wavelength. The emission spectra of Sm3+ activated CaAlBO4 phosphor shows three characteristic bands observed at 565, 601 and 648 nm which emits yellow, orange and red color. The prominent emission peak at the wavelength 601 nm, which is attributed to 4 G5/2 → 6 H7/2 transition, displays an orange emission. The CIE color coordinates of CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor are calculated to be (0.631, 0.368), (0.674, 0.325) and (0.073, 0.185). As per the obtained results, CaAlBO4 :RE (RE = Dy3+ , Eu3+ , Sm3+ ) phosphor may be applicable in eco-friendly lightning technology.

Visible light assisted surface plasmon resonance triggered Ag/ZnO nanocomposites: synthesis and performance towards degradation of indigo carmine dye.

Water pollution caused by organic compounds, generated from different industries, has gained attention worldwide today. In this regard, significant efforts have been made for a suitable dye degradation technology. Zinc oxide (ZnO)-based photocatalysts are considered novel materials to degrade organic effluents in contaminated water. The facile synthesis of Ag/ZnO nanocomposites and its application for the enhanced degradation of indigo carmine (IC) dye under visible light irradiation is reported in this paper. The prepared photocatalysts were characterized using various analytical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron (XPS) spectroscopy, FTIR, Raman, impedance study, UV-Vis, and photoluminescence (PL). Prepared Ag/ZnO nanocomposites were tested for degradation of IC dye in visible light. The degradation efficiency of IC dye was found to be 95.71% in 120 min, with a rate constant of 0.02021 min-1. This improved photocatalytic activity of Ag/ZnO nanocomposites was mainly due to the absorption of visible light caused by surface plasmon resonance (SPR) derived from Ag nanoparticles (NPs) and electron-hole separation. Radical trapping experiments suggest that holes (h+) and superoxide radical (O2•-) are the key factors in photocatalytic IC dye degradation.

A GATA4-regulated secretory program suppresses tumors through recruitment of cytotoxic CD8 T cells.

The GATA4 transcription factor acts as a master regulator of development of multiple tissues. GATA4 also acts in a distinct capacity to control a stress-inducible pro-inflammatory secretory program that is associated with senescence, a potent tumor suppression mechanism, but also operates in non-senescent contexts such as tumorigenesis. This secretory pathway is composed of chemokines, cytokines, growth factors, and proteases. Since GATA4 is deleted or epigenetically silenced in cancer, here we examine the role of GATA4 in tumorigenesis in mouse models through both loss-of-function and overexpression experiments. We find that GATA4 promotes non-cell autonomous tumor suppression in multiple model systems. Mechanistically, we show that Gata4-dependent tumor suppression requires cytotoxic CD8 T cells and partially requires the secreted chemokine CCL2. Analysis of transcriptome data in human tumors reveals reduced lymphocyte infiltration in GATA4-deficient tumors, consistent with our murine data. Notably, activation of the GATA4-dependent secretory program combined with an anti-PD-1 antibody robustly abrogates tumor growth in vivo.

The adaptive immune system is a major driver of selection for tumor suppressor gene inactivation.

During tumorigenesis, tumors must evolve to evade the immune system and do so by disrupting the genes involved in antigen processing and presentation or up-regulating inhibitory immune checkpoint genes. We performed in vivo CRISPR screens in syngeneic mouse tumor models to examine requirements for tumorigenesis both with and without adaptive immune selective pressure. In each tumor type tested, we found a marked enrichment for the loss of tumor suppressor genes (TSGs) in the presence of an adaptive immune system relative to immunocompromised mice. Nearly one-third of TSGs showed preferential enrichment, often in a cancer- and tissue-specific manner. These results suggest that clonal selection of recurrent mutations found in cancer is driven largely by the tumor's requirement to avoid the adaptive immune system.

Photocatalytic activity of MnTiO3 perovskite nanodiscs for the removal of organic pollutants.

