Discovery of novel 1,2,4-triazole tethered ß-hydroxy sulfides as bacterial tyrosinase inhibitors: synthesis and biophysical evaluation through in vitro and in silico approaches.

In this study, a series of 1,2,4-triazole-tethered ß-hydroxy sulfide scaffolds 11a-h was synthesized in good to remarkable yields (69-90%) through the thiolysis of oxiranes by the thiols in aqueous basic catalytic conditions. The synthesized 1,2,4-triazole-tethered ß-hydroxy sulfides were screened against bacterial tyrosinase enzyme, and Gram-positive and Gram-negative bacterial cultures i.e., (S. aureus) Staphylococcus aureus & (E. coli) Escherichia coli. Among the synthesized derivatives, the molecules 11a (IC50 = 7.67 ± 1.00 µM), 11c (IC50 = 4.52 ± 0.09 µM), 11d (IC50 = 6.60 ± 1.25 µM), and 11f (IC50 = 5.93 ± 0.50 µM) displayed the better tyrosinase inhibitory activity in comparison to reference drugs ascorbic acid (IC50 = 11.5 ± 1.00 µM) and kojic acid (IC50 = 30.34 ± 0.75 µM). The molecule benzofuran-triazol-propan-2-ol 11c proved to be the most potent bacterial tyrosinase inhibitory agent with a minimum IC50 of 4.52 ± 0.09 µM, as compared to other synthesized counterparts and both standards (kojic acid and ascorbic acid). The compound diphenyl-triazol-propan-2-ol 11a and benzofuran-triazole-propan-2-ol 11c showed comparable anti-bacterial chemotherapeutic efficacy with minimum inhibitory concentrations (MIC = 2.0 ± 2.25 mg mL-1 and 2.5 ± 0.00 mg mL-1, respectively) against S. aureus bacterial strain in comparison with standard antibiotic penicillin (MIC = 2.2 ± 1.15 mg mL-1). Furthermore, among the synthesized derivatives, only compound 11c demonstrated better anti-bacterial activity (MIC = 10 ± 0.40 mg mL-1) against E. coli, which was slightly less than the standard antibiotic i.e., penicillin (MIC = 2.4 ± 1.00 mg mL-1). The compound 11c demonstrated a better binding score (-7.08 kcal mol-1) than ascorbic acid (-5.59 kcal mol-1) and kojic acid (-5.78 kcal mol-1). Molecular docking studies also validate the in vitro anti-tyrosinase assay results; therefore, the molecule 11c can be the lead bacterial tyrosinase inhibitor as well as the antibacterial agent against both types of bacterial strains after suitable structural modifications.

Development of novel transition metal-catalyzed synthetic approaches for the synthesis of a dihydrobenzofuran nucleus: a review.

The synthesis of dihydrobenzofuran scaffolds bears pivotal significance in the field of medicinal chemistry and organic synthesis. These heterocyclic scaffolds hold immense prospects owing to their significant pharmaceutical applications as they are extensively employed as essential precursors for constructing complex organic frameworks. Their versatility and importance make them an interesting subject of study for researchers in the scientific community. While exploring their synthesis, researchers have unveiled various novel and efficient pathways for assembling the dihydrobenzofuran core. In the wake of extensive data being continuously reported each year, we have outlined the recent updates (post 2020) on novel methodological accomplishments employing the efficient catalytic role of several transition metals to forge dihydrobenzofuran functionalities.

A Comprehensive Review on Benzofuran Synthesis Featuring Innovative and Catalytic Strategies.

Benzofurans have intrigued both pharmaceutical researchers and chemists owing to the medicinal usage of their derivatives against copious disease-causing agents (i.e., bacteria, viruses, and tumors). These heterocyclic scaffolds are pervasively encountered in a number of natural products and drugs. The ever-increasing utilization of benzofuran derivatives as pharmaceutical agents persuaded the chemists to devise novel and facile methodological approaches to assemble the biologically potent benzofuran nucleus. This review summarizes the current developments regarding the innovative synthetic routes and catalytic strategies to procure the synthesis of benzofuran heterocycles with their corresponding mechanistic details, reported by several research groups during 2021-2023.

