Impact of Weekly Teriparatide on the Bone and Mineral Metabolism in Hemodialysis Patients With Relatively Low Serum Parathyroid Hormone: A Pilot Study.

Adynamic bone disease in HD patients is characterized by skeletal resistance to parathyroid hormone (PTH) or suppression of PTH release, leading to a downregulated bone turnover and bone fracture. Hence, we examined the efficacy of weekly teriparatide for HD patients with low PTH indicating adynamic bone disease without a history of parathyroidectomy. Fifteen HD patients with low PTH were recruited in this prospective observational study. Of them, 10 received teriparatide for 12 months and five nontreated patients were enrolled as control. Primary outcomes were defined as the changes in bone mineral density and bone turnover markers. Bone mineral density at the lumbar spine increased by 3.7% and 2.5% at 6 and 12 months, respectively, and bone formation markers increased, while bone resorption markers did not change in the teriparatide group. At 12 months after teriparatide administration, endogenous PTH was secreted followed by the recovery of low bone turnover. 40% of patients in the teriparatide group dropped out due to adverse events and the most common adverse event was transient hypotension. This study suggests that weekly teriparatide for HD patients with low PTH in the absence of parathyroidectomy accelerates bone formation and bone turnover, leading to increased trabecular bone mass and secretion of endogenous PTH.

Analyzing the characteristics of rising from the bed in patients having undergone total hip arthroplasty immediately after surgery.

BACKGROUND: Immediately after patients undergo total hip arthroplasty (THA), they are often coached through the process of rising from the bed to prevent dislocation. However, motion analysis of this process, which can guide coaching methods, has not been conducted. The purpose of this study was to clarify whether there is a difference in hip joint angle, rise time, pain, and difficulty based on the method of rising from the bed in postoperative patients, immediately after THA. METHODS: Twenty patients who underwent THA were enrolled in this study. Seven days after surgery, 3-D motion analysis was performed while subjects rose from the bed using six different methods that include rising from the bed using either the affected or non-affected side either with or without assistance. Hip joint angle, rise time, pain, and difficulty were evaluated. RESULTS: In all six methods, the maximal hip joint angle of the affected side was in the safe range. The maximal hip adduction angle and adduction angle at maximum flexion of the affected side were significantly lower in patients who rose from the bed using their affected side than in those who rose using their non-affected side. There were no differences in maximal hip flexion angle, internal rotation angle, internal rotation angle at maximum flexion of the affected side, rise time, pain, or difficulty regardless of the direction of rising from the bed or the use of assistance. SIGNIFICANCE: Coaching patients to rise from the bed is better performed when using the most optimal method that takes into consideration the movement direction and patient's individuality.

Spinal anesthesia increases the risk of venous thromboembolism in total arthroplasty: Secondary analysis of a J-PSVT cohort study on anesthesia.

Clinical guidance on the choice of anesthetic modality vis-à-vis the risk of perioperative venous thromboembolism (VTE) is largely lacking because of a paucity of recent evidence. A comparative effect of general anesthesia and neuraxial blockade on the perioperative incidence of VTE has not been well-investigated.We compared the effects of different types of anesthetic modalities on the risk of VTE after total hip arthroplasty (THA) and total knee arthroplasty (TKA).This is a secondary analysis of the Japanese Study of Prevention and Actual Situation of Venous Thromboembolism after Total Arthroplasty (J-PSVT). Data pertaining to a total of 2162 patients who underwent THA and TKA at 34 hospitals were included in this analysis. We compared the different anesthetic modalities with respect to the incidence of VTE. The composite end-point was asymptomatic/symptomatic deep vein thrombosis detected using scheduled bilateral ultrasonography up to postoperative day (POD) 10 and fatal/non-fatal pulmonary embolism up to POD 10.The study groups were as follows: general anesthesia (n = 646), combined epidural/general anesthesia (n = 1004), epidural anesthesia (n = 87), and spinal anesthesia (n = 425). On multivariate analysis, only spinal anesthesia was associated with a significant increase in the risk of VTE as compared with that associated with general anesthesia. Propensity score-matched analysis for "combined epidural/general anesthesia group" versus "spinal anesthesia group" demonstrated a 48% higher incidence of VTE (relative risk = 1.48, 95% confidence interval [CI] 1.18-1.85) in the latter.Spinal anesthesia was associated with a higher risk of postoperative VTE, as compared with that associated with combined epidural/general anesthesia, in patients undergoing total arthroplasty.

