Evaluation of the Dentinal Shear Bond Strength and Resin Interface in Primary Molars after Pre-Treatment with Various Dentin Bio-Modifiers: An In Vitro Study.

Dentine adhesives have demonstrated great success with permanent teeth. Though the results in primary teeth are not well documented, some studies have demonstrated lower values of bond strength in primary teeth than those found in permanent teeth. The aim of this study was to compare and evaluate the effect of grape seed extract (6.5%) (Herbal Bio Solutions, Delhi, India), glutaraldehyde (5%) (Loba Chemie PVT. LTD., Mumbai), hesperidin (0.5%) (Herbal Bio Solutions, Delhi, India), and casein phosphopeptide-amorphous calcium phosphate (tooth mousse) (GC Corporation, Alsip, IL, USA) on the shear bond strength of dentine of primary teeth and to evaluate the resin tags at the resin tooth interface. Seventy-five caries-free human primary molars were collected, and their occlusal surfaces were ground flat. Dentin surfaces were etched using phosphoric acid. Then teeth were randomly assigned in sequential order to five groups according to the dentinal treatment method: Group I (Control group) (no treatment), Group II (5% glutaraldehyde), Group III (6.5% grape seed extract), Group IV (0.5% hesperidin), and Group V (CPP-ACP). Ten teeth from each group were assigned for Shear Bond Strength and five for SEM analysis. ANOVA and a post hoc least significant difference test (p < 0.05) were used for statistical analysis of the collected data. The grape seed extract group showed significantly increased shear bond strength than the control group (p < 0.05), and the mean length of resin tags in different dentine bio modifiers groups was also statistically significant (p < 0.05). The use of dentin bio modifiers such as 5% glutaraldehyde, 6.5% grape seed extract, 0.5% hesperidin, and CPP-ACP in the bonding process for primary teeth did not improve the dentinal bond strength.

Disinfection Efficacy of Laser Activation on Different Forms and Concentrations of Sodium Hypochlorite Root Canal Irrigant against Enterococcus faecalis in Primary Teeth.

Photoactivated disinfection with sodium hypochlorite (NaOCl) has improved primary root canal treatment outcomes. This in vitro study aims to assess and compare the disinfecting efficacy of 2.5% sodium hypochlorite solution and 5.25% sodium hypochlorite gel, without laser activation and accompanied by laser activation, on Enterococcus faecalis-contaminated primary teeth root canals. After one month of incubating extracted teeth specimens with E. faecalis, 36 specimens were randomly divided into two groups: Group A (conventional method without laser-activated irrigation) and Group B (with laser-activated irrigation). Each group was further divided into three subgroups, with six samples in each subgroup. Subgroup 1 received irrigation with normal saline, Subgroup 2 with 2.5% sodium hypochlorite solution, and Subgroup 3 with 5.25% sodium hypochlorite gel. Diode laser activation at 810 nm was used in Group B. Bacterial colony counts were measured before and after the intervention. Student's t-test and one-way analysis of variance (ANOVA) with Tukey's post hoc test were used for statistical analysis. The significance level was set at p < 0.05. Microbial analysis revealed no bacterial growth in samples irrigated with 5.25% sodium hypochlorite gel activated with the laser. Activation with the laser significantly (p = 0.02) improved the disinfection ability of the irrigant compared to the non-activation group. The disinfection ability of sodium hypochlorite gel was better than that of saline (p = 0.02); however, it was comparable to that of sodium hypochlorite solution (p = 0.67). Conclusion: Root canal irrigation with 5.25% sodium hypochlorite gel activated with an 810 nm diode laser resulted in complete eradication of Enterococcus faecalis, indicating its effectiveness as an endodontic disinfection treatment modality.

Perception of Minimum Interventional Dentistry among Dental Undergraduate Students and Interns.

