Preparation and characterization of bis-phosphonated polycarbohydrates.

A simple, cost-effective, one-pot method was proposed to introduce bis-phosphonic groups onto alginic acid and carboxymethyl cellulose (CMC). New derivatives were characterized by means of nuclear magnetic resonance, X-ray photoelectron, and attenuated total reflectance Fourier transform infrared spectroscopy. These analyses confirmed the successful transformation of carboxylic groups present in alginic acid and CMC into bis-phosphonic groups. Additionally, thermogravimetric analysis coupled with differential scanning calorimetry was employed to investigate the thermal properties of the bis-phosphonic derivatives of alginate and CMC. The results clearly demonstrate the char-forming ability of both studied bis-phosphonated polycarbohydrates, suggesting their potential as intumescent materials.

Tailoring Physicochemical Properties of V2O5 Nanostructures: Influence of Solvent Type in Sol-Gel Synthesis.

The influence of different solvents, including aqueous and nonaqueous types, on the physicochemical properties of V2O5 nanostructures was thoroughly investigated. Various characterization techniques, such as XRD, XPS, FTIR, Raman spectroscopy, UV-vis DRS, SEM, TEM, and BET, were employed to analyze the obtained materials. Additionally, the adsorption properties of the synthesized V2O5 nanostructures for methylene blue were examined, and kinetic parameters of adsorption were calculated. The results demonstrate that the morphology of the obtained crystals can be finely controlled by manipulating water concentration in the solution, showcasing its profound impact on both the structural characteristics and adsorption properties of the nanostructures. Furthermore, the structural changes of the resulting V2O5 material induced by solvents show strong impacts on its photocatalytic properties, making it a promising photocatalyst.

An effective antibiofilm strategy based on bacteriophages armed with silver nanoparticles.

The emerging antibiotic resistance in pathogenic bacteria is a key problem in modern medicine that has led to a search for novel therapeutic strategies. A potential approach for managing such bacteria involves the use of their natural killers, namely lytic bacteriophages. Another effective method involves the use of metal nanoparticles with antimicrobial properties. However, the use of lytic phages armed with nanoparticles as an effective antimicrobial strategy, particularly with respect to biofilms, remains unexplored. Here, we show that T7 phages armed with silver nanoparticles exhibit greater efficacy in terms of controlling bacterial biofilm, compared with phages or nanoparticles alone. We initially identified a novel silver nanoparticle-binding peptide, then constructed T7 phages that successfully displayed the peptide on the outer surface of the viral head. These recombinant, AgNP-binding phages could effectively eradicate bacterial biofilm, even when used at low concentrations. Additionally, when used at concentrations that could eradicate bacterial biofilm, T7 phages armed with silver nanoparticles were not toxic to eukaryotic cells. Our results show that the novel combination of lytic phages with phage-bound silver nanoparticles is an effective, synergistic and safe strategy for the treatment of bacterial biofilms.

Bovine Serum Albumin - Hydroxyapatite Nanoflowers as Potential Local Drug Delivery System of Ciprofloxacin.

Introduction: Hybrid nanoflowers are structures consisting of organic (enzymes, proteins, nucleic acids) and inorganic components (mostly metal phosphates) with a flower-like hierarchical structure. Novel hybrid nanoflowers based on bovine serum albumin (BSA) and hydroxyapatite (HA) were obtained and characterized. Study on BSA-HA nanoflowers as potential drug delivery system is reported for the first time. Methods: Embedding ciprofloxacin in the structure of hybrid nanoflowers was confirmed by ATR-FTIR and thermogravimetric analysis. The inorganic phase of the nanoflowers was determined by X-ray diffraction. UV‒Vis spectroscopy was used to evaluate the release profiles of ciprofloxacin from nanoflowers in buffer solutions at pH 7.4 and 5. The agar disk diffusion method was used to study the antibacterial activity of the synthesized nanoflowers against Staphylococcus aureus and Pseudomonas aeruginosa. Results: Bovine serum albumin - hydroxyapatite nanoflowers were obtained with diameters of ca. 1-2 µm. The kinetics of ciprofloxacin release from nanoflowers were described by the Korsmeyer-Peppas model. The antibacterial activity of the synthesized nanoflowers was demonstrated against S. aureus and P. aeruginosa, two main pathogens found in osteomyelitis. Conclusion: The formulated nanoflowers may act as an efficient local antibiotic delivery system. Due to the use of nonhazardous, biodegradable components and benign synthesis, hybrid nanoflowers are very promising drug delivery systems that could be applied in the treatment of skeletal system infections.

DNA-based molecular recognition system for lactoferrin biosensing.