Polyethylene Wear Associated With 26- and 32-mm Heads in Total Hip Arthroplasty: A Multicenter, Prospective Study.

BACKGROUND: Although there were many clinical studies of highly cross-linked polyethylene (XLPE) wear among different femoral head diameters, few referred to thickness of XLPE in case larger femoral heads were used because smaller sockets were frequently used for Asian population. METHODS: This prospective study included 240 hips that underwent primary total hip arthroplasty using XLPE combined with 26-mm (group S) or 32-mm (group L) cobalt-chromium head with maximum follow-up of 10 years. We measured 3-dimensional (3-D) linear penetration rate of XLPE among same implant design groups except head diameter and estimated the validity of thinner XLPE. RESULTS: Our study demonstrated comparable 3-D linear penetration rates, which were 0.06 ± 0.07 mm/y for group S and 0.03 ± 0.02 mm/y for group L at 10 years after surgery and penetration rates seemed to be almost constant with no significant difference after 3 years. Minimum liner thickness (5.3 mm for 48-mm socket in combination with 32-mm femoral head) and the second thinnest XLPE (6.3 mm in case of socket from 50 mm to 54 mm combined with 32-mm femoral head) was distributed in 25% and 72% with group L, respectively, and there were no significant differences in penetration rates between 5.3-mm- and 6.3-mm-thickness groups. CONCLUSION: Our study suggested that whether to select 26- or 32-mm diameters of femoral head does not affect XLPE wear in combination with this type of articulation.

Venous thromboembolism after total joint arthroplasty: results from a Japanese multicenter cohort study.

INTRODUCTION: Real-world evidence of the effectiveness of pharmacological thromboprophylaxis for venous thromboembolism (VTE) is limited. Our objective was to assess the effectiveness and safety of thromboprophylactic regimens in Japanese patients undergoing joint replacement in a real-world setting. METHOD: Overall, 1,294 patients (1,073 females and 221 males) who underwent total knee arthroplasty (TKA) and 868 patients (740 females and 128 males) who underwent total hip arthroplasty (THA) in 34 Japanese national hospital organization (NHO) hospitals were enrolled. The primary efficacy outcome was the incidence of deep vein thrombosis (DVT) detected by mandatory bilateral ultrasonography up to post-operative day (POD) 10 and pulmonary embolism (PE) up to POD28. The main safety outcomes were bleeding (major or minor) and death from any cause up to POD28. RESULTS: Patients undergoing TKA (n = 1,294) received fondaparinux (n = 360), enoxaparin (n = 223), unfractionated heparin (n = 72), anti-platelet agents (n = 45), or no medication (n = 594). Patients undergoing THA (n = 868) received fondaparinux (n = 261), enoxaparin (n = 148), unfractionated heparin (n = 32), anti-platelet agents (n = 44), or no medication (n = 383). The incidence rates of sonographically diagnosed DVTs up to POD10 were 24.3% in patients undergoing TKA and 12.6% in patients undergoing THA, and the incidence rates of major bleeding up to POD28 were 1.2% and 2.3%, respectively. Neither fatal bleeding nor fatal pulmonary embolism occurred. Significant risk factors for postoperative VTE identified by multivariate analysis included gender (female) in both TKA and THA groups and use of a foot pump in the TKA group. Only prophylaxis with fondaparinux reduced the occurrence of VTE significantly in both groups. Propensity score matching analysis (fondaparinux versus enoxaparin) showed that the incidence of DVT was lower (relative risk 0.70, 95% confidence interval (CI) 0.58 to 0.85, P = 0.002 in TKA and relative risk 0.73, 95% CI 0.53 to 0.99, P = 0.134 in THA) but that the incidence of major bleeding was higher in the fondaparinux than in the enoxaparin group (3.4% versus 0.5%, P = 0.062 in TKA and 4.9% versus 0%, P = 0.022 in THA). CONCLUSIONS: These findings indicate that prophylaxis with fondaparinux, not enoxaparin, reduces the risk of DVT but increases bleeding tendency in patients undergoing TKA and THA. TRIAL REGISTRATION: University Hospital Medical Information Network Clinical Trials Registry: UMIN000001366. Registered 11 September 2008.

