3D Computed Tomography vs. 2D radiography: comparison of 3D direct anthropometry with 2D norm calculations and analysis of differences in soft tissue measurements.

OBJECTIVE: The aim of this study was twofold: (1) to compare soft tissue measurements of the same distances obtained from 3D computed tomography reconstructions with 2D cephalometric radiograms, (2) to compare data from 3D measurements from direct anthropometry and 2D "norms" for the facial measurements. PATIENTS AND METHODS: A total of 40 Caucasian patients that had their CBCT scans for various dental and dentoskeletal reasons were enrolled in this study. All the patients had large field of view (from the forehead to the chin). The data were stored in DICOM format and imported into a software for 3D reconstructions. After 3D facial soft tissue model generation, the distances between 18 soft tissue points were measured. The 3D soft tissue analysis was performed, and the facial indices were calculated. The mean 3D values were compared with 2D measurements performed on lateral cephalograms and Arnett's and Farkas' norms. The measurements were statistically compared using Student's t-test. RESULTS: Assessments from 2D and 3D measurements showed no statistical difference except for the distance Pogonion (for both male and female) and Labial superius prominence (females) to the True Vertical Line in 2D /Plane in case of 3D measurements. There was a significant difference between all 3D measurements and Arnett's and anthropometric Farkas' "norms". The mean difference between Farkas' "norms" and 3D measurements was within 3 mm for 70% of measurements. CONCLUSIONS: According to the results, 3D soft tissue analysis allows for complete diagnostic determination. The 3D "norms" are to be verified on a greater sample.

Oral rehabilitation of oncology patients with dental implants after reconstruction surgery with autogenous flaps.

OBJECTIVE: Reconstruction after radical cancer surgery in terms of function and esthetics can be quite demanding. The aim of this study was to evaluate oral rehabilitation with autogenous flaps and dental implants for maxillofacial reconstruction in oncologic patients after implant insertions. MATERIALS AND METHODS: The study consisted of 19 patients diagnosed with either squamous cell carcinoma, fusocellular carcinoma, or mucoepidermoid carcinoma. The reconstruction of the maxillofacial defects was done with autogenous flaps (free fibular flap, antero-lateral thigh flap, radial forearm flap, or rotational pedicled temporal muscle flap). Implants were inserted on the average 32.03±19.51 months after reconstructive operations. A total of 82 implants were inserted. Mean follow-up after maxillo-facial surgery was 7.2 years (mean 86.56±22.04 months). Mean follow-up after implant insertions was 4.5 years (mean 54.6±21.82). Primary outcome was implant survival. Secondary outcome was evaluation of post-surgical complications. RESULTS: There were surgical revisions in seven patients after reconstructive surgery with flaps, mainly due to tumor relapse. Complications were seen in 11 patients. There was one implant failure. Overall implant survival rate was 98.8%. No relations were found between implant survival rate and gender, type of tumor, type of microvascular free flap, radiation therapy, chemotherapy, and prosthesis type. CONCLUSIONS: According to the results of this study, oral rehabilitation with dental implants inserted in free flaps for maxillofacial reconstruction after ablative oncologic surgery can be considered as a safe treatment modality with successful outcomes.

Analysis and comparison of quality of life and patients' satisfaction between dental-skeletal dysmorphisms and Obstructive Sleep Apnea (OSA) patients following orthognathic surgery.

OBJECTIVE: The aim of this study was to evaluate the impact of orthognathic surgery on the patients' satisfaction and quality of life (QoL) in patients with dental skeletal dysmorphisms and Obstructive Sleep Apnea (OSA). SUBJECTS AND METHODS: Patients were grouped into two cohorts, patients with OSA (G1) and patients with dento-skeletal dysmorphisms (G2). SF-36 questionnaire was obtained from all subjects before interventions. A standardized follow-up protocol, including a second SF-36 questionnaire was planned as at least 6 months after surgery. The impact of surgery on satisfaction was evaluated by post-operative patient satisfaction-based survey. RESULTS: 61 patients were included as: 21 OSA (G1), 12 Class II (G2-a) and 28 Class III (G2-b) patients. The mean post-operative follow-up was 65.47±26.36 months. In the SF-36 results, when pre and post operative surveys were compared, the quality of life increased significantly for G1 in all items except for body pain. In G2, when pre and post operative surveys were compared, the quality of life increased significantly in items related to emotional well-being, health transition, role limitations due to emotional problems, while other parameters did not significantly change. When groups were compared, there was no difference among them except for physical functioning which was improved for OSA patients. According to the Rustemeyer results, overall post-operative satisfaction score was 84.92±14.72%. There was a significant difference for patient satisfaction considering facial aesthetics in both groups. For chewing function there was no difference for patient satisfaction in G1, but there was a significant difference in G2 patients. CONCLUSIONS: Orthognathic surgery seems to be beneficial in terms of patients' satisfaction and patients' satisfaction for both dental skeletal dysmorphism and OSA patients.

