ABSTRACT
The purpose of this study was to develop a diagnostic tool to automatically detect temporomandibular joint osteoarthritis (TMJOA) from cone beam computed tomography (CBCT) images with artificial intelligence. CBCT images of patients diagnosed with temporomandibular disorder were included for image preparation. Single-shot detection, an object detection model, was trained with 3,514 sagittal CBCT images of the temporomandibular joint that showed signs of osseous changes in the mandibular condyle. The region of interest (condylar head) was defined and classified into 2 categories-indeterminate for TMJOA and TMJOA-according to image analysis criteria for the diagnosis of temporomandibular disorder. The model was tested with 2 sets of 300 images in total. The average accuracy, precision, recall, and F1 score over the 2 test sets were 0.86, 0.85, 0.84, and 0.84, respectively. Automated detection of TMJOA from sagittal CBCT images is possible by using a deep neural networks model. It may be used to support clinicians with diagnosis and decision making for treatments of TMJOA.
Subject(s)
Osteoarthritis , Temporomandibular Joint Disorders , Artificial Intelligence , Cone-Beam Computed Tomography , Humans , Mandibular Condyle , Osteoarthritis/diagnostic imaging , Temporomandibular Joint , Temporomandibular Joint Disorders/diagnostic imagingABSTRACT
Wnts determine cell polarity, cell proliferation, and cell differentiation during embryogenesis and play an essential role during tooth development initiation and morphogenesis. Wnt/ß-catenin signaling has a time-dependent role in development because various signaling molecules that mutually interact are involved in the pathway, and tight regulation of the pathway is essential for normal development. Studies investigating how the Wnt/ß-catenin signaling pathway controls the different stages of tooth development are rare. Specifically, the effects of Wnt/ß-catenin signaling loss of function on different stages of tooth development are currently unknown. Here, we report the stage-dependent role of Wnt/ß-catenin signaling in tooth development. In vivo loss and gain of function of Wnt/ß-catenin signaling were implemented through the genetic overexpression of DKK1 with heat shock-inducible transgenic models and the pharmacologic inhibition of ß-catenin destruction complex formation in zebrafish, respectively. We demonstrated that transient inhibition of Wnt/ß-catenin signaling interrupted tooth development in a stage-dependent manner and conditional activation of Wnt/ß-catenin signaling during 4V morphogenesis inhibited the development of 3V. These findings suggest that Wnt/ß-catenin signaling plays an important role in the morphogenesis of teeth and the initiation of sequential tooth development in a stage-dependent manner.
Subject(s)
Fishes , Tooth , Wnt Signaling Pathway , Animals , Odontogenesis , Wnt Proteins , beta CateninABSTRACT
This study investigated the effects of irradiance and exposure duration on dual-cured resin cements irradiated through ceramic restorative materials. A single light-curing unit was calibrated to three different irradiances (500, 1000, and 1500 mW/cm2) and irradiated to three different attenuating materials (transparent acryl, lithium disilicate, zirconia) with 1-mm thicknesses for 20 or 60 seconds. The changes in irradiance and temperature were measured with a radiometer (or digital thermometer) under the attenuating materials. The degree of conversion (DC) of dual-cure resin cement after irradiation at different irradiances and exposure durations was measured with Fourier transform near infrared spectroscopy. Two-way analysis of variance revealed that irradiance ( p<0.001) and exposure duration ( p<0.001) significantly affected temperature and DC. All groups showed higher DCs with increased exposure times ( p<0.05), but there were no statistically significant differences between the groups irradiated with 1000 mW/cm2 and 1500 mW/cm2 ( p>0.05). Higher-intensity irradiances yielded higher temperatures ( p<0.05), but exposure time did not affect temperature when materials were irradiated at 500 mW/cm2 ( p>0.05).