Exploring the synthetic potential of epoxide ring opening reactions toward the synthesis of alkaloids and terpenoids: a review.

Epoxides are oxygen containing heterocycles which are significantly employed as crucial intermediates in various organic transformations. They are considered highly reactive three-membered heterocycles due to ring strain and they undergo epoxide ring opening reactions with diverse range of nucleophiles. Epoxide ring-opening reactions have gained prominence as flexible and effective means to obtain various functionalized molecules. These reactions have garnered substantial attention in organic synthesis, driven by the need to comprehend the synthesis of biologically and structurally important organic compounds. They have also found applications in the synthesis of complex natural products. In this review article, we have summarized the implementation of epoxide ring opening reactions in the synthesis of alkaloids and terpenoids based natural products reported within the last decade (2014-2023).

Halloysite nanotubes-enhanced epoxy acrylate latex emulsion as a novel anticorrosive protective coating for metal surface in 3.5% NaCl solution.

Corrosion is a major problem that can lead to the degradation of metal structures. In this study, we developed a novel corrosion-protective coating for metal substrates based on a modified epoxy acrylate formulation reinforced with halloysite nanotubes (HNTs). Epoxy acrylate oligomers were first synthesized through the acrylation of epoxy using acrylic acid, followed by copolymerization with butyl methacrylate/vinyl acetate monomers to produce grafted epoxy acrylates (GEA). HNTs were then incorporated into the polymeric dispersion at weight loadings of 1%, 1.5%, and 2%. The corrosion resistance and waterproofing properties of the coatings were evaluated. The results showed that steel samples coated with HNTs-modified GEA showed no signs of rusting even after 16 days of immersion in a corrosive solution, whereas those coated with GEA alone showed rusting after only 9 days. These results demonstrate the effectiveness of HNTs-modified GEA coatings in protecting steel surfaces against corrosion. The coatings are also water-resistant and can be easily applied. This work provides a new approach to developing corrosion-protective coatings for metal substrates.

QSPR Analysis of Drugs for Treatment of Schizophrenia Using Topological Indices.

Schizophrenia is a chronic psychotic disorder characterized primarily by cognitive deficits. Drugs and therapies are helpful in managing the symptoms, mostly with long-term compliance. There is a pressing need to design more efficient drugs with fewer adverse effects. Solubility, metabolic stability, toxicity, permeability, and transporter effects are important parameters in the efficacy of drug design, which in turn depend upon different physical and chemical characteristics of drugs. In recent years, there has been growing interest in developing computational tools for the discovery and development of drugs for schizophrenia. Some of these methods use machine learning algorithms to predict the efficacy and side effects of the potential drugs. Other studies have used computer simulations to understand the molecular mechanisms underlying the disease and identify new targets for drug development. Topological indices are numeric quantities linked to the chemical structure of drugs and predict the properties, reactivity, and stability of drugs through the quantitative structure-property relationship (QSPR). This work is aimed at using statistical techniques to link QSPR correlating properties with connectivity indices using linear regression. The QSPR model gives quite a better estimation of the properties of drugs, such as melting point, boiling point, enthalpy, flash point, molar refractivity, refractive index, complexity, molecular weight, and refractivity. Results are validated by comparing actual values to estimated values for the drugs.

An Exploration of the Inhibitory Mechanism of Rationally Screened Benzofuran-1,3,4-Oxadiazoles and-1,2,4-Triazoles as Inhibitors of NS5B RdRp Hepatitis C Virus through Pharmacoinformatic Approaches.

