Human serum N-glycome profiling via the newly developed asparagine immobilized cellulose/polymer nanohybrid.

Human serum N-linked glycans expression levels change during the disease progression. The low abundance, structural diversity, and coexisting matrices hinder their detection in mass spectrometry analysis. Considering the hydrophilic nature of N-glycans, cellulose/polymer (1,2-Epoxy-5-hexene) nanohybrid is fabricated with oxirane groups functionalized of asparagine to develop solid phase extraction based hydrophilic interaction liquid chromatography sorbent (cellulose/1,2-Epoxy-5-hexene/asparagine). The morphology, elemental analysis, and surface properties are studied through scanning electron microscopy, energy dispersive X-ray spectroscopy, and Fourier-transform infrared spectroscopy. The large surface area of cellulose/polymer nanohybrid (2.09 × 102  m2 /g) facilitates the high density of asparagine immobilization resulting in better hydrophilic interaction liquid chromatography enrichment under optimized conditions. The enrichment capability of nanohybrid/asparagine is assessed by the N-Linked glycans released from ovalbumin and immunoglobulin G where 23 and 13 N-glycans are detected respectively. The nanohybrid/asparagine shows selectivity of 1:1200 with spiked bovine serum albumin and sensitivity down to 100 attomole. Human serum profiling for N-glycans identifies 52 glycan structures. This new enrichment strategy enriches serum N-linked glycans in the presence of salts, proteins, endogenous serum peptides, and so forth.

Terpolymeric platform with enhanced hydrophilicity via cysteic acid for serum intact glycopeptide analysis.

A new polymeric (methyl methacrylate/ethylene glycol dimethacrylate/1,2-epoxy-5-hexene) base/matrix has been fabricated and decorated with zwitterionic hydrophilic cysteic acid (Cya) for the enrichment of intact N-glycopeptides from standards and biological samples. Terpolymer-Cya provides good enrichment efficiency, improved hydrophilicity, and selectivity by virtue of better surface area (2.09 × 102 m2/g) provided by terpolymer and the zwitterionic property offered by cysteic acid. Cysteic acid-functionalized polymeric hydrophilic interaction liquid chromatography (HILIC) sorbent enriches 35 and 24 N-linked glycopeptides via SPE (solid phase extraction) mode from tryptic digests of model glycoproteins, i.e., immunoglobulin G (IgG) and horseradish peroxidase (HRP), respectively. Zwitterionic chemistry of cysteine helps in achieving higher selectivity with BSA digest (1:200), and lower detection limit down to 100 attomoles with a complete glycosylation profile of each standard digest. The recovery of 81% and good reproducibility define the application of terpolymer-Cya for complex samples like a serum. Analysis of human serum provides a profile of 807 intact N-linked glycopeptides via nano-liquid chromatography-tandem mass spectrometry (nLC-MS/MS). To the best of our knowledge, this is the highest number of glycopeptides enriched by any HILIC sorbent. Selected glycoproteins are evaluated in link to various cancers including the breast, lung, uterine, and melanoma using single-nucleotide variances (BioMuta). This study represents the complete idea of using an in-house developed strategy as a successful tool to help analyze, relate, and answer glycoprotein-based clinical issues regarding cancers.

Iminodiacetic acid (IDA)-generated mesoporous nanopolymer: a template to relate surface area, hydrophilicity, and glycopeptides enrichment.