Comparison of femoral morphology and bone mineral density between femoral neck fractures and trochanteric fractures.

BACKGROUND: Many studies that analyzed bone mineral density (BMD) and skeletal factors of hip fractures were based on uncalibrated radiographs or dual-energy xray absorptiometry (DXA). QUESTIONS/PURPOSES: Spatial accuracy in measuring BMD and morphologic features of the femur with DXA is limited. This study investigated differences in BMD and morphologic features of the femur between two types of hip fractures using quantitative computed tomography (QCT). PATIENTS AND METHODS: Forty patients with hip fractures with normal contralateral hips were selected for this study between 2003 and 2007 (trochanteric fracture, n=18; femoral neck fracture, n=22). Each patient underwent QCT of the bilateral femora using a calibration phantom. Using images of the intact contralateral femur, BMD measurements were made at the point of minimum femoral-neck cross-sectional area, middle of the intertrochanteric region, and center of the femoral head. QCT images also were used to measure morphologic features of the hip, including hip axis length, femoral neck axis length, neck-shaft angle, neck width, head offset, anteversion of the femoral neck, and cortical index at the femoral isthmus. RESULTS: No significant differences were found in trabecular BMD between groups in those three regions. Patients with trochanteric fractures showed a smaller neck shaft angle and smaller cortical index at the femoral canal isthmus compared with patients with femoral neck fractures. CONCLUSIONS: We conclude that severe osteoporosis with thinner cortical bone of the femoral diaphysis is seen more often in patients with trochanteric fracture than in patients with femoral neck fracture. LEVELS OF EVIDENCE: Level IV, prognostic study. See Guidelines for Authors for a complete description of levels of evidence.

Safety of autologous bone marrow-derived mesenchymal stem cell transplantation for cartilage repair in 41 patients with 45 joints followed for up to 11 years and 5 months.

Among autologous somatic stem cells, bone marrow-derived mesenchymal stem cells (BMSCs) are the most widely used worldwide to repair not only mesenchymal tissues (bone, cartilage) but also many other kinds of tissues, including heart, skin, and liver. Autologous BMSCs are thought to be safe because of the absence of immunological reaction and disease transmission. However, it is possible that they will form tumours during long-term follow-up. In 1988, we transplanted autologous BMSCs to repair articular cartilage, which was the first such trial ever reported. Subsequently we performed this procedure in about 40 patients. Demonstration that neither partial infections nor tumours appeared in these patients provided strong evidence for the safety of autologous BMSC transplantation. Thus, in this study we checked these patients for tumour development and infections. Between January 1998 and November 2008, 41 patients received 45 transplantations. We checked their records until their last visit. We telephoned or mailed the patients who had not visited the clinics recently to establish whether there were any abnormalities in the operated joints. Neither tumours nor infections were observed between 5 and 137 (mean 75) months of follow-up. Autologous BMSC transplantation is a safe procedure and will be widely used around the world.

Tailor-made Surgical Guide Reduces Incidence of Outliers of Cup Placement.

UNLABELLED: Malalignment of the cup in total hip arthroplasty (THA) increases the risks of postoperative complications such as neck cup impingement, dislocation, and wear. We asked whether a tailor-made surgical guide based on CT images would reduce the incidence of outliers beyond 10 degrees from preoperatively planned alignment of the cup compared with those without the surgical guide. We prospectively followed 38 patients (38 hips, Group 1) having primary THA with the conventional technique and 31 patients (31 hips, Group 2) using the surgical guide. We designed the guide for Group 2 based on CT images and fixed it to the acetabular edge with a Kirschner wire to indicate the planned cup direction. Postoperative CT images showed the guide reduced the number of outliers compared with the conventional method (Group 1, 23.7%; Group 2, 0%). The surgical guide provided more reliable cup insertion compared with conventional techniques. LEVEL OF EVIDENCE: Level II, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

Tailor-made surgical guide based on rapid prototyping technique for cup insertion in total hip arthroplasty.