Benzofuran, 1,3,4-oxadiazole, and 1,2,4-triazole are privileged heterocyclic moieties that display the most promising and wide spectrum of biological activities against a wide variety of diseases. In the current study, benzofuran-1,3,4-oxadiazole BF1-BF7 and benzofuran-1,2,4-triazole compounds BF8-BF15 were tested against HCV NS5B RNA-dependent RNA polymerase (RdRp) utilizing structure-based screening via a computer-aided drug design (CADD) approach. A molecular docking approach was applied to evaluate the binding potential of benzofuran-appended 1,3,4-oxadiazole and 1,2,4-triazole BF1-BF15 molecules. Benzofuran-1,3,4-oxadiazole scaffolds BF1-BF7 showed lesser binding affinities (-12.63 to -14.04 Kcal/mol) than benzofuran-1,2,4-triazole scaffolds BF8-BF15 (-14.11 to -16.09 Kcal/mol) against the HCV NS5B enzyme. Molecular docking studies revealed the excellent binding affinity scores exhibited by benzofuran-1,2,4-triazole structural motifs BF-9 (-16.09 Kcal/mol), BF-12 (-15.75 Kcal/mol), and BF-13 (-15.82 Kcal/mol), respectively, which were comparatively better than benzofuran-based HCV NS5B inhibitors' standard reference drug Nesbuvir (-15.42 Kcal/mol). A molecular dynamics simulation assay was also conducted to obtain valuable insights about the enzyme-compounds interaction profile and structural stability, which indicated the strong intermolecular energies of the BF-9+NS5B complex and the BF-12+NS5B complex as per the MM-PBSA method, while the BF-12+NS5B complex was the most stable system as per the MM-GBSA calculation. The drug-likeness and ADMET studies of all the benzofuran-1,2,4-triazole derivatives BF8-BF15 revealed that these compounds possessed good medicinal chemistry profiles in agreement with all the evaluated parameters for being drugs. The molecular docking affinity scores, MM-PBSA/MM-GBSA and MD-simulation stability analysis, drug-likeness profiling, and ADMET study assessment indicated that N-4-fluorophenyl-S-linked benzofuran-1,2,4-triazole BF-12 could be a future promising anti-HCV NS5B RdRp inhibitor therapeutic drug candidate that has a structural agreement with the Nesbuvir standard reference drug.

Environmental friendly pollution free bio-dyeing of wool with haar singhar (Coral Jasmine) flower extract.

The world's move towards revival of eco-labelled products has created a huge urge to explore new means which are healthier for the global community. Among such means, plant-based bio-pigments for coloration of matrix are gaining worldwide fame, particularly in the textile sector. For the purpose of appraising new source of eco-friendly dyes, using microwave irradiation techniques, Coral Jasmine flowers have been explored for the bio-dyeing of wool. The colorant was extracted in acidic medium owing to nature of fabric, and both stuffs have been exposed to microwave treatment up to 5 min. Bio-coloration of MW irradiated and unirradiated wool was done using MW irradiated and unirradiated extract for observing high yield. Central composite design (CCD) as statistical method was utilized to see the significance of dyeing parameters chosen for mordanting to develop colorfast shades. Different concentrations of sustainable chemicals and bio-mordants as per weight of fabric were employed to introduce new shades with improved colorfastness properties. International standard textile methods determining shade permanency (fastness) have been employed onto selected dyed-mordanted fabrics. Good yield of colorant was observed when MW irradiated wool fabric was dyed at 75 °C for 45 min with extract of 7 pH, having 1.5g/100 mL of salt solution; the promising color yield was observed. As per gray scale ratings observed after ISO standard methods, pine nut as bio-mordant and iron salt as chemical mordant have developed colorfast shades. Conclusively, it can be recommended that methods for the isolation of colorants from new dye yielding plants, MW heating method as suitable clean technology and medicinal-based bio-mordants should be employed for getting permanent gamutes.

Carboxymethyl Cellulose/Gelatin Hydrogel Films Loaded with Zinc Oxide Nanoparticles for Sustainable Food Packaging Applications.

