Experimental and Theoretical Insights on the Structural, Electronic, and Magnetic Properties of the Quaternary Selenides EuPrCuSe3 and EuNdCuSe3.

Magnetic semiconductors EuPrCuSe3 and EuNdCuSe3 were obtained by using the halide flux method. Their crystal structures and magnetic properties were studied and discussed. Optical properties of the obtained selenides were studied by the means of diffuse reflectance spectroscopy, which revealed the values of 1.92/1.97 and 0.90/0.94 eV for the direct and indirect band gaps of Ln = Nd/Pr, respectively. The structural, electronic, and magnetic properties of the obtained compounds were additionally studied with spin-polarized density functional theory calculations, wherein both systems were found to be two new examples of semiconducting quaternary selenides with disperse conduction bands of Nd/Pr 5d character. The modeling showed that various magnetic orderings in the systems have subtle influences on the alignments/overlaps between the Se/Cu, Eu, and Pr/Nd bands, and that the spin-state energetics are very dependent upon the treatment of electron correlation, but a distinguishing feature in the case of ferromagnetic coupling is that the spin density on the Se atoms is maximized. Overall, the calculations are in good agreement with the experimental characterization of ferromagnetism in the bulk crystals, wherein the ferromagnetic transition occurs at temperatures of about 2.5 K for EuPrCuSe3 and about 3 K for EuNdCuSe3.

Genuine quadruple bonds between two main-group atoms. Chemical bonding in AeF- (Ae = Be-Ba) and isoelectronic EF (E = B-Tl) and the particular role of d orbitals in covalent interactions of heavier alkaline-earth atoms.

Quantum chemical calculations of anions AeF- (Ae = Be-Ba) and isoelectronic group-13 molecules EF (E = B-Tl) have been carried out using ab initio methods at the CCSD(T)/def2-TZVPP level and density functional theory employing BP86 various basis sets. The equilibrium distances, bond dissociation energies and vibrational frequencies are reported. The alkali earth fluoride anions AeF- exhibit strong bonds between the closed-shell species Ae and F- with bond dissociation energies between 68.8 kcal mol-1 for MgF- and 87.5 kcal mol-1 for BeF- and they show an unusual increasing trend MgF- < CaF- < SrF- < BaF-. This is in contrast to the isoelectronic group-13 fluorides EF where the BDE continuously decreases from BF to TlF. The calculated dipole moments of AeF- are very large between 5.97 D for BeF- and 1.78 D for BaF- with the negative end always at the Ae atom (Ae→F-). This is explained by the location of the electronic charge of the lone pair at Ae, which is rather distant from the nucleus. The analysis of the electronic structure of AeF- suggests significant charge donation Ae←F- into the vacant valence orbitals of Ae. A bonding analysis with the EDA-NOCV method suggests that the molecules are mainly covalently bonded. The strongest orbital interaction in the anions comes from the inductive polarization of the 2pσ electrons of F-, which leads to a hybridization of the (n)s and (n)pσ AOs at Ae. There are two degenerate π donor interactions Ae←F- in all anions AeF-, which provide 25-30% to the covalent bonding. There is another σ orbital interaction in the anions, which is very weak in BeF- and MgF-. In contrast, the second stabilizing σ orbital interaction in CaF-, SrF- and BaF- yields a strongly stabilizing σ orbital, because the Ae atoms use their (n - 1)dσ AOs for bonding. The energy lowering of the second σ interaction in the latter anions is even stronger than the π bonding. The EDA-NOCV results suggest that BeF- and MgF- have three strongly polarized bonds, whereas CaF-, SrF- and BaF- have four bonding orbitals. The quadruple bonds in the heavier alkaline earth species are made possible because they use s/d valence orbitals like transition metals for covalent bonding. The EDA-NOCV analysis of the group-13 fluorides EF gives a conventional picture with one very strong σ bond and two rather weak π interactions.

Nature of Beryllium, Magnesium, and Zinc Bonds in Carbene⋯MX2 (M = Be, Mg, Zn; X = H, Br) Dimers Revealed by the IQA, ETS-NOCV and LED Methods.