Subject(s)
Ceramics/chemistry , Light-Curing of Dental Adhesives/methods , Resin Cements/chemistry , Calibration , Curing Lights, Dental , Dental Materials/chemistry , Dental Porcelain , Materials Testing , Spectroscopy, Fourier Transform Infrared , Temperature , ZirconiumABSTRACT
OBJECTIVES: The associations between type 2 diabetes (T2D) and untreated dental caries was examined. This study hypothesized that there would be a positive association between T2D and the prevalence of decayed permanent teeth (DT) in representative Korean adults. METHODS: The information was derived from the Korea National Health and Nutrition Examination Survey conducted in 2011-2012. Sociodemographic and lifestyle variables, anthropometric and biochemical status, metabolic health and glucose tolerance status, oral health behaviors, and dental caries index were evaluated. RESULTS: The number of DT had a positive association with degree of fasting plasma glucose (FPG) level, and glycated hemoglobin (HbA1c) (p-value = 0.045 and 0.007, respectively). The levels of FPG and HbA1c increased with the number of DT (p for trend = 0.009 and 0.004, respectively). The prevalence of untreated caries uncontrolled T2D participants was about 26% higher than those with normal glucose tolerance levels after adjusting for potential confounders including diets and socioeconomic status (OR [95% CI] = 1.26 [1.02, 1.56]). CONCLUSIONS: T2D is an independent risk indicator for untreated caries in Korean adults.
Subject(s)
Dental Caries/epidemiology , Diabetes Mellitus, Type 2/complications , Adult , Glycated Hemoglobin , Humans , Nutrition Surveys , Republic of Korea , Risk FactorsABSTRACT
OBJECTIVE: This study investigated whether obesity is linked with dental caries. This study hypothesized that obesity may influence the number or prevalence of dental caries in Korean adults. SUBJECTS AND METHODS: Data were derived from Korea National Health and Nutrition Examination Survey performed at 2008-2010. Lifestyle, sociodemographic, and biochemical variables were analyzed. Indices related to obesity, sarcopenia, and metabolic syndrome were investigated. Finally, caries index and oral health behaviors were included for the analysis. RESULTS: The caries index was inversely associated with increasing body mass index (BMI) and body fat quartile (all p-values <.01). Subjects with high waist circumference who met the inclusion criteria of metabolic syndrome were less likely to have decayed tooth (p-value = .0009). Subjects with a BMI of 25 or more showed about 20% less prevalence of dental caries experience than normal individuals with a BMI of 18.5 to 23 glucose (odds ratio [95% confidence intervals] = 0.808 [0.684-0.956]). Similarly, subjects with total body fat in the highest quartile revealed about 20% less prevalence of caries experiences that those with body fat proportion in the lowest quartile (0.84 [0.672,1.049]). CONCLUSIONS: Obesity was inversely associated with occurrence or severity of dental caries in Korean adults.
Subject(s)
Body Mass Index , Dental Caries/epidemiology , Obesity/epidemiology , Adiposity , Adult , Female , Humans , Male , Metabolic Syndrome/epidemiology , Middle Aged , Prevalence , Protective Factors , Republic of Korea/epidemiology , Waist CircumferenceABSTRACT
The primary purpose of this study of metal-on-metal (MoM) hip resurfacing was to compare the effect of using a cementless or cemented femoral component on the subsequent bone mineral density (BMD) of the femoral neck. This was a single-centre, prospective, double-blinded control trial which randomised 120 patients (105 men and 15 women) with a mean age of 49.4 years (21 to 68) to receive either a cemented or cementless femoral component. Follow-up was to two years. Outcome measures included total and six-point region-of-interest BMD of the femoral neck, radiological measurements of acetabular inclination, neck-shaft and stem-shaft angles, and functional outcome scores including the Harris hip score, the Western Ontario and McMaster Universities Osteoarthritis Index and the University of California at Los Angeles activity scale. In total, 17 patients were lost to follow-up leaving 103 patients at two years. There were no revisions in the cementless group and three revisions (5%) in the cemented group (two because of hip pain and one for pseudotumour). The total BMD was significantly higher in the cementless group at six months (p < 0.001) and one year (p = 0.01) than in the cemented group, although there was a loss of statistical significance in the difference at two years (p = 0.155). All patient outcomes improved significantly: there were no significant differences between the two groups. The results show better preservation of femoral neck BMD with a cementless femoral component after two years of follow-up. Further investigation is needed to establish whether this translates into improved survivorship.
