The effect of single-implant overdentures on cognitive function in older adults: A 3-year follow-up report.

OBJECTIVE: To investigate the occurrence of mild cognitive impairment in edentulous patients up to 3 years after they received single-implant overdentures (1-IODs). METHODS: This was a follow-up study for a crossover randomized controlled trial comparing 1-IODs and conventional complete dentures, with patient satisfaction as the primary outcome. In the present study, the cognitive function of the patients, measured with the Japanese version of the Montreal cognitive assessment (MoCA-J), was evaluated as the secondary outcome at baseline and 2 months, 1 year, 2 years, and 3 years after 1-IOD placement. The total and domain (memory, executive function, visuospatial skills, language, attention, and orientation) MoCA-J scores of the patients at each timepoint were analyzed and compared. RESULTS: Twenty-two patients with edentulous mandibles received 1-IODs. Within-group comparisons revealed that the total MoCA-J scores at 1 year and 3 years after 1-IOD placement were significantly increased compared with baseline scores. Additionally, the memory domain scores at all timepoint were significantly increased compared with the baseline scores, and the executive function domain scores at the 2-month, 2-year and 3-year timepoint were significantly increased compared with the baseline scores. CONCLUSION: Patients with edentulous mandibles who underwent 1-IOD placement showed significantly improved total scores of MoCA-J after 1 year and 3 years of wearing 1-IODs. In addition, they showed significantly improved memory domain scores at 2 months, 1 year, 2 years, and 3 years after 1-IOD placement and executive function domain scores at 2 months, 2 years, and 3 years after 1-IOD placement. CLINICAL SIGNIFICANCE: The results of this study suggest that 1-IOD treatment for older adults, especially those with edentulous mandibles, may prevent cognitive decline regardless of the condition of the maxilla.

Stress distribution of one-piece and two-piece mini-Implant overdentures with various attachment systems and diameters: A finite element analysis.

PURPOSE: We investigated and compared the stress distribution within one- and two-piece mini-implants for overdentures with three different attachments (ball, Locator, and magnet) and two different diameters using three-dimensional finite element (3D FE) analysis and a monotonic bending test. The goal was to identify the most beneficial implant attachment system design for mini-implant overdentures with a lower risk of implant fracture. METHODS: Twelve 3D FE models simulating a mandible segment with one- and two-piece mini-implants with different attachment systems, diameters, and overdentures were created using three-dimensional computer-aided design (CAD) software. Vertical and oblique forces (45° to the longitudinal axis of the implant) of 100 N were applied to the dentures. The stress distribution was analyzed. A bending test was performed on a mini-implant (Locator, 2.4 mm) using a testing machine to quantify the load at yield stress. RESULTS: One-piece mini-implants showed lower maximum stress compared to two-piece mini-implants. Among the three designs, the magnet attachment systems showed the maximum stress. The maximum von Mises stress occurred at the neck of the implants, which was surrounded by cortical bone in all models, and under both loading conditions. CONCLUSIONS: Focusing on the attachments and one- and two-piece designs of mini-implant overdentures using CAD models to reduce confounding factors affecting the stress distribution, we concluded that one-piece mini-implants tended to show lower stress compared to two-piece mini-implants. Mini-implant overdentures with Locator and ball attachments demonstrated lower stress within the implants compared to those with magnet attachments under vertical and oblique loading conditions.

Effect of post-rinsing time and method on accuracy of denture base manufactured with stereolithography

PURPOSE@#This in vitro study investigates the effect of different post-rinsing times and methods on the trueness and precision of denture base resin manufactured through stereolithography. @*MATERIALS AND METHODS@#Ninety clear photopolymer resin specimens were fabricated and divided into nine groups (n = 10) based on rinsing times and methods. All specimens were rinsed with 99% isopropanol alcohol for 5, 10, and 15 min using three methods-automated, ultrasonic cleaning, and hand washing. The specimens were polymerized for 30 min at 40℃. For trueness, the scanned intaglio surface of each SLA denture base was superimposed on the original standard tessellation language (STL) file using best-fit alignment (n = 10). For precision, the scanned intaglio surface of the STL file in each specimen group was superimposed across each specimen (n = 45). The root mean square error (RMSE) was measured, and the data were analyzed statistically through one-way ANOVA and Tukey test (α < .05). @*RESULTS@#The 10-min automated group exhibited the lowest RMSE. For trueness, this was significantly different from specimens in the 5-min hand-washed group (P < .05). For precision, this was significantly different from those of other groups (P < .05), except for the 15-min automated and 15-min ultrasonic groups. The color map results indicated that the 10-min automated method exhibited the most uniform distribution of the intaglio surface adaptation. @*CONCLUSION@#The optimal postprocessing rinsing times and methods for achieving clear photopolymer resin were found to be the automated method with rinsing times of 10 and 15 min, and the ultrasonic method with a rinsing time of 15 min.