The nature of beryllium−, magnesium− and zinc−carbene bonds in the cyclopropenylidene⋯MX2 (M = Be, Mg, Zn; X = H, Br) and imidazol-2-ylidene⋯MBr2 dimers is investigated by the joint use of the topological QTAIM-based IQA decomposition scheme, the molecular orbital-based ETS-NOCV charge and energy decomposition method, and the LED energy decomposition approach based on the state-of-the-art DLPNO-CCSD(T) method. All these methods show that the C⋯M bond strengthens according to the following order: Zn < Mg << Be. Electrostatics is proved to be the dominant bond component, whereas the orbital component is far less important. It is shown that QTAIM/IQA underestimates electrostatic contribution for zinc bonds with respect to both ETS-NOCV and LED schemes. The σ carbene→MX2 donation appears to be much more important than the MX2→ carbene back-donation of π symmetry. The substitution of hydrogen atoms by bromine (X in MX2) strengthens the metal−carbene bond in all cases. The physical origin of rotational barriers has been unveiled by the ETS-NOCV approach.

Differentiation of isomeric metabolites of carbamazepine based on acid-base properties; Experimental vs theoretical approach.

Metabolism of carbamazepine is complex and leads to the three isomeric derivatives whose occurrence is dependent on the type of sample material. Their unambiguous differentiation is overall important. In this work, the qualitative analysis of 2-hydroxycarbamazepine, 3-hydroxycrbamazepine and carbamazepine-10,11-epoxide was attempted for the first time using capillary zone electrophoresis, based on the models linking electrophoretic mobility with pKa value determining the acidity of the hydroxyl groups. For this purpose, pKa values ​​were determined using electrophoretic and theoretical methods, and then the compliance of the obtained mobility models with the measured values ​​was analyzed. Despite the slight difference in acidity ​​(0.3-0.4 pH unit), the obtained results prove that the correct identification of the metabolites under consideration, and reliable prediction of the selectivity of their separation, are possible on the basis of experimentally determined pKa values, even with highly simplified methods assuming the lack of certain data. However, it is important to choose the optimal pH value, which should be close to pKa. On the other hand, worse results were obtained for the theoretically determined mobilities, which differed significantly from the experimental values. An attempt was also made to explain the acidity of hydroxycarbamazepines and the associated thermodynamic parameters - deprotonation enthalpy and entropy, with respect to their structure. The lack of intramolecular hydrogen bonds and the significant contribution of entropic effects stabilizing the protonated form seems to be significant. The higher pKa value for CBZ-2-OH probably results from the stronger effect of the energetically unfavorable organization of solvent dipoles due to ionization.

Supramolecular structures of NiII and CuII with the sterically demanding Schiff base dyes driven by cooperative action of preagostic and other non-covalent interactions.

This work reports on synthesis and extensive experimental and theoretical investigations on photophysical, structural and thermal properties of the NiII and CuII discrete mononuclear homoleptic complexes [Ni(L I,II)2] and [Cu(L I,II)2] fabricated from the Schiff base dyes o-HOC6H4-CH=N-cyclo-C6H11 (HL I) and o-HOC10H6-CH=N-cyclo-C6H11 (HL II), containing the sterically crowding cyclo-hexyl units. The six-membered metallocycles adopt a clearly defined envelope conformation in [Ni(L II)2], while they are much more planar in the structures of [Ni(L I)2] and [Cu(L I,II)2]. It has been demonstrated by in-depth bonding analyses based on the ETS-NOCV and Interacting Quantum Atoms energy-decomposition schemes that application of the bulky substituents, containing several C-H groups, has led to the formation of a set of classical and unintuitive intra- and inter-molecular interactions. All together they are responsible for the high stability of [Ni(L I,II)2] and [Cu(L I,II)2]. More specifically, London dispersion dominated intramolecular C-H⋯O, C-H⋯N and C-H⋯H-C hydrogen bonds are recognized and, importantly, the attractive, chiefly the Coulomb driven, preagostic (not repulsive anagostic) C-H⋯Ni/Cu interactions have been discovered despite their relatively long distances (∼2.8-3.1 Å). All the complexes are further stabilized by the extremely efficient intermolecular C-H⋯π(benzene) and C-H⋯π(chelate) interactions, where both the charge-delocalization and London dispersion constituents appear to be crucial for the crystal packing of the obtained complexes. All the complexes were found to be photoluminescent in CH2Cl2, with [Cu(L II)2] exhibiting the most pronounced emission - the time-dependent density-functional-theory computations revealed that it is mostly caused by metal-to-ligand charge-transfer transitions.