Subject(s)
Arthroplasty, Replacement, Hip/methods , Bone Cements/pharmacology , Bone Density , Femur Neck/surgery , Hip Prosthesis , Metal-on-Metal Joint Prostheses , Osteoarthritis, Hip/surgery , Adult , Aged , Double-Blind Method , Female , Humans , Male , Middle Aged , Prospective Studies , Prosthesis Design , Young AdultABSTRACT
OBJECTIVE: The aim of this study is to evaluate the reproducibility of working casts of a digital impression system by comparing them with the original, virtual, and rapid prototyping casts. MATERIALS AND METHODS: A total of 54 cast sets in clinically stable occlusion were used. They were scanned by an iTero intraoral scanner and converted into STL format virtual casts. Rapid prototyping casts and polyurethane casts were fabricated from the iTero milling system based on the virtual casts. Several horizontal and vertical measurements were performed from the four types of casts, that is, original stone casts, virtual casts, rapid prototyping casts, and polyurethane casts of iTero. Measurement error, intraclass correlation coefficient (ICC), and differences among the casts were calculated and compared. RESULTS: Casts from iTero milling machines exhibited greater dimensional differences and lower ICC values than did other casts. In addition, many of the measurements of the iTero working casts showed statistically significant differences in comparison to the three other types of casts. In contrast, there were no statistically significant differences between the virtual and original casts. CONCLUSION: Virtual casts made by the iTero intraoral scanner exhibited excellent reproducibility. However, the casts from the iTero milling machine showed greater dimensional differences and lower reproducibility compared to other types of casts.
Subject(s)
Dental Impression Technique , Imaging, Three-Dimensional/methods , Humans , Reproducibility of Results , Software , User-Computer InterfaceABSTRACT
BACKGROUND AND OBJECTIVE: Periodontitis is becoming a highly prevalent disease worldwide. Obstructive sleep apnea (OSA) is a common disorder that is characterized by repeated disruptions in breathing during sleep, and mouth breathing is a common characteristic among patients with OSA. We aimed to assess the hypothesis that OSA is associated with the onset and progression of periodontal disease. MATERIAL AND METHODS: This is a cross-sectional study of a total of 687 participants (460 men and 227 women), 47-77 years of age, who were examined between August 2009 and September 2010 as part of the Korean Genome and Epidemiology Study. The participants underwent standard polysomnography, clinical periodontal examination and health-screening examinations. Periodontitis was defined as clinical attachment level (CAL) ≥ 6 mm and probing pocket depth ≥ 4 mm. OSA was determined using the apnea-hypopnea index (AHI), and an AHI score of ≥ 5 was the cut-off used to indicate the presence of OSA. RESULTS: The results showed that 17.5% of the participants had periodontitis, 46.6% had OSA and 60.0% who were diagnosed with periodontitis had OSA. In our study, old age, male gender, current smoking status, mouth breathing during sleep and high AHI were identified as risk factors for periodontitis. OSA was positively associated with periodontitis [odds ratio (OR) = 1.84, 95% confidence interval (CI) = 1.18-2.87], probing pocket depth (OR = 2.22, 95% CI = 1.30-3.77) and CAL (OR = 1.86, 95% CI = 1.07-3.21) in a dose-response manner. Additionally, OSA was positively associated with periodontitis (OR = 2.51, 95% CI = 1.37-4.62) in subjects ≥ 55 years of age, but not in subjects < 55 years of age. CONCLUSION: There is a significant association between OSA and periodontal disease. Further research is needed to clarify the causal relationship between the two conditions.
Subject(s)
Periodontitis/epidemiology , Sleep Apnea, Obstructive/epidemiology , Age Factors , Aged , Cohort Studies , Cross-Sectional Studies , Disease Progression , Female , Humans , Male , Middle Aged , Mouth Breathing/epidemiology , Periodontal Attachment Loss/epidemiology , Periodontal Pocket/epidemiology , Polysomnography , Population Surveillance , Prospective Studies , Republic of Korea/epidemiology , Risk Factors , Sex Factors , SmokingABSTRACT
Surface damage of metallic implant surface at taper lock and clamped interfaces may take place through synergistic interactions between repeated contact loading and corrosion. In the present research, we investigated the influence of surface roughness and contact loading on the mechanical and chemical damage phenomena. Cobalt-chromium (CoCrMo) specimens with two different roughness configurations created by milling and grinding process were subjected to normal and inclined contact loading. During repeated contact loading, amplitude of surface roughness reached a steady value after decreasing during the first few cycles. During the second phase, the alternating experiment of rough surface contact and micro-etching was conducted to characterize surface evolution behavior. As a result, surface roughness amplitude continuously evolved-decreasing during contact loading due to plastic deformation of contacting asperities and increasing on exposure to corrosive environment by the preferential corrosion attack on stressed area. Two different instabilities could be identified in the surface roughness evolution during etching of contact loaded surfaces: increase in the amplitude of dominant wavenumber and increase in amplitude of a small group of roughness modes. A damage mechanism that incorporates contact-induced residual stress development and stress-assisted dissolution is proposed to elucidate the measured instabilities in surface roughness evolution.