A three-step strategy is introduced to develop inherent iminodiacetic (IDA)-functionalized nanopolymer. SEM micrographs show homogenous spherical beads with a particle size of 500 nm. Further modification to COOH-functionalized 1,2-epoxy-5-hexene/DVB mesoporous nanopolymer enriches glycopeptides via hydrophilic interactions followed by their MS determination. Significantly high BET surface area 433.4336 m2 g-1 contributes to the improved surface hydrophilicity which is also shown by high concentration of ionizable carboxylic acids, 14.59 ± 0.25 mmol g-1. Measured surface area is the highest among DVB-based polymers and in general much higher in comparison to the previously reported BET surface areas of co-polymers, terpolymers, MOFs, and graphene-based composites. Thirty-one, 19, and 16 N-glycopeptides are enriched/identified by nanopolymer beads from tryptic digests of immunoglobulin G, horseradish peroxidase, and chicken avidin, respectively, without additional desalting steps. Material exhibits high selectivity (1:400 IgG:BSA), sensitivity (down to 0.1 fmol), regeneration ability up to three cycles, and batch-to-batch reproducibility (RSD > 1%). Furthermore, from 1 µL of digested human serum, 343 N-glycopeptide characteristics of 134 glycoproteins including 30 FDA-approved serum biomarkers are identified via nano-LC-MS/MS. The developed strategy to self-generate IDA on polymeric surface with improved surface area, porosity, and ordered morphology is insignia of its potential as chromatographic tool contributing to future developments in large-scale biomedical glycoproteomics studies.

Apo-H (beta-2-glycoprotein) intact N-glycan analysis by MALDI-TOF-MS using sialic acid derivatization.

Apo-H is a plasma glycoprotein. Nearly 19% of the molecular weight of this protein is composed of glycans. Up- and down-regulation and structural changes in protein glycans provide diagnostic value for disease detection. Here, an efficient, sensitive, and optimized method is developed for Apo-H N-glycans analysis by MALDI-TOF-MS in positive mode. This bioanalytical method includes sample preparation, sample purification, and detection. An Apo-H enrichment method is developed using standard proteins by anti-Apo-H beads followed by enrichment from plasma samples. SDS-PAGE confirms the Apo-H protein enrichment, which is further verified by LC-MS/MS analysis. The lower ionization efficiency of sialylated glycan hampers their analysis by MALDI-MS. For this, stabilization of sialic acids is done by selective derivatization of carboxyl groups to differentiate between α(2,3)- and α(2,6)-linked sialic acids. Glycans are further purified by HILIC-SPE and analyzed by MALDI-MS. Several branched bi- and tri-antennary glycans with fucosylation and sialylation are identified. The reproducibility of the developed method is tested by analyzing multiple replicates of human plasma, where the same glycans are consistently identified. This method could be applied for the Apo-H glycan profiling of large clinical cohorts for diagnostic purposes.

Graphene oxide-metal oxide nanocomposites for on-target enrichment and analysis of phosphorylated biomolecules.

The surface of matrix-assisted laser desorption/ionization mass spectrometry target is modified for improved signal strength and detection of analytes. The developed method includes on-target enrichment and detection of phosphopeptides/phospholipids using graphene oxide-lanthanide metal oxides (samarium, gadolinium, dysprosium, and erbium) nanocomposites. Enriched phosphopeptides are detected using material enhanced laser desorption/ionization mass spectrometry and phospholipids by laser desorption/ionization-mass spectrometry. Nanocomposites are prepared using graphene oxide with respective metal salts at high pH. They are characterized for nano-morphology, chemistry, porosity, composition, crystallinity, and thermal stability. Phosphopeptides enrichment protocol is developed and optimized for tryptic ß-casein digest and that of phospholipids by phosphatidylcholine standard. Statistical analyses of phosphopeptides and phospholipids from milk show overlapping results for gadolinium, dysprosium, and erbium oxide nanocomposites. GO-Gd2 O3 has better enrichment efficiency and application as LDI material. Selectivity for GO-Dy2 O3 is 1:2500, for GO-Sm2 O3 is 1:3500, and 1:4000 for GO-Gd2 O3 . GO-Er2 O3 has a sensitivity of 25 fmol, whereas the highest sensitivity is down to 0.5 fmol for GO-Gd2 O3 . On-target enrichment is batch to batch reproducible with a standard deviation of <1, reduced time of enrichment to 10 min, and ease of operation compared to solid-phase batch extraction. The developed method enriches serum phosphopeptides characteristic of cancer-related phosphoproteins.

Tellurium doped zinc imidazole framework (Te@ZIF-8) for quantitative determination of hydrogen peroxide from serum of pancreatic cancer patients.