Background: The philosophy of minimum interventional dentistry (MID) is to integrate prevention, remineralization, and minimal intervention for the placement and replacement of restorations. All branches of dentistry play an important role in practicing MID, and their primary goal is to realize that any restoration is of less biological significance than the healthy original tissue Objectives: The objective of this study was to assess the perception of MID among dental undergraduate students and interns in terms of knowledge, attitude, and practice at the College of Dentistry. Materials and Methods: This cross-sectional study was conducted among undergraduate students and interns at the College of Dentistry, Qassim University, Saudi Arabia. A self-administered questionnaire was distributed, which included basic demographic profiles and questions about the knowledge, attitude, and practices toward MID. The data were tabulated in MS Excel, and all statistical analyses were performed using SPSS version 21. Results: A total of 163 dental students were recruited, with senior students comprising 73% and interns comprising 27%. Male students were slightly more prevalent (50.9%) than female students (49.1%). About 37.6% of participants received training about MID during educational courses, while 10.3% received it during their internship. A statistical test revealed that the prevalence of interns who were trained in performing MID was significantly higher (p < 0.001). Conclusions: The majority of the participants demonstrated proper knowledge, attitude, and practice in different aspects of MID. Interns reported a higher rate of knowledge, attitude, and practice in MID compared to undergraduate students. However, more education and hands-on training about MID concepts during the college curriculum are necessary to attain better knowledge, attitude, and practices that could be useful for more conservative clinical practice.

Mechanical Properties of the Modified Denture Base Materials and Polymerization Methods: A Systematic Review.

Amidst growing technological advancements, newer denture base materials and polymerization methods have been introduced. During fabrication, certain mechanical properties are vital for the clinical longevity of the denture base. This systematic review aimed to explore the effect of newer denture base materials and/or polymerization methods on the mechanical properties of the denture base. An electronic database search of English peer-reviewed published papers was conducted using related keywords from 1 January 2011, up until 31 December 2021. This systematic review was based on guidelines proposed by the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). The search identified 579 papers. However, the inclusion criteria recognized 22 papers for eligibility. The risk of bias was moderate in all studies except in two where it was observed as low. Heat cure polymethyl methacrylate (PMMA) and compression moulding using a water bath is still a widely used base material and polymerization technique, respectively. However, chemically modified PMMA using monomers, oligomers, copolymers and cross-linking agents may have a promising result. Although chemically modified PMMA resin might enhance the mechanical properties of denture base material, no clear inferences can be drawn about the superiority of any polymerization method other than the conventional compression moulding technique.

Team-Based Learning in Prosthodontics Courses: Students' Satisfaction.

The goal of this cross-sectional observational study was to assess dental students' satisfaction regarding team-based learning (TBL) methodology in prosthodontics courses taught at College of Dentistry, Princess Nourah bint Abdulrahman University, Saudi Arabia. Undergraduate dental students at second, third, fourth, and fifth years were taught prosthodontics courses through traditional and TBL pedagogies. TBL sessions consisted of preparation, readiness assurance, and application. At the end of each prosthodontics course, the students were asked to complete a self-administered questionnaire that was divided into four sections to assess the effect of TBL on the following parameters: information acquisition, interpersonal skills improvement, classroom environment, and the students-instructors interaction. The responses of the questionnaire followed the Likert scoring method (scaled from 1 to 5). The t-test and ANOVA statistical analyses were performed using SPSS. Results. The response rate to the questionnaire was 86%. There were a significant relationship and correlation between TBL pedagogy and student satisfaction (P values ≤ 0.05) for all levels. The means of the responses for the second and fifth years were 4.36 and 4.56, respectively, where the means for the third and fourth years were 3.54 and 3.59, respectively. The parameter notably affected by TBL was interpersonal skills enhancement. All students strongly agreed that TBL enhances personal flexibility and boosts their self-esteem. Conclusion. Students showed positive perceptions about TBL pedagogy in terms of active engagement, knowledge acquisition, and improvement of interpersonal skills leading to more efficient learning outcome.

Graphene oxide-based experimental silane primers enhance shear bond strength between resin composite and zirconia.

