ABSTRACT
While interest in soft robotics as surgical tools has grown due to their inherently safe interactions with the body, their feasibility is limited in the amount of force that can be transmitted during procedures. This is especially apparent in minimally invasive procedures where millimeter-scale devices are necessary for reaching the desired surgical site, such as in interventional bronchoscopy. To leverage the benefits of soft robotics in minimally invasive surgery, a soft robot with integrated tip steering, stabilization, and needle deployment capabilities is proposed for lung tissue biopsy procedures. Design, fabrication, and modeling of the force transmission of this soft robotic platform allows for integration into a system with a diameter of 3.5 mm. Characterizations of the soft robot are performed to analyze bending angle, force transmission, and expansion during needle deployment. In-vitro experiments of both the needle deployment mechanism and fully integrated soft robot validate the proposed workflow and capabilities in a simulated surgical setting.
ABSTRACT
Colonoscopies allow surgeons to detect common diseases i.e. colorectal cancer, ulcers and other ailments. However, there is a risk of bleeding in the lower gastrointestinal (GI) tract while maneuvering endoscopes. This may be due to perforations, hemorrhaging, polyps, diverticuli or post-biopsy complications. Thus, it is essential for the surgeon to be able to detect bleeding at the site and evaluate the severity of blood leakage. This paper presents a soft sensor that can detect the presence of blood at the bleeding site during colonoscopies. The sensor consists of optical waveguides that interface with a microfluidic channel. Blood flow causes absorption and scattering of incident light that can be picked up by the optical sensing apparatus via light transmission through the waveguide. The surgeon can be alerted when bleeding occurs through a graphical user interface. The device is compact and measures only 1 mm thick. This allows the sensor to be circumferentially mounted onto a colonoscope at different locations. The sensor is able to record the presence of blood as an optical loss, rapidly detect the presence of blood in under 100 milliseconds as it enters the microchannel, and differentiate between gastric fluid and blood through changes in measured optical loss.
ABSTRACT
Lung cancer is one of the deadliest forms of cancers and is often diagnosed by performing biopsies with the use of a bronchoscope. However, this diagnostic procedure is limited in ability to explore deep into the periphery of the lung where cancer can remain undetected. In this study, we present design, modeling, fabrication, and testing of a one degree of freedom soft robot with integrated diagnostic and interventional capabilities as well as vision sensing. The robot can be deployed through the working channel of commercial bronchoscopes or used as a stand-alone system as it integrates a micro camera to provide vision sensing and controls to the periphery of the lung. The small diameter (2.4 mm) of the device allows navigation in branches deeper in the lung, where current devices have limited reachability. We have performed mechanical characterizations of the robotic platform, including blocked force, maximum bending angle, maximum angular velocity, and workspace, and assessed its performance in in vitro and ex vivo experiments. We have developed a computer vision algorithm, and validated it in in vitro conditions, to autonomously align the robot to a selected branch of the lung and aid the clinician (by means of a graphical user interface) during navigation tasks and to perform robot-assisted stabilization in front of a lesion, with automated tracking and alignment.
Subject(s)
Lung Neoplasms , Robotics , Algorithms , Humans , Lung , Lung Neoplasms/diagnosis , Lung Neoplasms/therapyABSTRACT
Colonoscopy is the gold standard for colorectal cancer diagnosis; however, limited instrument dexterity and no sensor feedback can hamper procedure safety and acceptance. We propose a soft robotic sleeve to provide sensor feedback and additional actuation capabilities to improve safety during navigation in colonoscopy. The robot can be mounted around current endoscopic instrumentation as a disposable "add-on", avoiding the need for dedicated or customized instruments and without disrupting current surgical workflow. We focus on design, finite element analysis, fabrication, and experimental characterization and validation of the soft robotic sleeve. The device integrates soft optical sensors to monitor contact interaction forces between the colon and the colonoscope and soft robotic actuators that can be automatically deployed if excessive force is detected, to guarantee pressure redistribution on a larger contact area of the colon. The system can be operated by a surgeon via a graphic user interface that displays contact force values and enables independent or coordinated pressurization of the soft actuators upon demand, in case deemed necessary to aid navigation or distend colon tissue.
ABSTRACT
Metallic tools such as graspers, forceps, spatulas, and clamps have been used in proximity to delicate neurological tissue and the risk of damage to this tissue is a primary concern for neurosurgeons. Novel soft robotic technologies have the opportunity to shift the design paradigm for these tools towards safer and more compliant, minimally invasive methods. Here, we present a pneumatically actuated, origami-inspired deployable brain retractor aimed at atraumatic surgical workspace generation inside the cranial cavity. We discuss clinical requirements, design, fabrication, analytical modeling, experimental characterization, and in-vitro validation of the proposed device on a brain model.
ABSTRACT
Devices fabricated using soft materials have been a major research focus of late, capturing the attention of scientists and laypersons alike in a wide range of fields, from microfluidics to robotics. The functionality of such devices relies on their structural and material properties; thus, the fabrication method is of utmost importance. Here, multilayer soft lithography, precision laser micromachining, and folding to establish a new paradigm are combined for creating 3D soft microstructures and devices. Phase-changing materials are exploited to transform actuators into structural elements, allowing 2D laminates to evolve into a third spatial dimension. To illustrate the capabilities of this new fabrication paradigm, the first "microfluidic origami for reconfigurable pneumatic/hydraulic" device is designed and manufactured: a 12-layer soft robotic peacock spider with embedded microfluidic circuitry and actuatable features.
ABSTRACT
INTRODUCTION: Merging robotics with laser eye surgery could enhance precision, repeatability and automation. During some eye laser procedures the patient is awake, thus eye stabilization is desired to avoid movements that could affect the treatment. MATERIAL AND METHODS: The ESPRESSO platform has a two-stage actuation system to position a stabilization tool on the eye, a proximity sensing unit to monitor the stabilization tool position, and a sensing unit to monitor the pressure exerted on the eye. The platform is tested in-vitro and ex-vivo with clinicians. A maximum pressure to be exerted on the eye is defined with expert ophthalmic surgeons to be 22 mmHg: physiological intraocular pressure (IOP) range is 10-21 mmHg. This pressure corresponds to a force of 0.3 N. RESULTS: The necessary contact force to have eye fixation (according to the clinicians' feedback) is evaluated: maximum values resulted always below 0.3 N. A maximum IOP increase of 4.67 mmHg is observed, that is a slight variation with respect to the performance of other platforms (IOP elevations up to 328 mmHg). CONCLUSION: Design and initial assessment of the platform is presented. Eye stabilization is performed without exceeding the critical contact force value and causing large/sudden IOP increases.