MTO nanodiscs synthesized using the hydrothermal approach were explored for the photocatalytic removal of methylene blue (MB), rhodamine B (RhB), congo red (CR), and methyl orange (MO). The disc-like structures of ~16 nm thick and ~291 nm average diameter of stoichiometric MTO were rhombohedral in nature. The MTO nanodiscs delivered stable and recyclable photocatalytic activity under Xe lamp irradiation. The kinetic studies showed the 89.7, 80.4, 79.4, and 79.4 % degradation of MB, RhB, MO, and CR at the rate constants of 0.011(±0.001), 0.006(±0.001), 0.007(±0.0007), and 0.009 (±0.0001) min-1, respectively, after the 180 min of irradiation. The substantial function of photogenerated holes and hydroxide radicals pertaining to the dye removal phenomena is confirmed by radical scavenger trapping studies. Overall, the present studies provide a way to develop pristine and heterostructure perovskite for photocatalysts degradation of various organic wastes.

Eco-Friendly Synthesis, Crystal Chemistry, and Magnetic Properties of Manganese-Substituted CoFe2O4 Nanoparticles.

The authors report on the effect of manganese (Mn) substitution on the crystal chemistry, morphology, particle size distribution characteristics, chemical bonding, structure, and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles (NPs) synthesized by a simple, cost-effective, and eco-friendly one-pot aqueous hydrothermal method. Crystal structure analyses indicate that the Mn(II)-substituted cobalt ferrites, Co1-x Mn x Fe2O4 (CMFO, x = 0.0-0.5), were crystalline with a cubic inverse spinel structure (space group Fd 3 m ). The average crystallite size increases from 8 to 14 nm with increasing Mn(II) content; the crystal growth follows an exponential growth function while the lattice parameters follow Vegard's law. Chemical bonding analyses made using Raman spectroscopic studies further confirm the cubic inverse spinel phase. The relative changes in specific vibrational modes related to octahedral sites as a function of Mn content suggest a gradual change of measure of inversion of the ferrite lattice at nanoscale dimensions. Small-angle X-ray scattering and electron microscopy revealed a narrow particle size distribution with the spherical shape morphology of the CMFO NPs. The zero-field-cooled and field-cooled magnetic measurements revealed the superparamagnetic behavior of CMFO NPs at room temperature. The sample with x = 0.3 indicates a lower value of blocking temperature (9.16 K) with the improved (maximum) value of saturation magnetization. The results and the structure-composition-property correlation suggest that the economic, eco-friendly hydrothermal approach can be adopted to process superparamagnetic nanostructured magnetic materials at a relatively lower temperature for practical electronic and electromagnetic device applications.

Structural correlation of a nanoparticle-embedded mesoporous CoTiO3 perovskite for an efficient electrochemical supercapacitor.

We synthesized mesoporous cobalt titanate (CTO) microrods via the sol-gel method as an outstanding working electrode for the supercapacitor. The mesoporous CTO microrods were amassed in hexagonal shapes of an average width of ∼670 nm, and were composed of nanoparticles of average diameter ∼41 nm. The well crystalline CTO microrods of the hexagonal phase to the R3̄ space group possessed an average pore size distribution of 3.92 nm throughout the microrod. The mesoporous CTO microrods with increased textural boundaries played a vital role in the diffusion of ions, and they provided a specific capacitance of 608.4 F g-1 and a specific power of 4835.7 W kg-1 and a specific energy of 9.77 W h kg-1 in an aqueous 2 M KOH electrolyte, which was remarkably better than those of Ti, La, Cr, Fe, Ni, and Sr-based perovskites or their mixed heterostructures supplemented by metal oxides as an impurity. Furthermore, the diffusion-controlled access to the OH- ions (0.27 µs) deep inside the microrod conveyed high stability, a long life cycle for up to 1950 continuous charging-discharging cycles, and excellent capacitance retention of 82.3%. Overall, the mesoporous CTO shows its potential as an electrode for a long-cycle supercapacitor, and provides opportunities for additional enhancement after developing the core-shell hetero-architecture with other metal oxide materials such as MnO2, and TiO2.

Empowerment of Anganwadi Workers in Oral Health Care: A Kerala Experience.