Origin of Hydrocarbons Stability from a Computational Perspective: A Case Study of Ortho-Xylene Isomers.

It is shown herein that intuitive and text-book steric-clash based interpretation of the higher energy "in-in" xylene isomer (as arising solely from the repulsive CH⋅⋅⋅HC contact) with respect to the corresponding global-minimum "out-out" configuration (where the clashing C-H bonds are tilted out) is misleading. It is demonstrated that the two hydrogen atoms engaged in the CH⋅⋅⋅HC contact in "in-in" are involved in attractive interaction so they cannot explain the lower stability of this isomer. We have proven, based on the arsenal of modern bonding descriptors (EDDB, HOMA, NICS, FALDI, ETS-NOCV, DAFH, FAMSEC, IQA), that in order to understand the relative stability of "in-in" versus "out-out" xylenes isomers one must consider the changes in the electronic structure encompassing the entire molecules as arising from the cooperative action of hyperconjugation, aromaticity and unintuitive London dispersion plus charge delocalization based intra-molecular CH⋅⋅⋅HC interactions.

Formation of active species from ruthenium alkylidene catalysts-an insight from computational perspective.

Ruthenium alkylidene complexes are commonly used as olefin metathesis catalysts. Initiation of the catalytic process requires formation of a 14-electron active ruthenium species via dissociation of a respective ligand. In the present work, this initiation step has been computationally studied for the Grubbs-type catalysts (H2IMes)(PCy3)(Cl)2Ru=CHPh, (H2IMes)(PCy3)(Cl)2Ru=CH-CH=CMe2 and (H2IMes)(3-Br-py)2(Cl)2Ru=CHPh, and the Hoveyda-Grubbs-type catalysts (H2IMes)(Cl)2Ru=CH(o-OiPrC6H4), (H2IMes)(Cl)2Ru=CH(5-NO2-2-OiPrC6H3), and (H2IMes)(Cl)2Ru=CH(2-OiPr-3-PhC6H3), using density functional theory (DFT). Additionally, the extended-transition-state combined with the natural orbitals for the chemical valence (ETS-NOCV) and the interacting quantum atoms (IQA) energy decomposition methods were applied. The computationally determined activity order within both families of the catalysts and the activation parameters are in agreement with reported experimental data. The significance of solvent simulation and the basis set superposition error (BSSE) correction is discussed. ETS-NOCV demonstrates that the bond between the dissociating ligand and the Ru-based fragment is largely ionic followed by the charge delocalizations: σ(Ru-P) and π(Ru-P) and the secondary CH…Cl, CH…π, and CH…HC interactions. In the case of transition state structures, the majority of stabilization stems from London dispersion forces exerted by the efficient CH…Cl, CH…π, and CH…HC interactions. Interestingly, the height of the electronic dissociation barriers is, however, directly connected with the prevalent (unfavourable) changes in the electrostatic and orbital interaction contributions despite the favourable relief in Pauli repulsion and geometry reorganization terms during the activation process. According to the IQA results, the isopropoxy group in the Hoveyda-Grubbs-type catalysts is an efficient donor of intra-molecular interactions which are important for the activity of these catalysts.

Kinetic and Potential Energy Contributions to a Chemical Bond from the Charge and Energy Decomposition Scheme of Extended Transition State Natural Orbitals for Chemical Valence.

