Biosorption of Cr(VI) by Theobroma cacao pericarp.

This paper reports a comprehensive study of Theobroma cacao pericarp (TCP) residues, which has been prepared, characterized, and tested as an inexpensive and efficient biosorbent of Cr(VI) from aqueous solutions. The maximum adsorption capacity of TCP obtained at optimal conditions (pH = 2, dose = 0.5 g L-1, C0 = 100 mg L-1) was qmax = 48.5 mg g-1, which is one of the highest values reported by the literature. Structural and morphological characterization has been performed by FTIR, SEM/EDX, and pHPZC measurements. FTIR analysis revealed the presence of O-H, -NH, -NH2, C = H, C = O, C = C, C-O, and C-C functional groups that would be involved in the Cr(VI) biosorption processes. The experimental equilibrium data of biosorption process were successfully fitted to non-linear Langmuir (R2 = 0.95, χ2 = 11.0), Freundlich (R2 = 0.93, χ2 = 14.8), and Temkin (R2 = 0.93, χ2 = 14.7) isotherm models. Kinetics experimental data were well adjustment to non-linear pseudo-2nd (R2 = 0.99, χ2 = 2.08)- and pseudo-1st-order kinetic models (R2 = 0.98, χ2 = 2.25) and also to intra-particle Weber-Morris (R2 = 0.98) and liquid film diffusion (R2 = 0.99) models. These results indicate that Cr(VI) biosorption on heterogeneous surfaces as well as on monolayers of TCP would be a complex process controlled by chemisorption and physisorption mechanisms. The thermodynamic results indicate that the Cr(VI) biosorption on TCP is a feasible, spontaneous, and endothermic process. TCP can be regenerated with NaOH and reused up to 3 times.

Microwave-Assisted Synthesis of Flower-like MnMoO4 Nanostructures and Their Photocatalytic Performance.

This article describes an affordable method for the synthesis of MnMoO4 nanoflowers through the microwave synthesis approach. By manipulating the reaction parameters like solvent, pH, microwave power, and irradiation duration along this pathway, various nanostructures can be acquired. The synthesized nanoflowers were analyzed by using a powder X-ray diffractometer (XRD), field emission scanning electron microscopy (FE-SEM) with energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), and UV-vis diffuse reflectance spectroscopy (UV-DRS) to determine their crystalline nature, morphological and functional group, and optical properties, respectively. X-ray photoelectron spectroscopy (XPS) was performed for the examination of elemental composition and chemical states by qualitative and quantitative analysis. The results of the investigations demonstrated that the MnMoO4 nanostructures with good crystallinity and distinct shape were formed successfully. The synthesized MnMoO4 nanoflowers were tested for their efficiency as a photocatalyst in the degradation studies of methylene blue (MB) as model organic contaminants in an aqueous medium under visible light, which showed their photocatalytic activity with a degradation of 85%. Through the band position calculations using the electronegative value of MnMoO4, the photocatalytic mechanism of the nanostructures was proposed. The results indicated that the effective charge separation, and transfer mechanisms, in addition to the flower-like shape, were responsible for the photocatalytic performance. The stability of the recovered photocatalyst was examined through its recyclability in the degradation of MB. Leveraging MnMoO4's photocatalytic properties, future studies may focus on scaling up these processes for practical and large-scale environmental remediation.

Effective Removal of Cd(II) from Aqueous Solutions Using Theobroma cacao Agro-Industrial Waste.

Theobroma cacao agro-industrial waste (WTC) has been characterized and tested as an effective biosorbent to remove Cd(II) from aqueous media. At the optimum pH of 5.0, a maximum adsorption capacity of qe,max = 58.5 mg g-1 was determined. The structural and morphological characterization have been conducted by FTIR, SEM/EDX, and TGA measurements. The SEM/EDX results confirmed that the metals are adsorbed on the surface. C-O-C, OH, CH, NH, and C=O functional groups were identified by FTIR. TGA results were consistent with the presence of hemicellulose. Biosorption kinetics were rapid during the first 30 min and then reached equilibrium. The corresponding experimental data were well fitted to pseudo-first and -second order models, the latter being the best. The biosorption isotherm data were also well fitted to Temkin, Langmuir, and Freundlich models, showing that several sorption mechanisms may be involved in the Cd(II) biosorption process, which was characterized as exothermic (ΔH0 < 0), feasible, and spontaneous (ΔG0 < 0). In binary (Cd-Pb and Cd-Cu) and ternary (Cd-Pb-Cu) systems, Cu(II) and particularly Pb(II) co-cations exert strong antagonistic effects. Using HNO3, effective good regeneration of WTC was obtained to efficiently remove Cd(II) up to three times.

Single and Binary Removals of Pb(II) and Cd(II) with Chemically Modified Opuntia ficus indica Cladodes.

In this study, cladodes of Opuntia ficus indica (OFIC), chemically modified with NaOH (OFICM), have been prepared, characterized, and tested as an effective biomass to remove Pb(II) and/or Cd(II) from aqueous media. At an optimum pH of 4.5, the adsorption capacity, qe, of treated OFICM was almost four times higher than that of untreated OFIC. The maximum adsorption capacities (qmax) in the single removal of Pb(II) and Cd(II) were 116.8 and 64.7 mg g-1, respectively. These values were 12.1% and 70.6% higher than those for the corresponding qmax in binary removal, which indicates the strong inhibitive effect of Pb(II) on the co-cation Cd(II) in a binary system. Structural and morphological characterization have been carried out by FTIR, SEM/EDX, and point of zero charge (pHPZC) measurements. The SEM/EDX results confirmed that the metals are adsorbed on the surface. The presence of C-O, C=O, and COO- functional groups were identified by FTIR on both OFIC and OFICM surfaces. On the other hand, we found that the adsorption processes followed the pseudo-second-order kinetics for both single and binary systems, with a fast biosorption rate of Pb(II) and Cd(II). The equilibrium data (adsorption isotherms) were better described by Langmuir and modified-Langmuir models for single and binary systems, respectively. A good regeneration of OFICM was obtained with an eluent of 0.1 M HNO3. Therefore, OFICM can be efficiently reused to remove Pb or Cd, up to three times.