A Heat Transfer Model and Supporting Experiments to Guide the Uniform Gelation of Molecular Oleogels During Scale-up.

The quest for novel vegetable oil structuring strategies has been progressing since the discovery of the deleterious impacts of trans fats. Although oleogelation using bioderived molecular gelators has been proven to be successful as an alternative to traditional hydrogenation methods, efforts are needed to meet the industrial requirements. A major constraint during the fabrication of oleogels is to achieve consistency in physical properties during scale-up. Experiments showed that gelation fails to occur when larger volumes were prepared based on the minimum gelation concentration (MGC) of gelators, determined using the smallest oil volume (1 mL), a general laboratory practice. This observation was consistent with all the molecular gelators used in this study; sorbitol dioctanoate, mannitol dioctanoate, and 12-hydroxystearic acid. To understand this behavior, a mathematical model was developed since gelator network propagation is governed by the cooling rate. The model indicates that maintenance of a minimal thermal gradient via uniform heat dissipation and gelation time is necessary to achieve homogeneous gel propagation across the vial. With these predictions, we hypothesized and confirmed that oleogels with constant surface area-to-volume ratio could result in identical gelation times and consistent physical properties (MGC, melting temperature, melting enthalpy, yield stress, solid phase content, and oil binding capacity) during scale-up.

Formulation and Characterization of Emulgel-Based Jelly Candy: A Preliminary Study on Nutraceutical Delivery.

The development of consumer-friendly nutraceutical dosage forms is highly important for greater acceptance. In this work, such dosage forms were prepared based on structured emulsions (emulgels), where the olive oil phase was filled within the pectin-based jelly candy. The emulgel-based candies were designed as bi-modal carriers, where oil-soluble curcumin and water-soluble riboflavin were incorporated as the model nutraceuticals. Initially, emulsions were prepared by homogenizing varied concentrations (10% to 30% (w/w)) of olive oil in a 5% (w/w) pectin solution that contained sucrose and citric acid. Herein, pectin acted as a structuring agent-cum-stabilizer. Physico-chemical properties of the developed formulations were thoroughly analyzed. These studies revealed that olive oil interferes with the formation of polymer networks of pectin and the crystallization properties of sugar in candies. This was confirmed by performing FTIR spectroscopy and DSC studies. In vitro disintegration studies showed an insignificant difference in the disintegration behavior of candies, although olive oil concentration was varied. Riboflavin and curcumin were then incorporated into the jelly candy formulations to analyze whether the developed formulations could deliver both hydrophilic and hydrophobic nutraceutical agents. We found that the developed jelly candy formulations were capable of delivering both types of nutraceutical agents. The outcome of the present study may open new directions for designing and developing oral nutraceutical dosage forms.

Advances in Nanoarchitectonics of Antimicrobial Tiles and a Quest for Anti-SARS-CoV-2 Tiles.

Design of antimicrobial tiles seems necessary to combat against contagious diseases, especially COVID-19. In addition to personal hygiene, this technology facilitates public hygiene as antimicrobial tiles can be installed at hospitals, schools, banks, offices, lobbies, railway stations, etc. This review is primarily focused on preparing antimicrobial tiles using an antimicrobial layer or coatings that fight against germs. The salient features and working mechanisms of antimicrobial tiles are highlighted. This challenge is a component of the exploratory nature of nanoarchitectonics, that also extends farther than the realm of nanotechnology. This nanoarchitectonics has been successful at the laboratory scale as antimicrobial metal nanoparticles are mainly used as additives in preparing tiles. A detailed description of various materials for developing unique antimicrobial tiles is reported here. Pure metal (Ag, Zn) nanoparticles and a mixture of nanoparticles with other inorganic materials (SiO2,, TiO2, anatase, nepheline) have been predominantly used to combat microbes. The developed antimicrobial tiles have shown excellent activity against a wide range of Gram-positive and Gram-negative bacteria. The last section discussed a hypothetical overview of utilizing the antimicrobial tiles against SARS-CoV-2. Overall, this review gives descriptive knowledge about the importance of antimicrobial tiles to create a clean and sustainable environment.

Freestanding organogels by molecular velcro of unsaturated amphiphiles.

A simple amphiphile, N-cardanyltaurine amide (NCT) with different degrees of cis-unsaturation in its tail resulted in the formation of strong organogels. Interestingly, this is in contrast to the commonly accepted notion that introducing unsaturation in alkyl chains enhances fluidity in lipid assemblies. The physico-chemical and first-principles DFT calculations confirmed the pegging of 'kinked' unsaturated side chains, where the hydrophobic interlocking as in Velcro fasteners leads to a network of cylindrical micelles, resulting in self-standing organogels. Textural profile analysis and spectroscopic details substantiated the dynamic assembly to resemble a 3D network of gelators rather than being a cross-linked or polymerized matrix of monomers.