INTRODUCTION: Oral diseases are a serious public health problem, which affects the overall health of a person. The lack of available and affordable oral health services, especially in a developing country like India, not only results in aggravation of the disease, but also enhances the cost of treatment and care. Education and involvement of community workers like Anganwadi workers aid to remove stigma, discrimination and provide better atmosphere conducive for patients with various diseases. AIM: To assess the knowledge and practice of oral health care among the AWWs of the Pulikeezh block Panchayath before and after an oral health education training. MATERIALS AND METHODS: A self-administered questionnaire was distributed to anganwadi workers of the Pulikeezh block Panchayath, Thiruvalla, Kerala before and after an oral health education training within a period of 3 months. RESULT: The mean knowledge and practice scores in the pretest were found to be 9.6 + 2.2 and 5.0 + 1.0 respectively. The posttest conducted after a 3-month period showed an increase in the knowledge and practice score with a mean of 10.9 + 2.2 and 5.7 + 0.6 respectively. The increase in knowledge and practice was statistically significant (p < 0.0001). CONCLUSION: Empowered women are recognizably key agents in the change process who can play an effective role for health promotion. AWWs can function as oral health guides who can create awareness and help in prevention oral diseases. CLINICAL SIGNIFICANCE: As the oral health of an individual is set in the preschool period and more than 90% of dental diseases are preventable; preventive factors established around this age will determine the person's dental health for many years to come. The inclusion of oral health education in Anganwadi centers can be helpful in prevention of dental diseases. HOW TO CITE THIS ARTICLE: Cherian SA, Joseph E, et al. Empowerment of Anganwadi Workers in Oral Health Care: A Kerala Experience. Int J Clin Pediatr Dent 2019;12(4):268-272.

Fusarium oxysporum cell elicitor enhances betalain content in the cell suspension culture of Celosia cristata.

We started a cell suspension culture from magenta coloured calli of cockscomb to study the effect of biotic and abiotic elicitors on the biosynthesis of betalain pigments. The cultures were grown in a flask containing 30 ml MS media fortified with 13.5 µM 2,4-D and 0.44 µM BAP. These cultures were elicited during its log-phase of growth using fungal elicitors (prepared from mycelia of Fusarium oxysporum), yeast extract, copper sulphate and cobalt chloride. The elicitation reduced the cell count, cell viability and percent pigmented cell in the suspension culture. Similarly, it also resulted in reduced betalain content by all the elicitors except 0.125 × 10-3% fungal elicitor. Rather, fungal elicitor at this concentration significantly enhanced the amaranthin, betanin, betalamic acid and betaxanthin content in the culture. Besides this, copper sulphate doubled the pigment contribution (ratio of particular pigment content to total pigment content) of betaxanthin at all the concentrations. Therefore, we conclude that fungal elicitor can further be investigated to enhance the content of betalain pigments in suspension culture at a larger scale.

Mesoporous layered hexagonal platelets of Co3O4 nanoparticles with (111) facets for battery applications: high performance and ultra-high rate capability.

The thermally stable and crystalline 2D layered mesoporous hexagonal platelets of cobalt oxide (Co3O4) with (111) facets were prepared by using the template-free wet chemical synthesis approach. The high surface energy (111) facets known for a highly electroactive surface are expected to enhance the electrochemical properties, especially the rate capability. The highly crystalline Co3O4 with an average particle size of 25 nm formed a 2D mesoporous layered structure, with an average thickness of ∼40 nm, a pore size of 8-10 nm, and a specific surface area of 45.68 m2 g-1 promoting large surface confined electrochemical reaction. The 2D layered mesoporous Co3O4 exhibits a maximum specific capacity of 305 mA h g-1 at a scan rate of 5 mV s-1 and 137.6 mA h g-1 at a current density of 434.8 mA g-1. The maximum energy and power densities of 32.03 W h kg-1 and 9.36 kW kg-1, respectively, are achieved from the 2D hexagonal platelets of mesoporous Co3O4 nanoparticles with (111) facets. An excellent ultra-high rate capability of ∼62% capacity retention was observed after increasing the discharge current density from ∼434.8 mA g-1 to 43 480 mA g-1. Furthermore, a cycling stability of 81.25% was achieved even after 2020 charge-discharge cycles at a current density of 12 170 mA g-1. This high performance and ultra-high rate capability could be attributed to the (111) facets 'crystal plane' effect of Co3O4. Our results presented here confirm that the 2D mesoporous layered hexagonal platelets of Co3O4 exhibit "battery-mimic" behaviour in an aqueous electrolyte of KOH.

