Conversion of Agroindustrial Wastes to Rhamnolipid by Enterobacter sp. UJS-RC and Its Role against Biofilm-Forming Foodborne Pathogens.

Rhamnolipid is the main group of biosurfactants predominantly produced by Pseudomonas aeruginosa, a ubiquitous and opportunistic pathogen, which limits its large-scale exploitation. Thus, cost-effective rhamnolipid production from a newly isolated nonpathogenic Enterobacter sp. UJS-RC was investigated. The highest rhamnolipid production (4.4 ± 0.2 g/L) was achieved in a medium constituting agroindustrial wastes (sugarcane molasses and corn steep liquor) as substrates. Rhamnolipid exhibited reduced surface tension to 72-28 mN/m with an emulsification index of 75%. The structural analyses demonstrated the presence of methoxyl, carboxyl, and hydroxyl groups in rhamnolipid. Mass spectra indicated eight rhamnolipid congeners, where dirhamnolipid (m/z 650.01) was the dominant congener. Rhamnolipid inhibited biofilm formation of Staphylococcus aureus in a dose-dependent manner, supported by scanning electron microscopy disclosing the disruption of the microcolony/exopolysaccharide matrix. Rhamnolipid's ability to generate reactive oxygen species has thrown light on the mechanism through which the killing of test bacteria may occur.

Recent developments in Polyhydroxyalkanoates (PHAs) production - A review.

Polyhydroxyalkanoates (PHAs) are inevitably a key biopolymer that has the potential to replace the conventional petrochemical based plastics that pose jeopardy to the environment globally. Even then the reach of PHA in the common market is so restricted. The economy of PHA is such that, even after several attempts the overall production cost seems to be high and this very factor surpasses PHAs usage when compared to the conventional polymers. The major focus of the review relies on the synthesis of PHA from Mixed Microbial Cultures (MMCs), through a 3-stage process most probably utilizing feedstocks from waste streams or models that mimic them. Emphasis was given to the works carried out in the past decade and their coherence with each and every individual criteria (Aeration, Substrate and bioprocess parameters) such that to understand their effect in enhancing the overall production of PHA.

Polyhydroxy butyrate production by Acinetobacter junii BP25, Aeromonas hydrophila ATCC 7966, and their co-culture using a feast and famine strategy.

The study aimed to evaluate biopolymer production using two bacterial strains, Acinetobacter junii BP25 and Aeromonas hydrophila ATCC 7966, and their co-culture. Batch experiments were evaluated using acetate and butyrate as carbon sources in feast and famine strategy. Feast phase was studied using carbon, nitrates and phosphate in the ratio of 100:8:1 and famine phase was limited with the phosphate and nitrates. Co-culture resulted in highest specific growth rate (0.30 h-1) in the feast phase and the famine phase accounted the maximum polyhydroxybutyrate (PHB) accumulation (2.46 g PHB/L), followed by Acinetobacter junii BP25 (0.25 h-1 and 1.82 g PHB/L) and Aeromonas hydrophila ATCC 7966 (0.17 h-1 and 1.12 g PHB/L). Fourier-transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance spectroscopy (NMR) structural analysis confirmed as PHB. PHB production using the co-culture could be integrated with biohydrogen process using volatile fatty acids (VFA) as a carbon source in the biorefinery framework.

Bioprocess optimization and production of biosurfactant from an unexplored substrate: Parthenium hysterophorus.

Biosurfactants are one among the best alternative for synthetic surfactants that are exploited by many researchers. Several agro wastes help to reduce the cost biosurfactants by being renewable and economical. The present research focuses on the biosurfactant production from Pseudomonas mosselii utilizing Parthenium hysterophorus as a relatively cheap substrate. P. hysterophorus being a hazardous weed, its eradication is quite tedious. So, the utilization of the weed for useful purposes serves as a choice to overcome the problems posed by the weed. In the study, this weed has been successfully utilized as a substrate and the optimized fermentative production of biosurfactant was done. From one-factor-at a-time analysis it was known that the substrate level of 3% incubation time of 96 h, pH 6.0, temperature 35 °C, glucose and yeast extract was found to be the best C and N sources for a high yield. The extracted biosurfactant was partially purified and characterized using FTIR. The biosurfactant produced from the weed could help to render the milestone for distinct biomedical and other applications.