Open reduction and internal fixation without rigid maxillomandibular fixation: evidence based or merely a surgical dictum? A comparative pilot study on 24 cases.

OBJECTIVE: The objective of the study was to evaluate the results and immediate postoperative complications following open reduction and internal fixation of mandibular fractures with or without postoperative maxillo-mandibular fixation MATERIALS AND METHODS: The study spanned over a period of 24 months, extending from October 2015 to October 2017. The study sample comprised 24 subjects between the age range of 18 to 65 years. They were randomly divided into two groups: Group A included subjects in whom open reduction and internal fixation was followed by maxilla-mandibular fixation for 15 days, and Group B subjects in whom only open reduction and internal fixation was done, followed by immediate mobilization. The outcomes evaluated were swelling, pain, simplified oral hygiene index and occlusion. The subjects were followed for all these outcomes on 1st, 7th and 15th days. The occlusion was assessed for 5 days. Any other intra/post-operative complications were additionally noted. RESULTS: There was no statistical difference between the groups for swelling, pain and occlusion. The patients with postoperative maxilla-mandibular fixation had poorer oral hygiene when compared to the other group (p<0.001). CONCLUSIONS: The use of maxilla-mandibular fixation post open reduction and internal fixation seems to offer no additional benefits to the patients. According to the results of the study, this traditional surgical dictum seems to be used by the surgeons due to the lack of any scientific evidence. However, further studies should be conducted to confirm this statement.

Custom made/patient specific alloplastic total temporomandibular joint replacement in immature patient: a case report and short review of literature.

OBJECTIVE: Temporomandibular joint reconstructive surgery in a growing patient represents a challenging situation. Autogenous and alloplastic reconstructive options are being studied in literature; however, there are still some limitations. The objective of this case report is to evaluate a novel custom-made prosthetic system in a 12-year-old TMJ ankylosis patient. CASE PRESENTATION: The patient had complaints of temporomandibular joint ankylosis and hypoplasia. The patient had already been operated two times with autogenous grafts. Swelling and tumefaction were apparent on the right side of the face. Mouth opening was 1.5 centimeters, with limitations in lateral and protrusive movements of the jaws. Hypertonic muscles and pain upon palpation were registered. There were no signs of luxation, fracture, or traumatic avulsion. After examination, unilateral TMJ ankylosis was apparent on TC scans. Revision surgery was planned with the use of true plastic temporomandibular joint customized prosthesis. The patient underwent a TMJ reconstruction surgery using CADCAM custom-made patient specific prosthesis. The follow up period of this patient was 46 months and showed successful healing with no complications. CONCLUSIONS: Replacement of TMJ with custom made alloplastic material that is reported can be considered as a safe and useful option for growing young individuals in selected cases.

Solitary fibrous tumor of parotid gland: a case report and short review of literature.

OBJECTIVE: This case report represents a solitary fibrous tumor, which is a very rare neoplasm in the parotid gland. CASE PRESENTATION: 80-year-old Caucasian female patient with palpable, immobile, painless, slow growing, semi-rigid-elastic neoplasm in the left parotid gland, that was existing for four months. There were no signs of inflammation and facial paralysis. The tumor was initially interpreted as a salivary gland neoplasm of uncertain origin. Fine needle aspiration was performed 2 times; however, the precise diagnosis was challenging. The tumor was excised, regional lymphadenectomy was performed. Morphological and immunophenotypical findings were consistent with solitary fibrous tumor of parotid gland. Currently, the patient is under regular follow-up period at 9 months with no evidence of metastasis or recurrence. CONCLUSIONS: Although very rare, solitary fibrous tumor (SFT) should be suspected in cases of slow growing, solid, well-defined nodules of the parotid gland. The SFT of the parotid gland are usually benign tumors, however there is a low risk of recurrency and malignant behavior with metastatic potential. Complete resection of the tumor should be performed since it is crucial for management without any recurrence.

Evaluation of Arthrocentesis with hyaluronic acid injections for management of temporomandibular disorders: a systematic review and case series.

