Pyrene-Benzimidazole Derivatives as Novel Blue Emitters for OLEDs.

Three novel small organic heterocyclic compounds: 2-(1,2-diphenyl)-1H-benzimidazole-7-tert-butylpyrene (compound A), 1,3-di(1,2-diphenyl)-1H-benzimidazole-7-tert-butylpyrene (compound B), and 1,3,6,8-tetra(1,2-diphenyl)-1H-benzimidazolepyrene (compound C) were synthesized and characterized for possible applications as blue OLED emitters. The specific molecular design targeted decreasing intermolecular aggregation and disrupting crystallinity in the solid-state, in order to reduce dye aggregation, and thus obtain efficient pure blue photo- and electroluminescence. Accordingly, the new compounds displayed reasonably high spectral purity in both solution- and solid-states with average CIE coordinates of (0.160 ± 0.005, 0.029 ± 0.009) in solution and (0.152 ± 0.007, 0.126 ± 0.005) in solid-state. These compounds showed a systematic decrease in degree of crystallinity and intermolecular aggregation due to increasing steric hindrance, as revealed using powder X-ray diffraction analysis and spectroscopic studies. An organic light-emitting diode (OLED) prototype fabricated using compound B as the non-doped emissive layer displayed an external quantum efficiency (EQE) of 0.35 (±0.04)% and luminance 100 (±6) cd m-2 at 5.5 V with an essentially pure blue electroluminescence corresponding to CIE coordinates of (0.1482, 0.1300). The highest EQE observed from this OLED prototype was 4.3 (±0.3)% at 3.5 V, and the highest luminance of 290 (±10) cd m-2 at 7.5 V. These values were found comparable to characteristics of the best pure blue OLED devices based on simple fluorescent small-molecule organic chromophores.

Pyrenylpyridines: Sky-Blue Emitters for Organic Light-Emitting Diodes.

A novel sky-blue-emitting tripyrenylpyridine derivative, 2,4,6-tri(1-pyrenyl)pyridine (2,4,6-TPP), has been synthesized using a Suzuki coupling reaction and compared with three previously reported isomeric dipyrenylpyridine (DPP) analogues (2,4-di(1-pyrenyl)pyridine (2,4-DPP), 2,6-di(1-pyrenyl)pyridine (2,6-DPP), and 3,5-di(1-pyrenyl)pyridine (3,5-DPP)). As revealed by single-crystal X-ray analysis and computational simulations, all compounds possess highly twisted conformations in the solid state with interpyrene torsional angles of 42.3°-57.2°. These solid-state conformations and packing variations of pyrenylpyridines could be correlated to observed variations in physical characteristics such as photo/thermal stability and spectral properties, but showed only marginal influence on electrochemical properties. The novel derivative, 2,4,6-TPP, exhibited the lowest degree of crystallinity as revealed by powder X-ray diffraction analysis and formed amorphous thin films as verified using grazing-incidence wide-angle X-ray scattering. This compound also showed high thermal/photo stability relative to its disubstituted analogues (DPPs). Thus, a nondoped organic light-emitting diode (OLED) prototype was fabricated using 2,4,6-TPP as the emissive layer, which displayed a sky-blue electroluminescence with Commission Internationale de L'Eclairage (CIE) coordinates of (0.18, 0.34). This OLED prototype achieved a maximum external quantum efficiency of 6.0 ± 1.2% at 5 V. The relatively high efficiency for this simple-architecture device reflects a good balance of electron and hole transporting ability of 2,4,6-TPP along with efficient exciton formation in this material and indicates its promise as an emitting material for design of blue OLED devices.

Influence of Anion Variations on Morphological, Spectral, and Physical Properties of the Propidium Luminophore.

Propidium iodide (3,8-diamino-5-[3-(diethylmethylammonio)propyl]-6-phenylphenanthridinium diiodide, [P][I]), is a well-known red fluorescent dye that is widely used for biological applications such as staining. In this study, we have replaced the iodide counteranion of [P][I] with three hydrophobic and bulky organic anions, trifluoromethanesulfonate/[TfO], bis(trifluoromethanesulfonyl)imide/[NTf2], and bis(perfluoroethylsulfonyl)imide/[BETI], and have thus obtained a propidium-derived group of uniform materials based on organic salts (PGUMBOS). The morphological, spectral, and physical properties of these materials were investigated in order to understand the impact of anion variations. While [P][I] is a crystalline solid, propidium salts with [BETI] or [NTf2] counteranions, i.e., [P][BETI] and [P][NTf2], have significantly lower crystallinity as reflected in powder X-ray diffraction data. In addition, [P][BETI] and [P][NTf2] exhibited improved photothermal stability as compared to [P][I] when examined using thermogravimetric analysis and time-dependent kinetic fluorescence experiments under the given experimental conditions. Spectral and electronic properties of the propidium luminophore were not significantly changed upon anion variations, although fluorescence lifetimes and quantum yields showed a systematic increase with decreasing solvent polarity. The experimental HOMO-LUMO energy gaps of these compounds were ∼2 eV with energies of HOMO and LUMO orbitals obtained as -5.15 (±0.08) and -3.19 (±0.08) eV.