BACKGROUND: A surgical guide made by the rapid prototyping (RP) technique for cup insertion in total hip arthroplasty might be useful to avoid malalignment of the cup, which indicates postoperative complications. METHODS: To address this research question, we applied a RP-based guide to 24 patients with their CT images. We designed it to fit onto the acetabular edge and to insert a Kirschner wire (K-wire) which indicated a planned cup direction. We intraoperatively placed it on the acetabular edge, inserted the K-wire through the guide on the superior acetabulum and implanted the cup while observing the alignment of the K-wire. We also recorded the additional time needed to use the guide. RESULTS: The mean cup accuracy between planned and postoperative alignments was 2.8 degrees (SD = 2.1 degrees ) for abduction and 3.7 degrees (SD = 2.7 degrees ) for anteversion. The mean additional time was 3.5 (range 2-6) min. CONCLUSION: We can use this guide with acceptable accuracy and without consuming an excessive amount of time.

Robot-assisted femoral fracture reduction: preliminary study in patients and healthy volunteers.

We developed a robot-assisted fracture reduction system (FRAC-Robo) to assist anatomical reduction and to maintain reduction during internal fixation while recording the procedure in a log. We conducted two experiments before using FRAC-Robo clinically. In the first experiment using the FRAC-Robo system, we measured the maximum force and torque required to pull and rotate the limbs of healthy conscious volunteers until they felt pain or abnormality. The average maximum traction force applied to the lower limb was 250.7 N, and the average maximum torque was 5.6 Nm in internal rotation and 7.6 Nm in external rotation for 30 degrees of abduction of hip. In the second experiment, we measured the traction force and rotation torque during the reduction of proximal femoral fractures. The average traction force and rotation torque needed for reduction were 215.9 N and 3.2 Nm, respectively. On the basis of these results, we consider that FRAC-Robo can generate sufficient force and torque to reduce femoral fractures safely.

Fluoroscopic bone fragment tracking for surgical navigation in femur fracture reduction by incorporating optical tracking of hip joint rotation center.

A new method for fluoroscopic tracking of a proximal bone fragment in femoral fracture reduction is presented. The proposed method combines 2-D and 3-D image registration from single-view fluoroscopy with tracking of the head center position of the proximal femoral fragment to improve the accuracy of fluoroscopic registration without the need for repeated manual adjustment of the C-arm as required in stereo-view registrations. Kinematic knowledge of the hip joint, which has a positional correspondence with the femoral head center and the pelvis acetabular center, allows the position of the femoral fragment to be determined from pelvis tracking. The stability of the proposed method with respect to fluoroscopic image noise and the desired continuity of the fracture reduction operation is demonstrated, and the accuracy of tracking is shown to be superior to that achievable by single-view image registration, particularly in depth translation.

Modulation of peritendinous adhesion formation by alginate solution in a rabbit flexor tendon model.

To examine the antiadhesive effect of an alginate solution following tendon surgery, unilateral subtotal laceration of the flexor digitorum communis tendon was created in one hind limb while the other side was left intact in 32 Japanese white rabbits. The lesion was coated with alginate solution in 16 animals and not coated in the other 16. Degree of adhesion formation was assessed histologically and biomechanically by measuring the flexion angle of the first toe when the flexor digitorum tendon was pulled with a specified force at 4 weeks postoperatively. When compared with the control group, the alginate-treated group demonstrated significantly greater toe flexion, with less scar tissue formation at the repair site. Histologically, complete tendon healing with longitudinal remodeling of collagen fibers was observed in the alginate-treated group, while a random pattern of fibers was observed in the control group. Reduction in adhesion formation using alginate solution represents a novel strategy for the management of tendon injury and repair in the clinical setting.

Huge pelvic mass secondary to wear debris causing ureteral obstruction.

We report an unusual granulomatous reaction of wear debris that produced a huge pelvic mass causing ureteral obstruction. A 72-year-old woman, who received a cemented total hip arthroplasty 30 years ago, was referred to the department of gynecology for examination of a pelvic mass. A computed tomography scan revealed a huge homogenous mass, measuring approximately 20 x 16 x 12 cm, including extensive osteolysis of the left pelvis around the acetabular component. Intravenous pyelogram revealed complete obstruction of the left ureter resulting in hydronephrosis of the left kidney. Histological examination from the biopsy specimen detected polyethylene wear debris in the mass.

Wear analysis of retrieved ceramic-on-ceramic articulations in total hip arthroplasty: Femoral head makes contact with the rim of the socket outside of the bearing surface.