Although arthrocentesis is an accepted safe treatment modality for the management of temporomandibular disorders (TMD) in symptomatic patients, the benefit of hyaluronic acid (HA) injections remains uncertain. The aim of this study was to evaluate whether intra-articular HA injections adjunctive to arthrocentesis can be more effective than other medications for the improvement of TMD associated symptoms. Additionally, the impact of HA injections on quality of life of TMD patients was assessed with SF-36® questionnaire in a cohort of patients. An electronic search of Medline, Scopus and Cochrane databases was performed up to March 2020. The following search terms were used: "arthrocentesis", "hyaluronic acid", "intra-articular injections", "visco-supplementation", "temporomandibular disorders". Prospective and retrospective studies that reported the application of HA injections compared to other intra-articular drugs for the treatment of temporomandibular disorders were included. Systematic or narrative reviews and pre-clinical studies were excluded. Additionally, a retrospective clinical study was performed for evaluation of changes in quality of life before and after arthrocentesis with HA injections. In the systematic review, the initial search yielded 1327 articles. After screening of the titles, abstracts, and full texts, 29 studies were selected (26 randomized studies, 2 controlled clinical trials, 1 retrospective report). In the clinical study, 12 patients were included. Intra-articular injections of HA and other medications together with arthrocentesis seemed to be beneficial for improvement of functional symptoms of TMD and pain. The case series also supported the efficacy of HA injections showing an improvement of quality of life of these patients. However, from literature review, it was impossible to identify an optimum drug or a protocol for predictably improving the pain and/or functional symptoms of temporomandibular problems, due to different etiologies, diversity of treatment modalities and conflicting results. In conclusion, there is no consensus in the literature that HA injections shows better results in comparison with other treatment modalities. According to the results of the present clinical study, HA injections with/without arthrocentesis seems to be beneficial in terms of clinical symptoms and quality of life of the TMD patients.

Microsurgical endodontic treatment of the upper molar teeth and their relationship with the maxillary sinus: a retrospective multicentric clinical study.

PURPOSE: To assess the clinical and radiographic success rate of microsurgical endodontic treatment of upper molar teeth in relationship with the maxillary sinus, with 12 months follow-up. METHODS: Patients treated with microsurgical endodontic treatment of upper molar teeth in the period between 2017 and 2019 were recruited from two dental clinics according to specific selection criteria. The outcomes were determined based on clinical and radiographic results taken three, six and 12 months post-operatively, compared with those taken immediately before and after surgery. Clinical and radiographic outcomes were recorded. The distance between the most apical part of the root and of the lesion to the maxillary sinus was measured on CBCT images before the surgery. Patient-related outcomes were recorded. RESULTS: Out of 35 patients evaluated, 21 were selected according with the selection criteria for a total of 27 roots and 29 canals treated. After 12 months, 18 patients showed a complete healing whereas three demonstrated incomplete healing. Consequently, the success rate in this study was 85.7% after one year. In 28.5% (6 patients) there was a perforation of the Schneiderian membrane that didn't seem to affect the outcome. All patients kept the molar one year later. The pain level decreased significantly over the time during the first week after surgery. CONCLUSION: Microsurgical Endodontic treatment of the upper molar teeth should be considered a valid and predictable treatment option even in case of Schneiderian membrane perforation. Future clinical studies with a larger sample size are needed to compare the results obtained.

Collagenated heterologous cortico-cancelleus bone mix stimulated dental pulp derived stem cells.

Collagenated heretologous cortico-cancelleus bone mix (CHCCBM) is largely employed in maxillary and dental surgery for regeneration procedures, and is similar to human bone from chemical and physical point of view and promotes osteogenesis. In order to get more inside how this biomaterial induces osteoblast gene expression to promote bone formation, the mRNA levels of bone related genes were compared in human osteoblasts and dental pulp stem cells, using real time RT-PCR. The obtained results demonstrated that CHCCBM enhance stem cells differentiation and deposition of matrix by the activation of osteoblast related genes SP7, FOSL1 and SPP1.

Osteogenesis: how can it be stimulated?

Biophysical therapy can be performed using inductive, capacitive, mechanic or implanted devices. The mechanism of action of physical stimuli is at a membrane level where the activation of calcium channels determines the enhancement of cell proliferation and the production of growth factors. Biophysical therapy should be performed using devices and modalities described in the literature. The biophysical stimulation of osteogenesis is effective in the enhancement of the biology of fracture healing in presence of a correct orthopedic treatment in terms of good alignment and stabilization at the fracture site. The choice of which method must be used depends on the segment of bone that has to be treated, the type of fracture and if it is possible to apply the device on the skin. The presence of internal or external fixation devices is not a contraindication.

Bimaxillary orthognathic surgery with a conventional saw compared with the piezoelectric technique: a longitudinal clinical study.

