The application of catalyst-recovered SnO2 as an anode material for lithium secondary batteries.

We studied the electrochemical characteristics of tin dioxide (SnO2) recovered from waste catalyst material which had been previously used in a polymer synthesis reaction. In order to improve the electrochemical performance of the SnO2 anode electrode, we synthesized a nanocomposite of recovered SnO2 and commercial iron oxide (Fe2O3) (weight ratio 95:5) using a solid state method. X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) analyses revealed an additional iron oxide phase within a porous nanocomposite architecture. The electrochemical characterizations were based on galvanostatic charge-discharge (CD) curves, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). In the first discharge, the capacity of the SnO2-Fe2O3 nanocomposite was 1700 mAh g(-1), but was reduced to about 1200 mAh g(-1) in the second discharge. Thereafter, a discharge capacity of about 1000 mAh g(-1)was maintained up to the 20th cycle. The SnO2-Fe2O3 nanocomposite showed better reversible capacities and rate capabilities than either the recovered SnO2 or commercial Fe2O3 nanoparticle samples.

Recovery and electrochemical performance in lithium secondary batteries of biochar derived from rice straw.

Renewable biomass has attracted great attention for the production of biooil, biogas, and biochar, a carbon residual applicable for carbon sequestration and environmental remediation. Rice straw is one of the most common biomasses among agricultural wastes in South Korea. As part of our advanced and environmentally friendly research, we applied biochar derived from rice straw as the anode material for lithium-ion batteries (LIBs). Porous carbons with a high surface area were prepared from rice straw. Such porous carbons have exhibited particularly large reversible capacity and hence proven to be a candidate anode material for high-rate and high-capacity LIBs. Rice straw-derived biochars were synthesized at four different temperatures: 400, 550, 700, and 900 °C. The surface was modified by using HCl and H2O2 on the 550 °C biochar in order to increase the surface area. The resulting biochar was characterized by X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM). The surface area was measured by Brunauer-Emmett-Teller (BET) method. The electrochemical characterizations were investigated by galvanostatic charge-discharge (CD) curves, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). All samples exhibited reversible capacities of below 200 mAh g(-1). The surface-modified biochars exhibited improved cycle performance. Surface modification using HCl showed better cycle performance than H2O2. However, the capacities of the treated 550 °C biochar were similar to those of non-surface-modified biochar.