The current research work presented the synthesis of carboxymethyl cellulose-gelatin (CMC/GEL) blend and CMC/GEL/ZnO-Nps hydrogel films which were characterized by FT-IR and XRD, and applied to antibacterial and antioxidant activities for food preservation as well as for biomedical applications. ZnO-Nps were incorporated into the carboxymethyl cellulose (CMC) and gelatin (GEL) film-forming solution by solution casting followed by sonication. Homogenous mixing of ZnO-Nps with CMC/GEL blend improved thermal stability, mechanical properties, and moisture content of the neat CMC/GEL films. Further, a significant improvement was observed in the antibacterial activity and antioxidant properties of CMC/GEL/ZnO films against two food pathogens, Staphylococcus aureus and Escherichia coli. Overall, CMC/GEL/ZnO films are eco-friendly and can be applied in sustainable food packaging materials.

Theoretical and Experimental Insights of Benzimidazole Catalyzed by the Epoxy-Acrylic Acid Reaction.

This study focuses on the experimental and molecular-level investigation of epoxy acrylate formation. Epoxy acrylate vinyl ester resin was prepared by a reaction of diglycidyl ether of bisphenol-A-based epoxy resin and acrylic acid, using benzimidazole as a catalyst. It was confirmed that benzimidazole can effectively catalyze this reaction. FTIR analysis of the product revealed a simple addition esterification reaction between the epoxide group and carboxylic group of acrylic acid excluding the side reactions (e.g., etherification). DFT computational studies were performed to theoretically explore the insights of reaction mechanisms. The calculations revealed that the benzimidazole-catalyzed reaction dominates the uncatalyzed reaction. A comparison of calculated activation energies showed that concerted mechanisms are less significant in such reactions owing to their high activation barriers.

Computing Topological Invariants of Deep Neural Networks.

A deep neural network has multiple layers to learn more complex patterns and is built to simulate the activity of the human brain. Currently, it provides the best solutions to many problems in image recognition, speech recognition, and natural language processing. The present study deals with the topological properties of deep neural networks. The topological index is a numeric quantity associated to the connectivity of the network and is correlated to the efficiency and accuracy of the output of the network. Different degree-related topological indices such as Zagreb index, Randic index, atom-bond connectivity index, geometric-arithmetic index, forgotten index, multiple Zagreb indices, and hyper-Zagreb index of deep neural network with a finite number of hidden layers are computed in this study.

Omega, Sadhana, and PI Polynomials of Quasi-Hexagonal Benzenoid Chain.

Counting polynomials are important graph invariants whose coefficients and exponents are related to different properties of chemical graphs. Three closely related polynomials, i.e., Omega, Sadhana, and PI polynomials, dependent upon the equidistant edges and nonequidistant edges of graphs, are studied for quasi-hexagonal benzenoid chains. Analytical closed expressions for these polynomials are derived. Moreover, relation between Padmakar-Ivan (PI) index of quasi-hexagonal chain and that of corresponding linear chain is also established.

Designing of non-fullerene 3D star-shaped acceptors for organic solar cells.

The design and fabrication of solar cells have recently witnessed the exploration of non-fullerene-based acceptor molecules for higher efficiency. In this study, the optical and electronic properties of four new three-dimensional (3D) star-shaped acceptor molecules (M1, M2, M3, and M4) are evaluated for use as acceptor molecules in organic solar cells. These molecules contain a triphenylamine donor core with diketopyrrolopyrrole acceptor arms linked via a thiophene bridge unit. Molecules M1-M4 are characterized by different end-capped acceptor moieties, including 2-(5-methylene-6-oxo-5,6-dihydrocyclopenta-b-thiophen-4-ylidene)malononitrile (M1), 2-(2-methylene-3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (M2), 2-(5-methyl-2-methylene-3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (M3), and 3-methyl-5-methylnene-thioxothiazolidin-4-one (M4). The properties of the newly designed molecules were compared with a well-known reference compound R, which was recently reported as an excellent acceptor molecule for organic solar cells. Molecules M1-M4 exhibit suitable frontier molecular orbital patterns for charge mobility. M2 shows maximum absorption (λmax) at 846.8 nm in dichloromethane solvent, which is ideal for the design of transparent solar cells. A strong electron withdrawing end-capped acceptor causes a red shift in absorption spectra. All molecules are excellent for hole mobility due to a lower value of λh compared to the reference R. Graphical abstract Here, we have designed four new triphenylamine-based three-dimensional star-shaped electron acceptors with different electron withdrawing end-capped acceptor moieties, namely M1, M2, M3, and M4) for opto-electronic properties of organic solar cells. The designed star-shaped acceptor molecules show excellent optoelectronic properties with respect to reference compound R.