This work provides novel physical insight into the nature of a chemical bond by exploring qualitative and quantitative relations between the natural orbitals for chemical valence (NOCV)-based deformation density bonding channels Δρ i ( i = σ, π, δ, etc.) and the corresponding kinetic Δ Ti and potential energy Δ Vi contributions within the charge and energy decomposition scheme ETS-NOCV implemented in the Kohn-Sham-based Amsterdam Density Functional (ADF) package. It is determined that interfragment dative and covalent-type electron charge reorganizations upon formation of a series of strong and weak bonds employing main-group elements are due to lowering of the negative kinetic energy contributions, as opposed to the intrafragment polarizations (e.g., hyperconjugations in ethane), which are, in contrary, driven by the potential energy (electrostatic) component. Complementary, formation of π-contributions in N2 is accompanied by lowering of both kinetic and potential energy constituents. Remarkably, well-known globally stabilizing back-donation (M → ligand, where M is a transition metal) and donation (ligand → M) processes, ubiquitous in organometallic species, have been discovered for the first time to be driven by the opposite Δ Ti/Δ Vi mechanisms, namely, the former contribution is associated with the negative kinetic term (which outweighs the positive potential energy), whereas the latter charge delocalization into electrophilic transition metals leads to an attractive electrostatic stabilization (and positive kinetic energy).

Photobleaching of pheomelanin increases its phototoxic potential: Physicochemical studies of synthetic pheomelanin subjected to aerobic photolysis.

Although melanin is a photoprotective pigment, its elevated photochemical reactivity could lead to various phototoxic processes. Photoreactivity of synthetic pheomelanin, derived from 5-S-cysteinyldopa (5SCD-M) and its photodegradation products obtained by subjecting the melanin to aerobic irradiation with UV-visible light, was examined employing an array of advanced physicochemical methods. Extensive photolysis of 5SCD-M was accompanied by partial bleaching of the melanin, modification of its paramagnetic properties, and significant increase in the ability to photogenerate singlet oxygen. The changes correlated with a substantial decrease in the melanin content of benzothiazine (BT) units and increase of modified benzothiazole (BZ) units. Synthetically prepared BZ exhibited higher efficiency to photogenerate singlet oxygen than the synthetic BT, and the free radical form of BZ, unlike that of BT, did not show measurable spin density on nitrogen atom, which was confirmed by quantum chemical calculations. Formation of modified BZ units in the photobleached 5SCD-M is responsible for the paramagnetic and photochemical changes of the melanin and its elevated phototoxic potential. Given a relatively constant pheomelanin-eumelanin ratio, such undesirable changes could occur in individual of all skin types.

Cyclodextrin-induced acidity modification of substituted cathinones studied by capillary electrophoresis supported by density functional theory calculations.

This paper shows that the acidity of substituted cathinones can change in a diversified and poorly predictable manner upon supramolecular interaction with cyclodextrins used as buffer additives in capillary electrophoresis. The direction and range of pKa shifts may be noticeably different for the particular cyclodextrins and cathinones, suggesting a strict correlation with structure. The most interesting results were observed for 2-hydroxyethyl-ß-cyclodextrin, which is capable for inducing the large negative and enantioselective apparent pKa shifts for α-pyrrolidinovalerophenone and methylenedioxypyrovalerone, even much above -1.0 pH unit. A thermodynamic analysis was performed, to identify the role of enthalpy and entropy in the formation and deprotonation of the respective diastereomeric complexes. The former process turned out to be driven by an energetically favorable increase in entropy, related probably to a hydrophobic effect. Deprotonation enthalpy in the complexed state, in turn, occurred to be more favorable than in the free molecule state, entailing the large drop in pKa after complexation. The DFT calculations allowed us to identify some structural effects that most likely contribute to these phenomena. At last, we have demonstrated that at low cyclodextrin concentration and pH ensuring partial ionization, pKa shifts contribute to chiral separation of the abovementioned cathinones. This analytically important effect may be helpful in anticipating the most efficient chiral separation mechanism of other systems.

Quasi-aromatic Möbius Metal Chelates.