The only cutting technique used for osteotomies in orthognathic surgery for many years has been a saw, but recently piezoelectric surgery has been introduced as a possible alternative. The aim of this study was to find out if piezoelectric surgery can be more comfortable for patients having orthognathic surgery. A total of 25 patients with dentofacial deformities (seven male and 18 female), were treated from January 2016 to September 2017. In 11 patients, osteotomies were made using a conventional saw, while in 14 a piezoelectric device was used. The variables assessed were: operating time, postoperative swelling, postoperative pain, and cutaneous sensitivity of the upper and lower lips. The duration of operation for the piezosurgery group was significantly longer than that for controls, but the patients had less swelling at all follow-up visits, and the difference was significant at the 30-day follow-up (p=0.045). Those who had piezosurgery had significantly less pain at the three-day follow up (p=0.035). There was a significant difference in cutaneous sensitivity only for the right side of the upper lip and only at the one-day follow-up. We conclude that piezoelectric surgery offers some advantages in lessening swelling and the perception of pain after orthognathic surgery, but further investigations are required.

Replica-guided trauma surgery.

The aim of this study is to present a new approach to the surgical treatment of fractures of the middle third of the face, based on the use of resorbable materials and stereolithographic models. From 2009 to 2014, we treated 10 cases of orbitozygomatic trauma mostly as secondary surgery. For each case, an anatomical replica had been produced simulating the expected result and was then used to contour the resorbable plates on its surface, even before the beginning of the surgical procedure itself. The plates and meshes already bended act as a guide to bony reduction procedure. No complications occurred: all patients healed well, without inflammatory reactions. The results obtained corresponded to the expected results. This technique has been employed for primary or secondary treatment of fracturesof the middle third facial, where it is not always easy to understand the displacement of bony segments and where the use of resorbables plates could be particularly beneficial, as they do not interfere with the maxillofacial skeleton physiology and avoid the necessity to remove plates and screws. Combined use of stereolithographic model and resorbable materials allow a new surgical approach based on the realization of the surgical procedure on the model, then transferred from the patient to the model, thanks to plates and meshes. This technique helps to overcome many of the limits of the conventional technique: the need of minimal surgical access, in order to minimize facial scarring and the vasculo-nervous structures that cross the head and neck district and the obligation to restore not only the morphology but also the biological functions.

Nasal reconstruction: our experience.

The nose is a critically important aesthetic and functional portion of the face. We can explore nasal defects following trauma or tumor resections. Reconstructive techniques based on primary closure, skin graft, local flap, regional flap and microvascular free tissue transfer provides an algorithmic framework applicable to any reconstructive problem. From 2010 to 2016, 33 patients were treated with nasal reconstruction. Malignant tumor resection was the main cause of nasal defect. The most common tumor resected was BCC (basal cell carcinoma) followed by SCC (squamous cell carcinoma). Recurrence of malignant tumor were also treated. As described in the literature, we used the most common reconstructive techniques to handle post-resection defects. Most of the defects involved the dorsum and the ala of the nose, only rarely had the skeleton been affected by the resection. When the cartilage had been sacrificed, a graft from the septum or from the ear flap was harvested. All patients resulted in optimal reconstruction. In any case, a second surgery was needed. All the surgical procedures were performed in one single stage except for the paramedian forehead flap that required a second stage for division and inset of the flap. All donor sites did not show functional and aesthetic damage. All patients resulted in a morpho-functional restoration of the area affected by the resection with a high success rate. Following the algorithm when restoring the anatomical subunit is the base purpose has determined satisfactory results.

Cone-morse implant connection system significantly reduces bacterial leakage between implant and abutment: an in vitro study.

Osseointegrated implants are very popular dental treatments today in the world. In osseointegrated implants, the occlusal forces are transmitted from prosthesis through an abutment to a dental implant. The abutment is connected to the implant by mean of a screw. A screw is the most used mean for connecting an implant to an abutment. Frequently the screws break and are lost. There is an alternative to screw retained abutment systems: the cone-morse connection (CMC). The CMC, thanks to the absence of the abutment screw, guarantees no micro-gaps, no micro-movements, and a reduction of bacterial leakage between implant and abutment. As P. gingivalis and T. forsythia penetration might have clinical relevance, it was the purpose of this investigation to evaluate molecular leakage of these two bacteria in a new CMC implants systems (Leone Spa®, Florence, Italy). To identify the capability of the implant to protect the internal space from the external environment, the passage of genetically modified Escherichia coli across implant-abutment interface was evaluated. Four cone-morse Leone implants (Leone® Spa, Florence, Italy) were immerged in a bacterial culture for 24 h and bacteria amount was then measured inside implant-abutment interface with Real-time PCR. Bacteria were detected inside all studied implants, with a median percentage of 3% for P. gingivalis and 4% for T. forsythia. Cone-morse connection implant system has very low bacterial leakage percentage and is similar to one-piece implants.