The paper describes the development of a novel DNA oligonucleotide-based affinity bioreceptor that binds to lactoferrin, a glycoprotein-type immunomodulator. The research was performed using surface plasmon resonance method to investigate affinity of various types of oligonucleotides to the target protein. The 72 base pair-long 5'[(TAGAGGATCAAA)AAA]4TAGAGGATCAAA3' sequence with the highest affinity to lactoferrin was selected for further investigations. Kinetic analysis of the interaction between selected DNA and lactoferrin provided rate and equilibrium constants: ka = (2.49 ± 0.03)∙104 M-1∙s-1, kd = (1.89 ± 0.02)∙10-3 s-1, KA = (0.13 ± 0.05)∙108 M-1, and KD = (7.61 ± 0.18)∙10-8 M. Thermodynamic study conducted to determine the ΔH0, ΔS0, and ΔG0 for van't Hoff characteristic in the temperature range of 291.15-305.15 K, revealed the complex formation as endothermic and entropically driven. The chosen DNA sequence's selectivity towards lactoferrin was confirmed with interferents' response constituting <3 % of the response to lactoferrin. SPR analysis justified utility of the designed DNA oligonucleotide for Lf determination, with LOD of 4.42∙10-9 M. Finally, the interaction between lactoferrin and DNA was confirmed by electrochemical impedance spectroscopy, providing the basis for further quantitative assay of lactoferrin using the developed DNA-based bioreceptor. The interactions were performed under immobilized DNA ligand conditions, thus reflecting the sensor's surface, which facilitates their transfer to other label-free biosensor technologies.

Insight into continuous glucose monitoring: from medical basics to commercialized devices.

According to the latest statistics, more than 537 million people around the world struggle with diabetes and its adverse consequences. As well as acute risks of hypo- or hyper- glycemia, long-term vascular complications may occur, including coronary heart disease or stroke, as well as diabetic nephropathy leading to end-stage disease, neuropathy or retinopathy. Therefore, there is an urgent need to improve diabetes management to reduce the risk of complications but also to improve patient's quality life. The impact of continuous glucose monitoring (CGM) is well recognized, in this regard. The current review aims at introducing the basic principles of glucose sensing, including electrochemical and optical detection, summarizing CGM technology, its requirements, advantages, and disadvantages. The role of CGM systems in the clinical diagnostics/personal testing, difficulties in their utilization, and recommendations are also discussed. In the end, challenges and prospects in future CGM systems are discussed and non-invasive, wearable glucose biosensors are introduced. Though the scope of this review is CGMs and provides information about medical issues and analytical principles, consideration of broader use will be critical in future if the right systems are to be selected for effective diabetes management.

Effect of dendrimer-based interlayers for enzyme immobilization on a model electrochemical sensing system for glutamate.

In this paper, we discuss dendrimer usage in enzyme-based electrochemical biosensors, particularly with respect to biomolecule loading on the sensing surface. A novel approach to design bioactive layers with immobilized enzymes for electrochemical biosensors using the surface plasmon resonance (SPR) method in combination with electrochemical impedance spectroscopy was presented. The gold surface was modified with linear linkers (various mercaptoalkanoic acids and aminoalkanethiols) and poly(amidoamine) dendrimers from the first- to fifth-generation. The best functionalization procedure was established by detailed SPR studies and transferred onto gold electrodes to electrochemically examine the model enzymatic reaction catalysed by glutamate oxidase. In the case of the chronoamperometric method, the determined sensitivity was 3.36 ± 0.08 µA∙mM-1, and the low limit of detection (LOD) was 1.52 µM. Comparing the sensitivity and LOD obtained for CV measurements, the values of these parameters were 2.5 times higher and 4 times lower, respectively, for the fourth-generation dendrimer-based biosensor and the biosensor with a linear linker. The positive impact of the dendrimer interlayer on the long-term enzyme activity was also confirmed. The research results indicate the possibility of a significant increase in the sensor response using the dendrimer itself without enriching it with electrochemical components.

Biosensor based on coupled enzyme reactions for determination of arginase activity.

The determination of the enzymatic activity requires constant and reproducible measuring conditions, therefore highly stable potentiometric biosensor operating on the basis of coupled enzyme reactions is proposed for arginase activity determination. Glassy carbon electrode was covered with polyazulene ion-to-electron transducing layer, which ensured improved stability of the prepared sensor. The sensor's selectivity was obtained by applying NH4+-selective membrane on the transducing layer, which was further biofunctionalized with urease via covalent immobilization. The immobilized urease served as an auxiliary enzyme in the arginase-urease coupled enzyme assay. Thanks to obtained high stability (low drift coefficient âˆ¼ 0.9 mV/h) and short response time (36 s), the developed urea biosensor enabled continuous monitoring the coupled enzyme reactions indirectly, through measurement the ammonium ion concentration. Arginase activity and Michaelis-Menten constant for arginine-arginase pair under defined experimental conditions, in particular constant concentration of manganese ions, was determined. Mathematical description of the coupled enzyme reactions kinetics is discussed and used to analyse the reactions with auxiliary enzyme immobilized on the electrode surface. The proposed method of determining arginase activity with use of highly stable potentiometric urease-based biosensor, allows obtaining results in the units of absolute arginase activity.