We report the design as well as structural and spectroscopic characterizations of two new coordination compounds obtained from Cd(NO3)2·4H2O and polydentate ligands, benzilbis(pyridin-2-yl)methylidenehydrazone (LI) and benzilbis(acetylpyridin-2-yl)methylidenehydrazone (LII), in a mixture with two equivalents of NH4NCS in MeOH, namely [Cd(SCN)(NCS)(LI)(MeOH)] (1) and [Cd(NCS)2(LII)(MeOH)] (2). Both LI and LII are bound via two pyridyl-imine units yielding a tetradentate coordination mode giving rise to the 12 π electron chelate ring. It has been determined for the first time (qualitatively and quantitatively), using the EDDB electron population-based method, the HOMA index, and the ETS-NOCV charge and energy decomposition scheme, that the chelate ring containing CdII can be classified as a quasi-aromatic Möbius motif. Notably, using the methyl-containing ligand LII controls the exclusive presence of the NCS- connected with the CdII atom (structure 2), while applying LI allows us to simultaneously coordinate NCS- and SCN- ligands (structure 1). Both systems are stabilized mostly by hydrogen bonding, C-H···π interactions, aromatic π···π stacking, and dihydrogen C-H···H-C bonds. The optical properties have been investigated by diffused reflectance spectroscopy as well as molecular and periodic DFT/TD-DFT calculations. The DFT-based ETS-NOCV analysis as well as periodic calculations led us to conclude that the monomers which constitute the obtained chelates are extremely strongly bonded to each other, and the calculated interaction energies are found to be in the regime of strong covalent connections. Intramolecular van der Waals dispersion forces, due to the large size of LI and LII, appeared to significantly stabilize these systems as well as amplify the aromaticity phenomenon.

Thermodynamics of acid-base dissociation of several cathinones and 1-phenylethylamine, studied by an accurate capillary electrophoresis method free from the Joule heating impact.

Capillary electrophoresis is often used to the determination of the acid-base dissociation/deprotonation constant (pKa), and the more advanced thermodynamic quantities describing this process (ΔH°, -TΔS°). Remarkably, it is commonly overlooked that due to insufficient dissipation of Joule heating the accuracy of parameters determined using a standard approach may be questionable. In this work we show an effective method allowing to enhance reliability of these parameters, and to estimate the magnitude of errors. It relies on finding a relationship between electrophoretic mobility and actual temperature, and performing pKa determination with the corrected mobility values. It has been employed to accurately examine the thermodynamics of acid-base dissociation of several amine compounds - known for their strong dependency of pKa on temperature: six cathinones (2-methylmethcathinone, 3-methylmethcathinone, 4-methylmethcathinone, α-pyrrolidinovalerophenone, methylenedioxypyrovalerone, and ephedrone); and structurally similar 1-phenylethylamine. The average pKa error caused by Joule heating noted at 25 °C was relatively small - 0.04-0.05 pH unit, however, a more significant inaccuracy was observed in the enthalpic and, in particular, entropic terms. An alternative correction method has also been proposed, simpler and faster, but not such effective in correcting ΔH°/-TΔS° terms. The corrected thermodynamic data have been interpreted with the aid of theoretical calculations, on a ground of the enthalpy-entropy relationships and the most probable structural effects accounting for them. Finally, we have demonstrated that the thermal dependencies of electrophoretic mobility, modelled during the correction procedure, may be directly used to find optimal temperature providing a maximal separation efficiency.

Ligand-Driven Coordination Sphere-Induced Engineering of Hybride Materials Constructed from PbCl2 and Bis-Pyridyl Organic Linkers for Single-Component Light-Emitting Phosphors.