The tellurium doped zinc imidazole framework (Te@ZIF-8) is prepared by a two-step hydrothermal strategy for the electrochemical sensing of hydrogen peroxide. Material is characterized by transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The electrochemical characterization of the MOF modified electrode is done by a three-electrode system. Electrochemical sensing of hydrogen peroxide is made by cyclic voltammetry, amperometry, and impedance measurements. Results demonstrate that Te@ZIF-8 shows a detection limit of 60 µM with linearity up to 0.98855. Material is stable to 1000 cycles with no significant change in electrochemical response. Amperometry depicts the recovery of hydrogen peroxide from human serum up to 101%. Impedance curve reveals the surface of Te@ZIF-8-GCE (glassy carbon electrode) as porous and rough and an interface is developed between analyte ions and the sensing material. Finally, the modified electrode is used for the quantitative determination of hydrogen peroxide from serum samples of pancreatic cancer patients, diagnosed with CA 19-9.

Highly porous terpolymer-ZIF8@BA MOF composite for identification of mono- and multi-glycosylated peptides/proteins using MS-based bottom-up approach.

A hydrophilic terpolymer MOF composite is designed with high surface area and porosity to enrich mono- and multi-glycosylated peptides facilitating a bottom-up approach. Terpolymer@ZIF-8 is synthesized using free radical polymerization followed by layer by layer ZIF-8 fabrication. Subsequent surface modification was made by aminophenylboronic acid (AMBA). The enrichment ability of terpolymer@ZIF-8@BA is evaluated by using tryptic digest of IgG and HRP to exemplify mono- and multi-glycosylated protein samples. Improved selectivity of 1:200 for spiked HRP in BSA digest and sensitivity down to 1 fmol µL-1 is achieved. Batch to batch reproducibility is better 1% RSD which favors the adoption of the developed method for routine N-linked glycopeptide/protein determination. Cost-effective nature of given approach is given by regeneration of the material up to four cycles. Total 318 N-linked glycopeptides have been identified from 1 µL human serum digest after subjecting the enriched and PNGase-treated deglycosylated peptides to LC-MS. Thus, terpolymer@ZIF-8@BA holds the potential both for mono- and multi-glycosylated peptides from complex biological sample. Graphical abstract.

Boronic acid functionalized MOFs as HILIC material for N-linked glycopeptide enrichment.

Highly specific enrichment of N-linked glycopeptides from complex biological samples is crucial prior to mass spectrometric analysis. In this work, a hydrophilic metal-organic framework composite is prepared by the growth of UiO-66-NH2 on graphene sheets, followed by its post-synthetic modification to attach boronic acid to form GO@UiO-66-PBA. The fabrication of graphene oxide-MOF composite results in enhanced surface area with improved thermal and chemical stability. The synthesized MOF nanocomposite is characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and BET. A crystalline structure with high porosity offering large surface area and good hydrophilicity of the nanocomposite assists as an enrichment tool in glycoproteomics. The GO@UiO-66-PBA nanocomposite selectively enriches N-linked glycopeptides from tryptic digests of horseradish peroxidase (HRP) and immunoglobulin (IgG). GO@UiO-66-PBA nanoparticles show a low detection limit (1 fmol) and good specificity (1:200), reusability and reproducibility for N-linked glycopeptide enrichment from IgG digest. The binding capacity of GO@UiO-66-PBA is 84 mg/g for protein concentration, with a good recovery of 86.5%. A total of 372 N-linked glycopeptides corresponding to different glycoproteins are identified from only 1 µL of human serum digest. Thus, the presented research work can be an efficient separation platform for N-linked glycopeptide enrichment from complex samples, which can be extended to cost-effective routine analysis. Graphical abstract.

Boronic acid functionalized fibrous cellulose for the selective enrichment of glycopeptides.