Subject(s)
Metals/chemistry , Nanotechnology , Prostheses and Implants , Stress, Mechanical , Surface Properties , Weight-BearingABSTRACT
The Hill-Sachs lesion is an osseous defect of the humeral head that is typically associated with anterior shoulder instability. The incidence of these lesions in the setting of glenohumeral instability is relatively high and approaches 100% in persons with recurrent anterior shoulder instability. Reverse Hill-Sachs lesion has been described in patients with posterior shoulder instability. Glenoid bone loss is typically associated with the Hill-Sachs lesion in patients with recurrent anterior shoulder instability. The lesion is a bipolar injury, and identification of concomitant glenoid bone loss is essential to optimize clinical outcome. Other pathology (eg, Bankart tear, labral or capsular injuries) must be identified, as well. Treatment is dictated by subjective and objective findings of shoulder instability and radiographic findings. Nonsurgical management, including focused rehabilitation, is acceptable in cases of small bony defects and nonengaging lesions in which the glenohumeral joint remains stable during desired activities. Surgical options include arthroscopic and open techniques.
Subject(s)
Humeral Fractures/surgery , Joint Instability/diagnosis , Joint Instability/surgery , Shoulder Dislocation/surgery , Shoulder Joint/surgery , Arthroplasty, Replacement , Arthroscopy , Humans , Joint Instability/classification , Joint Instability/pathology , Joint Instability/physiopathology , Physical Examination , Range of Motion, Articular , Recurrence , Shoulder Joint/pathology , Shoulder Joint/physiopathologyABSTRACT
Stress dependent electrochemical dissolution is identified as one of the key mechanisms governing surface degradation in fretting and crevice corrosion of biomedical implants. The present study focuses on delineating the roles of mechanical stress and chemical conditions on the life expectancy of modular hip implants. First, material removal on a stressed surface of Ti6Al4V subjected to single asperity contact is investigated experimentally to identify the influence of contact load, in-plane stress and chemical environment on mean wear rates. A range of known stress levels are applied to the specimen while its surface is mechanically stimulated in different non-reactive to oxidizing aqueous environments. Evolution of surface degradation is monitored, and its mechanism is elucidated. This phase allows estimation of Preston Constant which is later used in the analysis. Second phase of the work is semi-analytical and computational, where, based on the estimated Preston constant and other material and process parameters, the scratch propensity (consisting of magnitude of scratch depth and their frequency per unit area) due to micro-motion in modular hip implants is estimated. The third phase views these scratches as initial notches and utilizes a mixed-mode fatigue crack propagation model to estimate the critical crack length for onset of instability. The number of loading cycles needed to reach this critical crack length is then labeled as the expected life of the implant under given mechanical and chemical conditions. Implications of different material and process conditions to life expectancy of orthopedic implants are discussed. It is observed that transverse micro-motion, compared to longitudinal micro-motion, plays a far more critical role in determining the implant life. Patient body weight, as well as proximity of the joint fluid to its iso-electric point play key roles in determining wear rates and associated life expectancies of modular hip implants. Sustained aeration of joint fluid, as well as proper tolerancing of mating surfaces, along with a proper choice of material microstructure may be utilized to extend implant life.
Subject(s)
Environment , Hip , Prostheses and Implants , Stress, Mechanical , Titanium , Alloys , Corrosion , Hardness , Materials Testing , Time Factors , Titanium/chemistryABSTRACT
Er,Cr:YSGG lasers are used clinically in dentistry. The advantages of laser therapy include minimal thermal damage and the alleviation of pain. This study examined whether the Er,Cr:YSGG laser has in vivo and in vitro antinociceptive effects in itself. In capsaicin-evoked acute licking/shaking tests and Hargreaves tests, laser irradiation with an aerated water spray suppressed nociceptive behavior in mice. Laser irradiation attenuated TRPV1 activation by capsaicin in Ca(2+) imaging experiments with TRPV1-overexpressing cells and cultured trigeminal neurons. Therefore, the laser-induced behavioral changes are probably due to the loss of TRPV1 activity. TRPV4 activity was also attenuated, but limited mechanical antinociception by the laser was observed. The laser failed to alter the other receptor functions, which indicates that the antinociceptive effect of the laser is dependent on TRPV1. These results suggest that the Er,Cr:YSGG laser has analgesic effects via TRPV1 inhibition. Such mechanistic approaches may help define the laser-sensitive pain modality and increase its beneficial uses.