We investigated articular bearing surfaces retrieved from three patients with ceramic-on-ceramic total hip arthroplasties using high-quality alumina. The duration of implantation was 3.5, 3.0, and 2.5 years, respectively. Dislocation of the hip joint after implantation did not occur in any patients. The retrieved prostheses were examined by stereomicroscopy and scanning electron microscopy (SEM). In the main load-bearing area, no wear marks were seen in any sockets. However, in all three cases, stripe scars were observed at the rim of the alumina inlay under stereomicroscopy, despite the lack of indentation in the socket and the stem, which suggests impingement. Such scars were not observed on the load-bearing surface. Under SEM, the scars showed excessive wear, including material excavation, that has not been observed in conventional hip simulator experiments. These findings are similar to those of experiments in which a simulator was programmed to distract the femoral head from the socket. The present results suggest that the femoral head can separate from the socket without neck-socket impingement in vivo.

Fibroblast growth factor-2 promotes the repair of partial thickness defects of articular cartilage in immature rabbits but not in mature rabbits.

OBJECTIVE: To investigate cartilage response to fibroblast growth factor-2 (FGF-2) with increasing age in vivo, we examined the effect of FGF-2 on partial thickness defects of immature and mature rabbits. DESIGN: Sixty-nine Japanese white rabbits (34 immature rabbits, 35 mature rabbits) were examined. We made experimental partial thickness defects in articular cartilage of the knees. Then, we injected FGF-2 into the knees eight times, immediately after surgery and every 2 days for 2 weeks. A single dose of FGF-2 was 10 ng/0.1 ml or 100 ng/0.1 ml. In the control group, 0.1 ml saline was injected on the same time schedule. The rabbits were sacrificed at intervals following surgery that ranged from 2 to 48 weeks. The specimens were stained with toluidine blue and examined microscopically. We used a modified semiquantitative scale for evaluating the histological appearance of repair. RESULTS: In immature rabbits, the cartilage repair in the FGF-2 (100 ng)-treated group was significantly better than that of the other groups. The defects were almost completely repaired with chondrocytes that showed a round to polygonal morphology, and large amounts of extracellular matrix with intense metachromatic staining. In mature rabbits, however, there was apparently no effect from FGF-2 in either group. CONCLUSIONS: Application of FGF-2 facilitated cartilage repair in partial thickness defects in immature rabbits, but not in mature ones.

Correlation between femoral neck version and strain on the femur after insertion of femoral prosthesis.

Stress analysis on the femur after insertion of a femoral prosthesis with a modular interchangeable neck with adjustable neck version was performed using in vitro experimental procedures and cemented strain gauges. Although strain on the anterior and posterior aspects was less than on the medial and lateral aspects, it was more markedly affected by adjusting the interchangeable neck from straight to anteverted (or retroverted) than strain on the medial and lateral aspects, particularly around the stem tip. There was a highly significant correlation between compressive strain on the side toward which the prosthetic neck was oriented and the extent of neck version, whether anteverted or retroverted. Insertion of a femoral implant in excessive anteversion (or retroversion) may cause noticeably increased stress on the anterior and posterior aspects of the proximal femoral shaft.

Hydroxyapatite composite resin cement augmentation of pedicle screw fixation.

Pedicle screw stability is poor in osteopenic vertebrae attributable, in part, to low screw-bone interface strength. The current authors examined cement augmentation using a low curing temperature hydroxyapatite and bis-phenol-A glycidol methacrylate-based composite resin. This cement may stiffen the screw-bone interface and reduce the harmful effects associated with polymethylmethacrylate regarding temperature and toxic monomer. Thirty-five lumbar vertebrae from human cadavers were instrumented with pedicle screws, with one pedicle previously injected with cement and the other as the control. Caudocephalad toggling of +/- 1 mm for 1600 cycles was applied to the pedicle screws, and the resulting forces supported by the implant-bone interface were captured by a load cell. A curve was constructed from the peak caudal load for each cycle and three mechanical measures parameterized this curve: (1) initial load; (2) rate of load decay during the first 400 cycles; and (3) final load. The initial load increased by 16% as a result of cement augmentation, the final load increased by 65%, and the rate of load decay decreased by 59%. Cement augmentation of pedicle screws increased the stiffness and stability of the screw-bone interface.