Enrichment of glycoproteins has been important because of their dynamicity and role in biological systems. Study of glycoproteins is complex because of the simultaneous glycosylation and deglycosylation inside the body. Often employed affinities for glycopeptides are hydrazide, boronic acid, or physiosorbed lectin on support materials. Cellulose, a natural polysaccharide, has rich surface chemistry, stable structure, low cost and availability in different variants. In present study, fibrous cellulose is oxidized using periodate to modify with boronic acid. Attachment of boronic acid is confirmed by Fourier transform infrared spectroscopy. Particle size and morphology of boronic acid@fibrous cellulose is studied by scanning electron microscopy. The enrichment efficiency is evaluated by using horseradish peroxidase as model protein. Boronic acid@fibrous cellulose is selective up to 1:250 for spiked horseradish peroxidase in bovine serum albumin digest, sensitive down to 0.1 femtomol and recovering 88.15% glycopeptides. Moreover, protein binding capacity is determined as 213 mg/g and 41% sequence coverage of horseradish peroxidase protein with all eight glycosylation sites detected. Total of 18 glycopeptides are enriched from immunoglobulin digest showing ability of boronic acid@fibrous cellulose to enrich glycoproteins from multiglycoforms. Enrichment from human serum recovers 18% extracellular and 72% secreted glycoproteins via bottom-up approach and online tools.

Fabrication of Piperazine Functionalized Polymeric Monolithic Tip for Rapid Enrichment of Glycopeptides/Glycans.

Enrichment strategies are designed for the pretreatment of low-abundance glycans and glycopeptides prior to mass spectrometric (MS) analysis. Here, a tip-based strategy is being reported for the enrichment of glycopeptides and glycans using a piperazine modified polymeric monolithic tip. The tip is fabricated using the free radical polymerization. Fast separation (2 min) is achieved under optimized conditions with 20 cycles per step of loading, incubation, washing, and elution followed by MALDI-MS analysis. A total of 25, 22, and 34 glycopeptides covering all glycosylation sites are enriched by the modified tips from tryptic digests of horse radish peroxidase, chicken avidin, and human immunoglobulin G, respectively. Piperazine exhibits high selectivity 1:400 horse radish peroxidase/bovine serum albumin, sensitivity to 100 attomoles, recovery 89.51%, and batch to batch reproducibility (RSD > 1) in glycopeptides enrichment. Piperazine tips also enrich glycans from ovalbumin and human immunoglobulin G. High selectivity (1:1200, ovalbumin/BSA) and detection limit of 100 attomole is attained for glycans and furthermore 58 glycans are enriched from human serum. Thus, piperazine tips can be used as an enrichment tool for swift, cost-effective routine analysis of biological samples for separation of glycopeptides and glycans.

Hydrazide-functionalized affinity on conventional support materials for glycopeptide enrichment.

In affinity chromatography, enrichment of biomolecules is dependent on the selection of affinity sites immobilized onto a suitable support material. A few hydrazide - functionalized materials with surface modification protocols compatible to conventional support materials like silica and cellulose are reported. The study demonstrates the modification/derivatization pathways that can be adopted to modify the support materials with similar surface chemistry like cellulose, poly(GMA/DVB), or diamond. Poly(GMA/DVB) and cellulose represent hydrophilic supports whereas diamond is a hydrophobic support material. SEM images of three materials provide surface morphology whereas FT-IR confirms reaction completion and derivatization. These hydrazide - functionalized materials are applied to fetuin digest for glycopeptides enrichment and subsequently for selectivity and sensitivity assessment. Statistically, poly(GMA/DVB) shows 85.7% sensitivity with specificity of 88.8% in the enrichment experiments. Diamond offers hydrophobic interactions to non-glycopeptides and they co-elute with glycopeptides, resulting in reduced sensitivity down to 69.2%. Poly(GMA/DVB) shows recovery up to 89%, while recovery for cellulose and diamond is 83 and 71%, respectively. The materials enrich mono-N-linked-glycosylated peptide from tryptic digest of chicken avidin spiked in fetuin digest. The hydrazide group density on cellulose, poly(GMA/DVB), and diamond is 2.8, 2.3, and 2.1 mmol/g, respectively; this contributes towards the specificity and sensitivity of designed materials. The materials are also applied to serum samples and enriched glycopeptides characteristic of serum glycoproteins of clinical importance. Therefore this study provides routes for the economical surface modifications of support materials and to fabricate affinity materials with improved efficiency. Graphical Abstract Glycopeptides enrichment by hydrazine affinity.