The effect of stoichiometry on the structural, thermal and electronic properties of thermally decomposed nickel oxide.

A thermal decomposition route with different sintering temperatures was employed to prepare non-stoichiometric nickel oxide (Ni1-δ O) from Ni(NO3)2·6H2O as a precursor. The non-stoichiometry of samples was then studied chemically by iodometric titration, wherein the concentration of Ni3+ determined by chemical analysis, which is increasing with increasing excess of oxygen or reducing the sintering temperature from the stoichiometric NiO; it decreases as sintering temperature increases. These results were corroborated by the excess oxygen obtained from the thermo-gravimetric analysis (TGA). X-ray diffraction (XRD) and Fourier transformed infrared (FTIR) techniques indicate the crystalline nature, Ni-O bond vibrations and cubic structural phase of Ni1-δ O. The change in oxidation state of nickel from Ni3+ to Ni2+ were seen in the X-ray photoelectron spectroscopy (XPS) analysis and found to be completely saturated in Ni2+ as the sintering temperature reaches 700 °C. This analysis accounts for the implication of non-stoichiometric on the magnetization data, which indicate a shift in antiferromagnetic ordering temperature (T N) due to associated increased magnetic disorder. A sharp transition in the specific heat capacity at T N and a shift towards lower temperature are also evidenced with respect to the non-stoichiometry of the system.

Spitzer shaped ZnO nanostructures for enhancement of field electron emission behaviors.

We observed enhanced field emission (FE) behavior for spitzer shaped ZnO nanowires synthesized via a hydrothermal approach. The spitzer shaped and pointed tipped 1D ZnO nanowires of average diameter 120 nm and length ∼5-6 µm were randomly grown over an ITO coated glass substrate. The turn-on field (E on) of 1.56 V µm-1 required to draw a current density of 10 µA cm-2 from these spitzer shaped ZnO nanowires is significantly lower than that of pristine and doped ZnO nanostructures, and MoS2@TiO2 heterostructure based FE devices. The orthodoxy test that was performed confirms the feasibility of a field enhancement factor (ß FE) of 3924 for ZnO/ITO emitters. The enhancement in FE behavior can be attributed to the spitzer shaped nanotips, sharply pointed nanotips and individual dispersion of the ZnO nanowires. The ZnO/ITO emitters exhibited very stable electron emission with average current fluctuations of ±5%. Our investigations suggest that the spitzer shaped ZnO nanowires have potential for further improving in electron emission and other functionalities after forming tunable nano-hetero-architectures with metal or conducting materials.

Prevalence, Characteristics, and Complications of Supernumerary Teeth in Nonsyndromic Pediatric Population of South India: A Clinical and Radiographic Study.

INTRODUCTION: Supernumerary teeth are the presence of more number of teeth over the normal dental formula and may occur in permanent as well as early mixed dentition. This study determined the prevalence, characteristics, and complications caused by supernumerary teeth in nonsyndromic South Indian pediatric population. MATERIALS AND METHODS: Characteristics of supernumerary teeth determined by clinical and radiographic examination were recorded. The age, sex, number of supernumerary teeth, eruption status, morphology, position, orientation, and complications (if any) associated with supernumerary teeth were recorded for each patient who had supernumerary teeth. The data collected were statistically analyzed. RESULTS: Supernumerary teeth were detected in 45 subjects (1.1%), of which 34 (75.6%) were male and 11 (24.4%) were female. There was no association between the number of supernumerary teeth and the gender of the patient. The total number of supernumerary teeth among the affected 45 patients was 54. The average number of supernumerary teeth per person was 1.2. The number of supernumerary teeth was one in 35 cases, two in 8 cases, and 3 in 1 case. Of the 45 patients, 8 patients with supernumerary teeth were in deciduous dentition stage, 29 patients were in mixed dentition stage, and 8 patients were in permanent dentition stage. Most supernumerary teeth presented in the anterior maxilla. Morphologically, conical-shaped supernumerary teeth were the most common finding. 68.5% of supernumerary teeth presented with straight orientation and inverted orientation was seen in 24.1%. Complications seen in patients with supernumerary teeth were delayed or noneruption of adjacent tooth malposition or rotation of adjacent teeth, diastema formation, and formation of dentigerous cyst. CONCLUSIONS: Supernumerary teeth have an incidence of 1.1% in South Indian population and can cause many complications that can harm the developing occlusion. Knowledge about supernumerary teeth may help the dentist in early diagnosis and early intervention.