We report design and structural characterization of six new coordination polymers fabricated from PbCl2 and a series of closely related bis-pyridyl ligands LI and HLII-HLVI, namely, [Pb2(LI)Cl4]n, [Pb(HLII)Cl2]n·nMeOH, [Pb(HLIII)Cl2]n·0.5 nMeOH, [Pb2(LIV)Cl3]n, [Pb(HLV)Cl2]n, and [Pb3(LVI)2Cl4]n·nMeOH. The topology of the obtained networks is dictated by the geometry of the organic ligand. The structure of [Pb2(LI)Cl4]n is constructed from the [PbCl2]n two-dimensional (2D) sheets, linked through organic linkers into a three-dimensional framework, which exhibits a unique binodal 4,7-connected three-periodic topology named by us as sda1. Topological analysis of the 2D metal-organic sheet in [Pb(HLII)Cl2]n·nMeOH discloses a binodal 3,4-connected layer topology, regardless of the presence of tetrel bonds. A one-dimensional (1D) coordination polymer [Pb(HLIII)Cl2]n·0.5 nMeOH is considered as a uninodal 2-connected chain. The overall structure of [Pb2(LIV)Cl3]n is constructed from dimeric tetranuclear [Pb4(µ3-LIV-κ6N:N':N″:µ3-O)2(µ4-Cl)(µ2-Cl)2]3+ cationic blocks linked in a zigzag manner through bridging µ2-Cl- ligands, yielding a 1D polymeric chain. Topological analysis of this chain reveals a unique pentanodal 3,4,4,5,6-connected chain topology named by us as sda2. The structure of [Pb(HLV)Cl2]n exhibits a 1D zigzaglike polymeric chain. Two chains are further linked into a 1D gridlike ribbon through the dimeric [Pb2(µ2-Cl)2Cl2] blocks as bridging nodes. With the bulkiest ligand HLVI, a 2D layered coordination polymer [Pb3(LVI)2Cl4]n·nMeOH is formed, which network, considering all tetrel bonds, reveals a unique heptanodal 3,3,3,3,4,5,5-connected layer topology named by us as sda3. Compounds [Pb2(LI)Cl4]n, [Pb2(LIV)Cl3]n, and [Pb(HLV)Cl2]n were found to be emissive in the solid state at ambient temperature. While blue emission of [Pb2(LI)Cl4]n is due to the ligand-centered transitions, bluish-green and white luminescence of [Pb2(LIV)Cl3]n and [Pb(HLV)Cl2]n, respectively, was assigned to ligand-to-metal charge transfer mixed with metal-centered excited states. Molecular as well as periodic calculations were additionally applied to characterize the obtained polymers.

Origin of Remarkably Different Acidity of Hydroxycoumarins-Joint Experimental and Theoretical Studies.

In the present work the origin of highly varied acidity of hydroxycoumarins (pKa values) has been for the first time investigated by joint experimental and computational studies. The structurally simple regio-isomers differing in the location of hydroxyl group, 3-hydroxycoumarin (3-HC), 4-hydroxycoumarin (4-HC), 6-hydroxycoumarin (6-HC), 7-hydroxycoumarin (7-HC), as well as 4,7-dihydroxycoumarin (4,7-HC) and the larger 4-hydroxycoumarin-based derivatives: warfarin (WAR), 7-hydroxywarfarin (W7), coumatetralyl (CT), and 10-hydroxywarfarin (W10), have been compared in terms of enthalpy-entropy relationships accounting for the observed pKa values. We have revealed that in the case of large molecules the acidic proton is stabilized by the following noncovalent interactions OH···O (WAR and W7), OH···π (CT), and OH···OH···O (W10), this effect leads to a compensatory enthalpy-entropy relation and yields a moderate pKa increase. On the other hand, different location of the hydroxyl group in the regio-isomers (3-HC, 4-HC, 6-HC, and 7-HC) leads to the massive changes in acidity due to a lack of enthalpy-entropy compensation. Our results suggest that the solvent-solute interactions and electron delocalization degree in anions contribute to the observed behaviors. Such knowledge can be useful in the future to design novel systems exhibiting desired acid-base properties, and to elucidate enthalpy-entropy compensation phenomena.

On the Stability of Cis- and Trans-2-Butene Isomers. An Insight Based on the FAMSEC, IQA, and ETS-NOCV Schemes.

In the present account, the real space fragment attributed molecular system energy change (FAMSEC) approach, interacting quantum atoms energy decomposition scheme as well as molecular orbitals based the extended transition state scheme coupled with natural orbitals for chemical valence (ETS-NOCV) have been, for the first time, successfully used to delineate factors of importance for stability of the 2-butene conformers (cis-eq, cis-TS, trans-eq, trans-TS). Our results demonstrate that atoms of the controversial H-H contact in cis-eq (i) are involved in attractive interaction dominated by the exchange-correlation term, (ii) are weekly stabilized, (iii) show trends in several descriptors found in other typical H-bonds, and (iv) are part of most stabilized CH-HC fragment (loc-FAMSEC = -3.6 kcal/mol) with most favourably changed intrafragment interactions on trans-eq→cis-eq. Moreover, lower stability of cis-eq vs. trans-eq is linked with the entire HCCH (ethylenic) fragment which destabilized cis-eq (mol-FAMSEC, +3.9 kcal/mol) the most. Although the H-H contact can be linked with smaller, relative to trans-, rotational energy barrier in cis-2-butene, we have proven that to rationalize this phenomenon one must account for changes in interactions between various fragments that constitute the entire molecule. Importantly, we discovered a number of comparable trends in fundamental properties of equivalent molecular fragments on a methyl group rotation; for example, interaction between BP-free H-atoms in trans-eq (involving CH bonds of the methyl and ethylenic units) and BP-linked H-atoms in cis-eq. Clearly, rotational energy barrier cannot be entirely (i) rationalized by the properties of or (ii) attributed to the H-H contact in cis-eq. © 2016 Wiley Periodicals, Inc.