Despite various mechanical and chemical surface-pretreatment methods, long-term bonding of resin composite to dental zirconia (ZrO2 ) remains a major concern. In this study, graphene oxide (GO) sheets were infused into two commercially available primers and the enclosed mould shear bond strength (EM-SBS) of resin composite to ZrO2 was evaluated. Twelve fully sintered ZrO2 blanks were pretreated and randomly allocated to four groups according to the primers used: RelyX (RX); GO blended RelyX (RXGO); Monobond-S (MB); and GO blended Monobond-S (MBGO). The resin composite stubs were bonded onto the pretreated ZrO2 surfaces and analysed at baseline and after storage in distilled water for 2 and 4 months. The experimental primers blended with GO sheets influenced the surface morphology, visualized as increased surface roughness, and slightly increased the water contact angle measurements. Moreover, the infusion of primers with GO increased the mass fraction (wt%) of carbon and oxygen. The highest EM-SBS values were found for RXGO, with mean (SD) EM-SBS values of 26.4 (3.7) MPa and 21.5 (5.1) MPa after 2 and 4 months of storage, respectively. Infusion of silane primers with nanometre- to micrometre-size GO sheets enhanced the SBS between resin composite and ZrO2 .

Synthesis and characterization of wollastonite glass-ceramics for dental implant applications.

OBJECTIVES: To synthesize a glass-ceramic (GC) that is suitable for non-metallic one-piece dental implant application. METHODS: Three glasses in a SiO2-Al2O3-CaO-CaF2-K2O-B2O3-P2O5-CeO2-Y2O3 system were produced by wet chemistry. Differential thermal analysis (DTA) was carried out to determine the glass crystallization kinetic parameters and the heating schedules that were used for sintering of GCs. Crystalline phases and crystal morphologies were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Mechanical properties of the GCs were determined by ultrasonic and indentation tests and its machinability were evaluated. Chemical durability was carried out according to ISO 6872, whereas testing chemical degradation in tris buffered solution was executed according to ISO 10993-14. RESULTS: XRD of the GC specimens showed that wollastonite was the main crystalline with other secondary phases; GC2 had cristobalite as an additional phase. SEM of the GCs revealed dense acicular interlocking crystals. Young's modulus of elasticity (E), true hardness (Ho) and fracture toughness (KIC) of the GCs were 89-100GPa, 4.85-5.17GPa and 4.62-5.58MPam(0.5), respectively. All GCs were demonstrated excellent machinability. The GCs exhibited various chemical durability and degradation rates. KIC values of the GCs following chemical durability testing were not significantly different from those of the original materials (p>0.05). GC2 exhibited significantly higher KIC value compared with GC1 and GC3 (p<0.05) and its chemical durability satisfied ISO 6872 specification for dental ceramics. SIGNIFICANCE: Wollastonite-cristobalite GC can be considered as a promising material for one-piece dental implant applications due to its strength, machinability and chemical durability.

Synthesis of bioactive and machinable miserite glass-ceramics for dental implant applications.

OBJECTIVES: To synthesize and characterize machinable, bioactive glass-ceramics (GCs) suitable for dental implant applications. METHODS: A glass in the SiO2-Al2O3-CaO-CaF2-K2O-B2O3-La2O3 system was synthesized by wet chemical methods, followed by calcination, melting and quenching. Crystallization kinetics were determined by differential thermal analysis (DTA). GC discs were produced by cold pressing of the glass powder and sintered using schedules determined by DTA. The crystalline phases and microstructure of GC samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Dynamic Young's modulus (E), true hardness (Ho), fracture toughness (KIC) and brittleness index (BI) were evaluated. Bioactivity was studied by examining the formation of hydroxyapatite (HA) on the GC surfaces after soaking in simulated body fluid (SBF). Attachment and proliferation of MC3T3-E1 osteoblastic cells were assessed in vitro. RESULTS: Miserite [KCa5(Si2O7)(Si6O15)(OH)F] was the main crystalline phase of the GC with additional secondary phases. Microstructural studies revealed interlocking lath-like crystalline morphology. E, Ho, and KIC values for the GCs were 96±3 GPa, 5.27±0.26 GPa and 4.77±0.27 MPa m(0.5), respectively. The BI was found to be 1.11±0.05 µm(-0.5), indicating outstanding machinability. An HA surface layer was formed on the GC surfaces when soaked in SBF, indicating potential bioactivity. MC3T3-E1 cells exhibited attachment, spreading and proliferation on GC surfaces, demonstrating excellent biocompatibility. SIGNIFICANCE: We present a novel approach for the synthesis of miserite GC with the physical and biological properties required for non-metallic dental implant applications.