Nano-Heteroarchitectures of Two-Dimensional MoS2@ One-Dimensional Brookite TiO2 Nanorods: Prominent Electron Emitters for Displays.

We report comparative field electron emission (FE) studies on a large-area array of two-dimensional MoS2-coated @ one-dimensional (1D) brookite (ß) TiO2 nanorods synthesized on Si substrate utilizing hot-filament metal vapor deposition technique and pulsed laser deposition method, independently. The 10 nm wide and 760 nm long 1D ß-TiO2 nanorods were coated with MoS2 layers of thickness ∼4 (±2), 20 (±3), and 40 (±3) nm. The turn-on field (E on) of 2.5 V/µm required to a draw current density of 10 µA/cm2 observed for MoS2-coated 1D ß-TiO2 nanorods emitters is significantly lower than that of doped/undoped 1D TiO2 nanostructures, pristine MoS2 sheets, MoS2@SnO2, and TiO2@MoS2 heterostructure-based field emitters. The orthodoxy test confirms the viability of the field emission measurements, specifically field enhancement factor (ßFE) of the MoS2@TiO2/Si emitters. The enhanced FE behavior of the MoS2@TiO2/Si emitter can be attributed to the modulation of the electronic properties due to heterostructure and interface effects, in addition to the high aspect ratio of the vertically aligned TiO2 nanorods. Furthermore, these MoS2@TiO2/Si emitters exhibit better emission stability. The results obtained herein suggest that the heteroarchitecture of MoS2@ß-TiO2 nanorods holds the potential for their applications in FE-based nanoelectronic devices such as displays and electron sources. Moreover, the strategy employed here to enhance the FE behavior via rational design of heteroarchitecture structure can be further extended to improve other functionalities of various nanomaterials.

Impact of Nanosize on Supercapacitance: Study of 1D Nanorods and 2D Thin-Films of Nickel Oxide.

We synthesized unique one-dimensional (1D) nanorods and two-dimensional (2D) thin-films of NiO on indium-tin-oxide thin-films using a hot-filament metal-oxide vapor deposition technique. The 1D nanorods have an average width and length of ∼100 and ∼500 nm, respectively, and the densely packed 2D thin-films have an average thickness of ∼500 nm. The 1D nanorods perform as parallel units for charge storing. However, the 2D thin-films act as one single unit for charge storing. The 2D thin-films possess a high specific capacitance of ∼746 F/g compared to 1D nanorods (∼230 F/g) using galvanostatic charge-discharge measurements at a current density of 3 A/g. Because the 1D NiO nanorods provide more plentiful surface areas than those of the 2D thin-films, they are fully active at the first few cycles. However, the capacitance retention of the 1D nanorods decays faster than that of the 2D thin-films. Also, the 1D NiO nanorods suffer from instability due to the fast electrochemical dissolution and high nanocontact resistance. Electrochemical impedance spectroscopy verifies that the low dimensionality of the 1D NiO nanorods induces the unavoidable effects that lead them to have poor supercapacitive performances. On the other hand, the slow electrochemical dissolution and small contact resistance in the 2D NiO thin-films favor to achieve high specific capacitance and great stability.

PIM-1 mixed matrix membranes for gas separations using cost-effective hypercrosslinked nanoparticle fillers.

High-free-volume glassy polymers, such as polymers of intrinsic microporosity (PIMs) and poly(trimethylsilylpropyne), have attracted attention as membrane materials due to their high permeability. However, loss of free volume over time, or aging, limits their applicability. Introduction of a secondary filler phase can reduce this aging but either cost or instability rules out scale up for many fillers. Here, we report a cheap, acid-tolerant, nanoparticulate hypercrosslinked polymer 'sponge' as an alternative filler. On adding the filler, permeability is enhanced and aging is strongly retarded. This is accompanied by a CO2/N2 selectivity that increases over time, surpassing the Robeson upper bound.