Genipin-Crosslinked Gelatin-Based Emulgels: an Insight into the Thermal, Mechanical, and Electrical Studies.

The present study discusses about the preparation and characterization (thermal, mechanical, and electrical) of the genipin-crosslinked gelatin emulgels. Emulgels have gained importance in recent years due to their improved stability than emulsions and ability to control the drug release. Mustard oil was used as the representative oil. A decrease in the enthalpy and entropy of the formulations was observed with the increase in the oil fraction. The mechanical studies suggested formation of softer emulgels as the oil fraction was increased. As the proportion of the oil fraction was increased in the emulgels, there was a corresponding increase in the impedance. The drug release properties from the emulgels were also studied. Ciprofloxacin was used as the model antimicrobial drug. The drug release was higher from the emulgels whose electrical conductivity was higher.

Mango butter emulsion gels as cocoa butter equivalents: physical, thermal, and mechanical analyses.

The search for cocoa butter equivalents in food and pharmaceutical industries has been gaining importance. In the present study, mango butter was explored as cocoa butter equivalent. Aqueous gelatin solution (20% w/w) containing cocoa butter and mango butter water-in-oil (fat) type emulsion gels were prepared by hot emulsification method. XRD and DSC melting profiles suggested the presence of unstable polymorphic forms (α and ß') of fats in the emulsion gels. The crystal size and solid fat content analyses suggested that the presence of aqueous phase might have hindered the transformation of unstable polymorphic forms to stable polymorphic form (ß) in the emulsion gels. Fat crystals in the emulsion gels were formed by instantaneous nucleation via either uni- or bidimensional growth (Avrami analysis). The viscoelastic nature of the emulsion gels was evaluated by modified Peleg's analysis (stress relaxation study). Results inferred that the physical, thermal, and mechanical properties of mango butter emulsion gels are comparable to those of cocoa butter emulsion gels. On the basis of preliminary studies, it was suggested that the mango butter emulsion gels may have potential to be used as cocoa butter equivalents.

Encapsulation of sorbitan ester-based organogels in alginate microparticles.

Leaching of the internal apolar phase from the biopolymeric microparticles during storage is a great concern as it undoes the beneficial effects of encapsulation. In this paper, a novel formulation was prepared by encapsulating the sunflower oil-based organogels in alginate microparticles. Salicylic acid and metronidazole were used as the model drugs. The microparticles were prepared by double emulsion methodology. Physico-chemical characterization of the microparticles was done by microscopy, FTIR, XRD, and DSC studies. Oil leaching studies, biocompatibility, mucoadhesivity, in vitro drug release, and the antimicrobial efficiency of the microparticles were also performed. The microparticles were found to be spherical in shape. Gelation of the sunflower oil prevented leaching of the internal phase from the microparticles. Release of drugs from the microparticles followed Fickian kinetics and non-Fickian kinetics in gastric and intestinal environments, respectively. Microparticles showed good antimicrobial activity against both Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria. The results suggested that the developed formulations hold promise to carry oils without leakage of the internal phase. Encapsulation of organogels within the microparticles has improved the drug entrapment efficiency and improved characteristics for controlled delivery applications.

Development of span 80-tween 80 based fluid-filled organogels as a matrix for drug delivery.

BACKGROUND: Organogels are defined as 3-dimensional networked structures which immobilize apolar solvents within them. These gelled formulations are gaining importance because of their ease of preparation and inherent stability with improved shelf life as compared to the ointments. AIM: Development of span 80-tween 80 mixture based organogels for the first time by fluid-filled fiber mechanism. MATERIALS AND METHODS: Span 80 and tween 80 were used as surfactant and co-surfactant, respectively. The surfactant mixtures were dissolved in oil followed by the addition of water which led to the formation of organogels at specific compositions. The formulations were analyzed by microscopy, X-ray diffraction (XRD), time-dependent stability test and accelerated thermal stability test by thermocycling method. Ciprofloxacin, a fourth-generation fluoroquinolone, was incorporated within the organogels. The antimicrobial activity of the drug loaded organogels and in vitro drug release from the gels was also determined. RESULTS AND CONCLUSIONS: Microscopic results indicated that the gels contained clusters of water-filled spherical structures. XRD study indicated the amorphous nature of the organogels. The release of the drug was found to be diffusion controlled and showed marked antimicrobial property. In short, the prepared organogels were found to be stable enough to be used as pharmaceutical formulation.

Bacterial vaginosis: Etiology and modalities of treatment-A brief note.

A large women population of the world is suffering from a vaginal infection commonly known as bacterial vaginosis. The disease is associated with the decrease in the lactobacilli count in the vagina. Till date, there is a lack of full proof treatment modalities for the cure of the disease. The treatment includes the use of antimicrobials and/or acidifying agents and probiotics, either separately or in combination. This note discusses about the etiology and the various present-day modalities of treatment of bacterial vaginosis.