Computational investigations into the structural and electronic properties of Cd n Te n (n = 1-17) quantum dots.

Size-tunability of the electronic and optical properties of semiconductor quantum dots and nanoclusters is due to the quantum size effect, which causes variations in the electronic excitations as the particle boundaries are changed. Recently, CdSe and CdTe quantum dots have been used in energy harvesting devices. Despite these promising practical applications, a complete understanding of the electronic transitions associated with the surfaces of the nanoparticles is currently lacking and is difficult to achieve experimentally. Computational methods could provide valuable insights and allow us to understand the electronic and optical properties of quantum dots and nanoclusters. Hollow cage and endohedral or core-shell cage structures for Cd n Te n clusters have been reported before. We have performed systematic density functional theory (DFT) studies on the structure and electronic properties of the Cd n Te n (n = 1-17) clusters. As the number of atoms increases in the Cd n Te n clusters, the predicted geometries change from simple planar structures to more complicated 3D-structures. Two classes of the most stable structures were elucidated for clusters with n = 10-17: (i) hollow cage structures with an empty center; and (ii) endohedral or core-shell cage structures with one or more atoms inside the cage. Noticeably higher highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps were observed for the hollow cage isomers as compared to the core-shell structures. The highest occupied molecular orbitals of all of the clusters studied were shown to be localized on the surface of the cage for the hollow cage structures, while in the case of the core-shell structures, the HOMO electron densities were found to be distributed both on surface and the interior of the structures. Most of the small size clusters Cd n Te n (n = 2-9) showed minimal values for the dipole moments (close to zero) owing to the highly ordered and symmetric configurations of these structures. For isomers of the larger clusters (n = 10-17), it was observed that the core-shell structures have higher values for the dipole moments than the hollow cage species because of the highly symmetric structures of the hollow cages. Core-shell cage structures exhibited lower polarizability than the respective hollow cage structures.

Removal of Heavy Metals by Adsorption onto Activated Carbon Derived from Pine Cones of Pinus roxburghii.

Activated carbon derived from cones of Pinus roxburghii (Himalayan Pine) was used as an adsorbent for the removal of copper, nickel and chromium ions from waste water. Surface analysis was carried out to determine the specific surface area and pore size distribution of the pine cone derived activated carbon. Optimal parameters, effect of adsorbent quantity, pH, equilibrium time, agitation speed and temperature were studied. Equilibrium data were evaluated by Langmuir and Freundlich isotherm models. Langmuir isotherm afforded the best fit to the equilibrium data with a maximum adsorption capacity of 14.2, 31.4 and 29.6 mg/g for Cu(II), Ni(II) and Cr(VI) respectively. Maximum adsorption of Cu(II), Ni(II) was observed in the pH range 4.0 to 4.5, whereas the best adsorption of Cr(VI) was observed at pH 2.5. It was found that 180 minutes was sufficient to gain adsorption equilibrium. The adsorption process follows a pseudo-second-order kinetic model.

Removal of Ni(II) from aqueous solution by using micellar enhanced ultrafiltration.