From Saturated BN Compounds to Isoelectronic BN/CC Counterparts: An Insight from Computational Perspective.

In the present study, the inorganic analogues of alkanes as well as their isoelectronic BN/CC counterparts that bridge the gap between organic and inorganic chemistry are comparatively studied on the grounds of static DFT and Car-Parrinello molecular dynamics simulations. The BN/CC butanes CH3 CH2 BH2 NH3 , BH3 CH2 NH2 CH3 , and NH3 CH2 BH2 CH3 were considered and compared with their isoelectronic counterparts NH3 BH2 NH2 BH3 and CH3 CH2 CH2 CH3 . In addition, systematical replacement of the NH2 BH2 fragment by the isoelectronic CH2 CH2 moiety is studied in the molecules H3 N(NH2 BH2 )3-m (CH2 CH2 )m BH3 (for m=0, 1, 2, or 3) and H3 N(NH2 BH2 )2-m (CH2 CH2 )m BH3 (for m=0, 1, or 2). The DFT and Car-Parrinello simulations show that the isosteres of the BN/CC butanes CH3 CH2 BH2 NH3 , BH3 CH2 NH2 CH3 , and NH3 CH2 BH2 CH3 and of larger oligomers of the type (BN)k (CC)l where k≥l are stable compounds. The BN/CC butane H3 NCH2 CH2 BH3 spontaneously produces molecular hydrogen at room temperature. The reaction, prompted by very strong dihydrogen bonding NH⋅⋅⋅HB, undergoes through the neutral, hypervalent, pentacoordinated boron dihydrogen complex RBH2 (H2 ) [R=(CH2 CH2 )n NH2 ]. The calculations suggest that such intermediate and the other BN/CC butanes CH3 CH2 BH2 NH3 , BH3 CH2 NH2 CH3 , and NH3 CH2 BH2 CH3 as well as larger BN/CC oligomers are viable experimentally. A simple recipe for the synthesis of CH3 CH2 BH2 NH3 is proposed. The strength of the dihydrogen bonding appeared to be crucial for the overall stability of the saturated BN/CC derivatives.

Analytical aspects of achiral and cyclodextrin-mediated capillary electrophoresis of warfarin and its two main derivatives assisted by theoretical modeling.

Several distinct analytical issues have been addressed by performing capillary electrophoresis-based separations of the warfarin, 7-hydroxywarfarin and 10-hydroxywarfarin in an achiral and cyclodextrin-containing media. The measurements were conducted across a range of pH in order to find optimum conditions for achiral and chiral separations. The values of acid dissociation constant (pKa) have been determined and compared. Subsequently, after performing a series of mobility shift assays at different pH and cyclodextrin concentration, the pKa values ascribed to diastereomeric complexes with methyl-ß-cyclodextrin have been estimated. The significant pKa shifts upon complexation have been noticed for warfarin - up to 1.5 pH units, and only subtle for 10-hydroxywarfarin. A new approach that allows the estimation of association percentage based on the electrophoretic mobility curves has been also demonstrated. The complex mechanism of chiral separation has been found to be responsible for the observed migration profile, relying on a combined equilibrium between complexation/partition and protonation/deprotonation phenomena. The occurrence of the pKa-related migration order reversal has been demonstrated in achiral medium between warfarin and 7-hydroxywarfarin, and in chiral medium between enantiomers, causing a drop in enantioselectivity at specific pH. In parallel, the density functional theory-based calculations have been performed in order to obtain the structures of warfarin and its derivatives as well as to rationalize the shifts in pKa values.