Exploring Immersion Coating as a Cost-Effective Method for Small-Scale Production of Enteric-Coated Gelatin Capsules.

The coating process for solid dosage forms is widely used in the pharmaceutical industry but presents challenges for small-scale production, needed in personalized medicine and clinical or galenic settings. This study aimed to evaluate immersion coating, a cost-effective small-scale method, for enteric-coated gelatin capsules using standard equipment. Two enteric coating polymers and different polymer concentrations were tested, along with API solubility. Results were compared with commercially available enteric capsule shells. Successful preparation of enteric coating capsules via immersion necessitates a comprehensive grasp of API and enteric polymer behavior. However, utilizing commercially available enteric capsule shells does not guarantee ease or robustness, as their efficacy hinges on the attributes of the active ingredient and excipients. Notably, coating with Eudragit S100 stands out for its superior process robustness, requiring minimal or no development time, thus representing the best option for small-scale enteric capsule production.

Sodium lauryl sulfate as lubricant in tablets formulations: Is it worth?

Lubricants are excipients used in tablet formulations to reduce friction and adhesion forces within the die or on the punches surface during the manufacturing process. Despite these excipients are always required for the tablets production, their amount must be carefully evaluated since lubricants can negatively impact on mechanical strength, disintegration and dissolution behavior of solid dosage forms. Alternative compounds have been suggested to overcome the issues of conventional lubricants and sodium lauryl sulfate (SDS) is one of the most promising one. Despite SDS has been object of several investigations, a definitive conclusion on its effectiveness cannot still be drawn. Particularly, its efficacy on tablets disaggregation and API dissolution is still unclear. Here, the effect of SDS on all the relevant features of tablets and tableting process has been evaluated on immediate release hydrophobic tablets formulations in comparison with conventional lubricants. The results of this investigation are quite outspoken: SDS has a low lubricant power while it determines only a limited improvement on tablets hardness. It greatly improves the tablets wettability but only on model formulations, the presence of superdisintegrants resets its effectiveness and any possible effect on tablets disaggregation. None of the tested formulations showed improvement on the API dissolution rate.

Factors affecting the rheological behaviour of carbomer dispersions in hydroalcoholic medium: Towards the optimization of hand sanitiser gel formulations.

Hand sanitizers represent a primary measure for the prevention of transmissible infections, whose use has been greatly increased during CoViD-19 pandemic. Most of the commercially available products are hydrogels, employing carbomers as thickening agents. However, few information is still available regarding performances of carbomers in hydroalcoholic media containing a percentage of alcohols ≥ 60% v/v as recommended for disinfection. The aim of this study was to investigate the colloidal behaviour of carbomer 974 and carbomer 980 in hydroalcoholic media containing from 50 to 80% w/w of alcohol (ethanol or isopropanol) and neutralised with triethanolamine or aminomethyl propanol. Both carbomers provide transparent hydrogels in water, but carbomer 980 should be preferred for the formulation of hydrogel with a percentage of alcohol ≥ 50% w/w for its better solvation. The critical alcohol concentration (CAlC), above which polymer precipitation occurs, depends on the type of alcohol and base used. Carbomer dispersions with a higher content of alcohol can be prepared using aminomethyl propanol rather than triethanolamine. The choice of the more suitable components is fundamental for the isopropanol-based dispersions since the CAlC is closer to the recommended concentrations for disinfection. Overall, these results provide helpful insights for the correct preparation of alcohol-based hand sanitizers using carbomers.