To explore the potential of micellar enhanced ultrafiltration (MEUF) process for the treatment of industrial effluent, herein, we report the surfactant-based separation of a metal ion [Ni(II)] from the aqueous solution using two different anionic surfactants viz. dioctyl sodium sulfosuccinate (DSS) and sodium dodecyl sulfate (SDS). By following a systematic investigation, we utilized two membranes with different pore sizes viz. 10,000 MWCO (molecular weight cutoff) and 30,000 MWCO and determined the rejection coefficient and permeate flux of the Ni(II) from aqueous at 1.5 bar trans-membrane pressure. The experimental results showed higher percentage of Ni(II) retention upon using the micellar solution of SDS compared with the solution containing DSS surfactant. In addition, the retention of Ni(II) ions incorporated in the micelles of surfactants was also found to be higher upon using 10,000 MWCO membrane compared with 30,000 MWCO membrane. Hence, we suggest that the combination of SDS surfactant and 10,000 MWCO membrane is a potent solution for the removal of metal ions from aqueous solutions via MEUF process.

Chitin based polyurethanes using hydroxyl terminated polybutadiene, part III: surface characteristics.

Hydroxy terminated polybutadiene (HTPB)-chitin based polyurethanes (PUs) with controlled hydrophobicity were synthesized using HTPB and toluene diisocyanate (TDI). The prepolymer was extended with different mass ratios of chitin and 1,4-butane diol (BDO). The effect of chitin contents in chain extender (CE) proportions on surface properties was studied and investigated. Incorporation of chitin contents into the final PU showed decrease in contact angle value of water drop, water absorption (%) and swelling behavior. The antibacterial activity of the prepared samples was affected by varying the chitin contents in the chemical composition of the final PU. The results demonstrated that the use of prepared material can be suggested as non-absorbable suture.

Modification of cellulosic fibers by UV-irradiation. Part II: after treatments effects.

This work presents the comparative study on the dyeing behavior of cellulose fibers in alkaline solutions and under the influence of UV radiation. The cellulosic fabrics were pretreated followed by conventional mercerization technique or treatment with UV irradiation. For different time duration the reorganization of cellulose fibers by swelling treatments in alkaline solutions results in numerous structural modifications, causing changes of their accessibility and/or reactivity. The results revealed that the swelling of the cellulosic fibers depends on type of pre-treatment, dose of the radiation and the concentration of alkaline solution used. SEM analysis confirmed that UV irradiation of the cellulosic fibers leads to a higher swelling in comparison with any concentration of NaOH treatment. In comparison of both the treatments, the mercerized cellulosic fibers have shown better tear and tensile strength as compared to the untreated and UV irradiated one. There is adverse effect of UV radiation on the mechanical properties of UV radiation. Moreover, no loss in weight was observed after exposing the cellulose fabrics surface to UV radiation.

Antimicrobial Activities of Novel Bis-Piperidinium Compounds.

The antimicrobial activity of two new series of bis-piperidinium compounds with alkyl chains of different lengths against bacterial (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Bacillus subtilis) and fungal strains (Aspergillus flavus, Aspergillus niger, Rhodolorula rubera, Lipomyces lopofera and Candida albicans), are described. Antimicrobial activities of the synthesized compounds were compared to that of dodecyltrimethylammonium chloride. Bis-piperidinium salts possessing 12-16 carbon side chains showed better antimicrobial properties as compared to the standard dodecyltrimethylammonium chloride.

A novel application of quaternary ammonium compounds as antibacterial hybrid coating on glass surfaces.

A hybrid coating is prepared on a glass surface by a sol-gel process using tetraethoxysilane (TEOS) and Q(4)N(+)-Si(OR)(3). Transparent coatings with smooth surfaces were investigated against both Gram-positive (Escherichia coli) and Gram-negative bacteria (Staphylococcus aureus). A rapid decrease of the count for both strains was observed within 72 h. A significant correlation has been observed between the concentration of Q(4)N(+)-Si(OR)(S) and the antibacterial activity which has been thoroughly investigated.