Highly Stable Potentiometric (Bio)Sensor for Urea and Urease Activity Determination.

There is growing interest for bioanalytical tools that might be designed for a specific user, primarily for research purposes. In this perspective, a new, highly stable potentiometric sensor based on glassy carbon/polyazulene/NH4+-selective membrane was developed and utilized for urease activity determination. Urease-urea interaction studies were carried out and the Michaelis-Menten constant was established for this enzymatic reaction. Biofunctionalization of the ammonium ion-selective sensor with urease lead to urea biosensor with remarkably good potential stability (drift coefficient ~0.9 mV/h) and short response time (t95% = 36 s). The prepared biosensor showed the Nernstian response (S = 52.4 ± 0.7 mV/dec) in the urea concentration range from 0.01 to 20 mM, stable for the experimental time of 60 days. In addition, some insights into electrical properties of the ion-to-electron transducing layer resulting from impedance spectroscopy measurements are presented. Based on the RCQ equivalent circuits comparison, it can be drawn that the polyazulene (PAz) layer shows the least capacitive behavior, which might result in good time stability of the sensor in respect to response as well as potential E0. Both the polyazulene-based solid-contact ion selective electrodes and urea biosensors were successfully used in trial studies for determination of ammonium ion and urea in human saliva samples. The accuracy of ammonium ion and urea levels determination by potentiometric method was confirmed by two reference spectrophotometric methods.

Synthesis of Phosphonated Carbon Nanotubes: New Insight into Carbon Nanotubes Functionalization.

Carbon nanotubes were successfully functionalized for the first time in a free radical phosphonylation reaction. Three synthetic protocols were proposed. Carbon nanotubes and diethylphosphite reacted in the presence of known radical initiator, such as azobisisobutyronitrile, single electron oxidant-Mn(OAc)3, or under UV radiation. The functionalized material was fully characterized by means of spectroscopic methods, together with microscopic, surface area and thermogravimetric analyses. UV-illumination was found to be the most effective approach for introducing phosphonates onto carbon nanotubes. X-ray photoelectron spectroscopy analysis showed 6% phosphorus in this sample. Moreover, the method was performed at room temperature for only one hour, using diethylphosphite as a reactant and as a solvent. The functionalized carbon nanotubes showed an improved thermal stability, with a decomposition onset temperature increase of more than 130 °C. This makes it very promising material for flame retarding applications.

Potentiometric Solid-Contact Ion-Selective Electrode for Determination of Thiocyanate in Human Saliva.

A new solid-contact potentiometric ion-selective electrode for the determination of SCN- (SCN-ISE) has been described. Synthesized phosphonium derivative of calix[4]arene was used as a charged ionophore. The research included selection of the ion-selective membrane composition, determination of the ISEs metrological parameters and SCN-ISE application for thiocyanate determination in human saliva. Preparation of the ISEs included selection of a plasticizer for the ion-selective membrane composition and type of the electrode material. The study was carried out using ISE with liquid internal electrolyte (LE-ISE) and solid-contact electrodes made of glassy carbon (GC-ISE) and gold rods (Au-ISE). The best parameters were found for GC sensors for which the ion-selective membrane contained chloroparaffin as a plasticizer (S = 59.9 mV/dec, LOD = 1.6 ´ 10-6 M). The study of potentiometric selectivity coefficients has shown that the thiocyanate-selective sensor could be applied in biomedical research for determination of SCN- concentration in human saliva. The accuracy of the SCN- determination was verified by testing 59 samples of volunteers' saliva by potentiometric sensors and UV-Vis spectrophotometry as a reference technique. Moreover, SCN- concentrations in the smokers' and non-smokers' saliva were compared. In order to investigate the influence of various factors (sex, health status, taken medications) on the thiocyanate level in the saliva, more extensive studies on a group of 100 volunteers were carried out. Additionally, for a group of 18 volunteers, individual profiles of SCN- concentration in saliva measured on a daily basis for over a month were collected.

Tailoring the Size and Shape-New Path for Ammonium Metavanadate Synthesis.

Ammonium metavanadate, NH4VO3, plays an important role in the preparation of vanadium oxides and other ammonium compounds, such as NH4V3O8, (NH4)2V3O8, and NH4V4O10, which were found to possess interesting electrochemical properties. In this work, a new route for the synthesis of NH4VO3 is proposed by mixing an organic ammonium salt and V2O5 in a suitable solvent. The one-step procedure is carried out at room temperature. Additionally, the need for pH control and use of oxidants necessary in known methods is eliminated. The mechanism of the NH4VO3 formation is explained. It is presented that it is possible to tailor the morphology and size of the obtained NH4VO3 crystals, depending on the combination of reagents. Nano- and microcrystals of NH4VO3 are obtained and used as precursors in the hydrothermal synthesis of higher ammonium vanadates. It is proven that the size of the precursor particles can significantly affect the physical and chemical properties of the resulting products.