ABSTRACT
Purpose/Objective. Small-field measurement poses challenges. Although many high-resolution detectors are commercially available, the EPID for small-field dosimetry remains underexplored. This study aimed to evaluate the performance of EPID for small-field measurements and to derive tailored correction factors for precise small-field dosimetry verification.Material/Methods. Six high-resolution radiation detectors, including W2 and W1 plastic scintillators, Edge-detector, microSilicon, microDiamond and EPID were utilized. The output factors, depth doses and profiles, were measured for various beam energies (6 MV-FF, 6 MV-FFF, 10 MV-FF, and 10 MV-FFF) and field sizes (10 × 10 cm2, 5 × 5 cm2, 4 × 4 cm2, 3 × 3 cm2, 2 × 2 cm2, 1 × 1 cm2, 0.5 × 0.5 cm2) using a Varian Truebeam linear accelerator. During measurements, acrylic plates of appropriate depth were placed on the EPID, while a 3D water tank was used with five-point detectors. EPID measured data were compared with W2 plastic scintillator and measurements from other high-resolution detectors. The analysis included percentage deviations in output factors, differences in percentage for PDD and for the profiles, FWHM, maximum difference in the flat region, penumbra, and 1D gamma were analyzed. The output factor and depth dose ratios were fitted using exponential functions and fractional polynomial fitting in STATA 16.2, with W2 scintillator as reference, and corresponding formulae were obtained. The established correction factors were validated using two Truebeam machines.Results. When comparing EPID and W2-PSD across all field-sizes and energies, the deviation for output factors ranged from 1% to 15%. Depth doses, the percentage difference beyond dmax ranged from 1% to 19%. For profiles, maximum of 4% was observed in the 100%-80% region. The correction factor formulae were validated with two independent EPIDs and closely matched within 3%.Conclusion. EPID can effectively serve as small-field dosimetry verification tool with appropriate correction factors.
Subject(s)
Particle Accelerators , Radiometry , Radiometry/instrumentation , Radiometry/methods , Particle Accelerators/instrumentation , Equipment Design , Phantoms, Imaging , Calibration , Humans , Scintillation Counting/instrumentation , Scintillation Counting/methods , Reproducibility of ResultsABSTRACT
Lattice radiation therapy (LRT) is an advanced treatment approach specifically designed for massive tumors. It aims to deliver high-dose regions within tumors while ensuring the safety of the surrounding dose-limiting organs at risk (OAR). This case report introduces two unique clinical cases: a 63-year-old male diagnosed with a massive non-small cell lung cancer (NSCLC) tumor and a 61-year-old male with an inoperable recurrent left-sided adrenal mass intricately surrounded by dose-limiting bowel structures. Both patients underwent LRT to enhance tumor control and maintain less toxicity. Notably, both patients displayed a significant tumor volume reduction accompanied by minimal adverse effects during the 12-month follow-up period. While these initial results suggest that LRT may be effective and safe for treating large tumors, further investigation through exhaustive research and multicenter trials is necessary to fully understand and determine the specifics of lattice radiation therapy techniques.
ABSTRACT
PURPOSE: PerFRACTION™ is a three-dimensional (3D) in vivo electronic portal imaging device-based dosimetry software. To validate the software, three phantoms with different inserts (2D array, ionization chamber, and inhomogeneity materials) were constructed to evaluate point dose and fluence map. MATERIALS AND METHODS: Phantoms underwent independent computed tomography simulation for planning and received repetitive fractions of volumetric modulated arc therapy, simulating prostate treatment. Fluence and absolute point dose measurements, PerFRACTION™ reconstructed doses, and the dose predictions of the planning system were compared. RESULTS: There was concordance between ionization chamber and PerFRACTION™ 3D absolute point dose measurements. Close agreement was also obtained between X- and Y-axis dose profiles with PerFRACTION™ calculated doses, MapCHECK measured doses, and planning system predicted doses. Setup shifts significantly influenced 2D gamma passing rates in PerFRACTION™ software. CONCLUSIONS: PerFRACTION™ appears reliable and valid under experimental conditions in air and with phantoms.
