Wine corks decontamination using plasma activated water.

Cork taint provides off-odors and changes negatively wine composition. In fact, it is one of the most important causes of discarding bottled wine. 2,4,6-Trichloroanisole (TCA) is the most known molecule responsible of that problem. In this study, cork stoppers were artificially contaminated with a multi-pattern solution which contained different chloroanisoles and chlorophenols. Contaminated corks were immersed for 3 h in four Plasma Activated Water (PAW) generated during 1.5 min, 5 min, 15 min and 30 min. The products of OH•, NO• and NO2• with phenol were determined by HPLC for each PAW. After treating contaminated corks with PAW generated during 5 min, more than 72 % of TCA was removed and it was suggested OH• as the main reactive species decomposing TCA. Finally, other chloroanisole and chlorophenol molecules were examined after PAW treatments showing successful reductions in almost every molecule. Thus, it was presented PAW treatment as an easy solution for solving cork taint problems in wine industry.

Advances in the Application of Cold Plasma Technology in Foods.

In the last two decades, non-thermal processing technologies have gained widespread attention from the food industry, which is interested in mild and effective processes [...].

Mask disinfection using atmospheric pressure cold plasma.

OBJECTIVES: Mask usage has increased over the last few years due to the COVID-19 pandemic, resulting in a mask shortage. Furthermore, their prolonged use causes skin problems related to bacterial overgrowth. To overcome these problems, atmospheric pressure cold plasma was studied as an alternative technology for mask disinfection. METHODS: Different microorganisms (Pseudomonas aeruginosa, Escherichia coli, Staphylococcus spp.), different gases (nitrogen, argon, and air), plasma power (90-300 W), and treatment times (45 seconds to 5 minutes) were tested. RESULTS: The best atmospheric pressure cold plasma treatment was the one generated by nitrogen gas at 300 W and 1.5 minutes. Testing of breathing and filtering performance and microscopic and visual analysis after one and five plasma treatment cycles, highlighted that these treatments did not affect the morphology or functional capacity of the masks. CONCLUSION: Considering the above, we strongly believe that atmospheric pressure cold plasma could be an inexpensive, eco-friendly, and sustainable mask disinfection technology enabling their reusability and solving mask shortage.

Development and characterization of anti-biofilm coatings applied by Non-Equilibrium Atmospheric Plasma on stainless steel.

Biofilm-mediated microbial persistence of pathogenic and spoilage bacteria is a serious problem in food industries. Due to the difficulty of removing mature biofilms, great efforts are being made to find new strategies to prevent bacterial adherence to surfaces, the first step for biofilm development. In this study, coatings of (3-aminopropyl)triethoxysilane (APTES), tetraethyl orthosilicate (TEOS) and acrylic acid (AA) were applied by Non-Equilibrium Atmospheric Plasma on stainless steel (SS) AISI 316, the SS most commonly used in food industry equipment. Their anti-biofilm activity was assessed against Listeria monocytogenes CECT911 and Escherichia coli CECT515 after incubation at 37 °C. The best results were obtained for L. monocytogenes, with coatings consisting of a base coating of APTES and a functional coating of TEOS (AP10 + TE6) or AA (AP10 + AA6) that reduced biofilm production by 45% and 74%, respectively, when compared with the uncoated SS. These coatings were further characterized, together with a variation of the best one that replaced the acrylic acid with succinic acid (AP10 + SA6). Their anti-biofilm activity was assessed under different incubation conditions, including two strains of L. monocytogenes isolated from processing environments of a meat industry. The coating AP10 + AA6 reduced the biofilm formation by 90% after incubation at 12 °C, a temperature more representative of those commonly found in food processing environments. The morphological and physico-chemical characterization of the selected coatings showed that the coating with the highest anti-biofilm activity (i.e., AP10 + AA6) had lower surface roughness and higher hydrophilicity. This suggests that the formation of a hydration layer prevents the adherence of L. monocytogenes, an effect that seems to be enhanced by low temperature conditions, when the wettability of the strains is increased.

Durability Assessment of a Plasma-Polymerized Coating with Anti-Biofilm Activity against L. monocytogenes Subjected to Repeated Sanitization.

Biofilm formation on food-contact surfaces is a matter of major concern causing food safety and spoilage issues to this sector. The aim of this study was to assess the durability of the anti-biofilm capacity of a plasma-polymerized coating composed of a base coating of (3-aminopropyl)triethoxysilane (APTES) and a functional coating of acrylic acid (AcAc). Coated and uncoated AISI 316 stainless steel (SS) plates were subjected to five sanitization cycles with sodium hypochlorite (0.05%) and peracetic acid (0.5%). The effectiveness of the coating for the inhibition of multi-strain Listeria monocytogenes biofilm formation was confirmed using a three-strain cocktail, which was grown on the SS plates at 12 °C for 6 days. Compared to the uncoated SS, relative biofilm productions of 14.6% on the non-sanitized coating, 27.9% on the coating after sanitization with sodium hypochlorite, and 82.3% on the coating after sanitization with peracetic acid were obtained. Morphological and physicochemical characterization of the coatings suggested that the greater anti-biofilm effectiveness after sanitization with sodium hypochlorite was due to the high pH of this solution, which caused a deprotonation of the carboxylic acid groups of the functional coating. This fact conferred it a strong hydrophilicity and negatively charged its surface, which was favorable for preventing bacterial attachment and biofilm formation.

Antibiofilm coatings through atmospheric pressure plasma for 3D printed surgical instruments.

Recently, medical applications for 3D printing are expanding rapidly and are expected to revolutionize health care, specifically, manufacturing surgical guides and protective face mask against coronavirus (COVID-19). These instruments come in contact with the human tissues, being necessary 3D printed materials free of pathogenic microbes or other contaminants. Therefore, they must be sterilized to avoid that bacteria can attach to the surface and produce biofilm. With the aim of avoiding bacterial biofilm formation and minimize the health risks, acrylic acid (AcAc) coatings applied by plasma-polymerization have been deposited on 3D printed polylactic acid (PLA) Petri dishes. Six antimicrobial-resistant clinical and two susceptible control strains of Pseudomonas aeruginosa and Staphylococcus aureus species were analyzed. AcAc coatings provide the surface with greater hydrophilicity and, consequently, the formation of a hydration layer, whose thickness is related to the surface roughness. This hydration layer could explain the reduction of bacterial attachment and, consequently, the biofilm formation. Antibiofilm coatings are more successful against P. aeruginosa strains than against S. aureus ones; due to some coatings presents a smaller topography scale than the P. aeruginosa length, reducting the contact area between the bacteria and the coating, and causing a potential rupture of the cellular membrane. AcAc coatings with less number of plasma passes were more effective, and showed up to a 50% relative biofilm reduction (in six of the eight strains studied) compared with the untreated plates.