Endocytic Selective Toxicity of Rhodamine 6G nanoGUMBOS in Breast Cancer Cells.

Herein, we report on the role of endocytosis in the selective chemotherpeutic toxicity of rhodamine 6G (R6G) based nanomaterials, i.e., nanoGUMBOS, that are derived from a group of uniform materials based on organic salts (GUMBOS). Evaluation of cellular uptake in the presence and absence of endocytosis inhibitors suggests nanoGUMBOS internalization via clathrin-mediated endocytosis in cancer cells and reveals lack of endocytic internalization in normal cells. Results from characterization of these nanomaterials suggest that endocytic internalization in cancer cells leads to nanoGUMBOS dissociation within the endosomal environment. This ultimately results in selective cytotoxicity of the nanoGUMBOS for cancer cells with no toxicity toward normal cells under examined conditions. Following examination of the selectivity mechanism, in vivo investigations were performed to examine potential therapeutic properties of these nanoparticles. Remarkably, nanoGUMBOS treatment using a mouse xenograft model reduced the tumor volume by 50% suggesting retention of in vitro therapeutic properties in vivo. These results corroborate the selective behavior of nanoGUMBOS and demonstrate their in vivo therapeutic effects, providing further insight into the possible use of these nanomaterials as potential chemotherapeutic agents.

Low-Temperature Synthesis of a TiO2/Si Heterojunction.

The classical SiO2/Si interface, which is the basis of integrated circuit technology, is prepared by thermal oxidation followed by high temperature (>800 °C) annealing. Here we show that an interface synthesized between titanium dioxide (TiO2) and hydrogen-terminated silicon (H:Si) is a highly efficient solar cell heterojunction that can be prepared under typical laboratory conditions from a simple organometallic precursor. A thin film of TiO2 is grown on the surface of H:Si through a sequence of vapor deposition of titanium tetra(tert-butoxide) (1) and heating to 100 °C. The TiO2 film serves as a hole-blocking layer in a TiO2/Si heterojunction solar cell. Further heating to 250 °C and then treating with a dilute solution of 1 yields a hole surface recombination velocity of 16 cm/s, which is comparable to the best values reported for the classical SiO2/Si interface. The outstanding performance of this heterojunction is attributed to Si-O-Ti bonding at the TiO2/Si interface, which was probed by angle-resolved X-ray photoelectron spectroscopy. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) showed that Si-H bonds remain even after annealing at 250 °C. The ease and scalability of the synthetic route employed and the quality of the interface it provides suggest that this surface chemistry has the potential to enable fundamentally new, efficient silicon solar cell devices.

Rhombohedral polytypes of the layered honeycomb delafossites with optical brilliance in the visible.

We report the synthesis of the Delafossite honeycomb compounds Cu3Ni2SbO6 and Cu3Co2SbO6 via a copper topotactic reaction from the layered α-NaFeO2-like precursors Na3Ni2SbO6 and Na3Co2SbO6. The low-temperature exchange reaction exclusively produces the rhombahedral 3R polytype subcell, whereas only the hexagonal 2H polytype subcell has been made by conventional synthesis. The thus-synthesized 3R variants are visually striking; they are bright lime-green (Ni variant) and terracotta-orange (Co variant), while both of the conventionally synthesized 2H variants have a burnt-red color. The new structures are characterized by powder X-ray diffraction and Rietveld analysis as well as magnetic susceptibility, X-ray photoelectron spectroscopy (XPS), and diffuse-reflectance optical spectroscopy. Using thermogravimetric analysis, we identify a second order 3R → 2H phase transition as well as a first-order structural transition associated with rearrangement of the honeycomb stacking layers. The optical absorbance spectra of the samples show discrete edges that correlate well to their visual colors. Exposing Cu3Ni2SbO6 to O2 and heat causes the sample to change color. XPS confirms the presence of Cu(2+) in these samples, which implies that the difference in color between the polytypes is due to oxygen intercalation resulting from their different synthetic routes.