Subject(s)
Lasers, Solid-State/therapeutic use , Nociceptors/radiation effects , Pain/prevention & control , TRPV Cation Channels/radiation effects , Animals , Behavior, Animal/drug effects , Behavior, Animal/radiation effects , Calcium Channel Blockers/pharmacology , Calcium Signaling/drug effects , Calcium Signaling/radiation effects , Capsaicin/pharmacology , Dinoprostone/pharmacology , HEK293 Cells , HeLa Cells , Hot Temperature , Humans , Male , Mice , Mice, Inbred ICR , Mice, Knockout , Neurons/drug effects , Neurons/radiation effects , Nociceptors/drug effects , Pain Threshold/radiation effects , Reaction Time/radiation effects , Ruthenium Red/pharmacology , Sensory System Agents/pharmacology , Sensory Thresholds/radiation effects , TRPV Cation Channels/drug effects , Thermosensing/radiation effects , Touch/radiation effects , Trigeminal Nerve/drug effects , Trigeminal Nerve/radiation effectsABSTRACT
Several features of the implant surface, such as roughness, topography and composition play a relevant role in implant integration with bone. This study was conducted in order to determine the effects of various thin layer hydroxyapatite (HA) coatings on anodized Ti surfaces on the biological responses of a human osteoblast-like cell line (MG63). MG63 cells were cultured on 100 nm HA (100 nm HA coating on anodized surface), 500-700 nm HA (500-700 nm HA coating on anodized surface), 1 mum HA (1 mum HA coating on anodized surface) and anodize (non-HA coating on anodized surface) Ti. The morphology of these cells was assessed by scanning electron microscopy (SEM). The cDNAs prepared from the total RNAs of the MG63 were hybridized into a human cDNA microarray (1152 elements). The appearances of the surfaces observed by SEM were different on each of the four dental substrate types. MG63 cells cultured on 100 nm HA, 1 mum HA and anodize exhibited cell-matrix interactions. It was 500-700 nm HA surface showing cell-cell interaction. In the expression of genes involved in osseointegration, several genes, including bone morphogenetic protein 2, latent transforming growth factor beta binding protein 1, catenin (cadherin-associated protein), integrin, PDGFRB and GDF-1 growth differentiation factor 1 were up-regulated on the different surfaces. Several genes, including fibroblast growth factor receptor 3, fibroblast growth factor 12 and CD4 were down-regulated on the different surfaces. The attachment and expression of key osteogenic regulatory genes were enhanced by the surface morphology of the dental materials used.
Subject(s)
Coated Materials, Biocompatible/pharmacology , Dental Implants , Durapatite/pharmacology , Osteoblasts/drug effects , Titanium/chemistry , Cell Survival/drug effects , Gene Expression/drug effects , Humans , Materials Testing/methods , Microscopy, Electron, Scanning , Osseointegration/genetics , Osteoblasts/ultrastructure , Surface PropertiesABSTRACT
During the process of bone formation, titanium (Ti) surface is an important factor in the modulation of osteoblastic function. This study was conducted in order to determine the effects of different Ti surfaces on the biological responses of a human osteoblast-like cell line (MG63). MG63 cells were cultured on smooth (S), sandblasted large-grit and acid etching (SLA), hydroxyapatite (HA), hydroxyfluoride (HF), titanium nitrate (TIN), and diamond-like carbon (DLC) Ti. The morphology of these cells were assessed by SEM. The cDNAs prepared from the total RNAs of the MG63 were hybridized into a human cDNA microarray (1152 elements). The appearances of the surfaces observed by SEM were different on each of the six dental substrate types. The SLA and HA surfaces were determined to be rougher than the others. MG63 cells cultured on SLA and HA exhibited cell-matrix interactions. In the expression of genes involved in osseointegration, several genes, including bone morphogenetic protein, cadherin, integrin, and insulin-like growth factors, were upregulated on the different surfaces. Several genes, including fibroblast growth factor receptor 4, Bcl 2-related protein, and collagen, were downregulated on the different surfaces. The attachment and expression of key osteogenic regulatory genes were enhanced by the surface roughness of the dental materials used.