Polyhydroxyalkanoate production from statistically optimized media using rice mill effluent as sustainable substrate with an analysis on the biopolymer's degradation potential.

The present study focuses on the optimization of the bioprocess for the fermentative production of polyhydroxyalkanoate (PHA) by Acinetobacter junii BP 25 using rice mill effluent as a cheap substrate, henceforth to develop an economically feasible biopolymer production process. Statistical tools like Plackett-Burman design (PBD) and Response Surface Methodology (RSM) were used to evaluate the important variables that influence the yield of PHA. Initially from PBD three factors (glycerol, KH2PO4 and incubation time) were taken for further optimization using Box-Behnken design where, the interaction between each of the factors were studied in detail, providing a final optimized media for the high concentration of PHA. Before the optimization process the concentration of PHA was 0.52 ±â€¯0.05 g/l for 1.07 ±â€¯0.32 g/l cell dry mass (CDM) after which a 5.84 fold increase in PHA concentration was observed with 3.04 g/l of PHA. Biodegradation studies of the produced PHA sheets were investigated briefly in both terrestrial and aquatic ecosystem, showing degradation within 8 weeks in soil and 4 weeks in water which was very promising, as the non-degrading property of the conventional plastic have made scientist to research on biopolymers mainly.

Anthelmintic efficacy of glycolipid biosurfactant produced by Pseudomonas plecoglossicida: an insight from mutant and transgenic forms of Caenorhabditis elegans.

The current research focuses on the production and characterization of glycolipid biosurfactant (GB) from Pseudomonas plecoglossicida and its anthelmintic activity against Caenorhabditis elegans. The GB was purified and characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography and Mass Spectrometry (GC-MS) analysis. Anthelmintic activity of GB was studied at six different pharmacological doses from 10 to 320 µg/mL on C. elegans. Exposure of different developmental stages (L1, L2, L3, L4 and adult) of C. elegans to the GB reduced the survivability of worms in a dose and time-dependent manner. Adult and L4 worms were least susceptible, while L1, L2 and L3 were more susceptible to GB when compared to the untreated control. An increased exposure period drastically reduced the survival rate of worms and reduction in LC50 value. The GB significantly inhibited the development of C. elegans with an IC50 value of 53.14 µg/mL and even reduced the adult body length and egg hatching. Fecundity rate of the worms treated with GB at 20, 40 and 80 µg/mL decreased from 261.90 ± 3.21 to 239.70 ± 5.58, 164.20 ± 5.94 and 44.80 ± 6.22 eggs per worm, respectively. Besides the toxicological effects, prolonged exposure to GB significantly decreased (p ≤ 0.0001) the lifespan of wild type worms under standard laboratory conditions. Additionally, GB was found to be lethal towards ivermectin and albendazole resistant C. elegans strains. Overall, the data indicated that the GB extracted from P. plecoglossicida could be utilized for the control of non-susceptible and resistant gastrointestinal nematodes towards broad spectrum anthelmintic drugs, ivermectin and albendazole.

Bioprocess optimization of PHB homopolymer and copolymer P3 (HB-co-HV) by Acinetobacter junii BP25 utilizing rice mill effluent as sustainable substrate.

The potential use of parboiled rice mill effluent as a cheap substrate for the production of homopolymer and copolymer of Polyhydroxyalkanoates (PHAs) by Acinetobacter junii BP 25 was investigated for the first time. Process optimization by one factor at a time led to homopolymer polyhydroxybutyrate (PHB) production of 2.64 ± 0.18 g/l with 94.28% PHB content using a two-stage batch cultivation mode. BP 25 furthermore produced polyhydroxybutyrate-co-hydroxyvalerate (P3 (HB-co-HV)), with the addition of valeric acid as an additive to the substrate, yielding (2.56 ± 0.12 g/l dry biomass, 2.20 ± 0.15 g/l PHA) a copolymer content of 85.93%. Thus, rice mill effluent can be an effective and relatively low-cost alternative for the production of PHA, replacing the pure substrates.