ABSTRACT
In the application of lasers in dentistry, there is a delicate balance between the benefits gained from laser treatment and the heat-related damage arising from laser irradiation. Hence, it is necessary to understand the different processes associated with the irradiation of lasers on dental materials. To obtain insight for the development of a safe and general-purpose laser for dentistry, the present study examines the physical effects associated with the irradiation of a near-infrared free-electron laser (FEL) on the surface of a commonly used silver dental alloy. The irradiation experiments using a 2900-nm FEL confirmed the formation of a pit in the dental alloy. The pit was formed with one macro-pulse of FEL irradiation, therefore, suggesting the possibility of efficient material processing with an FEL. Additionally, there was only a slight increase in the silver alloy temperature (less than 0.9 °C) despite the long duration of FEL irradiation, thus inferring that fixed prostheses in the oral cavity can be processed by FEL without thermal damage to the surrounding tissue. These results indicate that dental hard tissues and dental materials in the oral cavity can be safely and efficiently processed by the irradiation of a laser, which has the high repetition rate of a femtosecond laser pulse with a wavelength around 2900 nm.
Subject(s)
Dental Alloys/radiation effects , Electrons , Infrared Rays , Lasers , Silver/radiation effects , Temperature , Time Factors , X-Ray DiffractionABSTRACT
The present animal study investigated whether oral intake of synthetic bone mineral (SBM) improves peri-implant bone formation and bone micro architecture (BMA). SBM was used as an intervention experimental diet and AIN-93M was used as a control. The SBM was prepared by mixing dicalcium phosphate dihydrate (CaHPO4·2H2O) and magnesium and zinc chlorides (MgCl2 and ZnCl2, respectively), and hydrolyzed in double-distilled water containing dissolved potassium carbonate and sodium fluoride. All rats were randomly allocated into one of two groups: a control group was fed without SBM (n = 18) or an experimental group was fed with SBM (n = 18), at seven weeks old. At 9 weeks old, all rats underwent implant surgery on their femurs under general anesthesia. The implant was inserted into the insertion socket prepared at rats' femur to a depth of 2.5 mm by using a drill at 500 rpm. Nine rats in each group were randomly selected and euthanized at 2 weeks after implantation. The remaining nine rats in each group continued their diets, and were euthanized in the same manner at 4 weeks after implantation. The femur, including the implant, was removed from the body and implant was pulled out by an Instron universal testing machine. After the implant removal, BMA was evaluated by bone surface ratio (BS/BV), bone volume fraction (BV/TV), trabecular thickness (TbTh), trabecular number (TbN), trabecular star volume (Vtr), and micro-CT images. BS/BV, BV/TV, TbTh and Vtr were significantly greater in the rats were fed with SBM than those were fed without SBM at 2 and 4 weeks after implantation (P < 0.05). The present results revealed that SBM improves the peri-implant formation and BMA, prominent with trabecular bone structure. The effect of SBM to improve secondary stability of the implant, and shortening the treatment period should be investigated in the future study.
ABSTRACT
Using ovariectomized rats as a model of postmenopausal women, we studied the effects of estrogen (Es) deficiency and in combination with cadmium (Cd) exposure on the calcified hard tissues related to the development of itai-itai disease. Es deficiency suppressed the synthesis of carbonic anhydrase required for the crystal nucleation process, causing the crystal structure defects in the tooth enamel. Regarding the combined effects of Es deficiency and Cd exposure on the bone, in which rats were given drinking water containing Cd ions, soft X-ray radiography revealed a development of labyrinthine pattern in the calvaria, and micro-computed tomography demonstrated the declining trabecular architecture of the tibia, suggesting Cd-induced osteoporotic change. Further, electron microscopy showed the increase of amorphous minerals in the calvaria. In conclusion, the combined effects of Es deficiency and Cd exposure can be responsible for accelerating the declining bone strength together with the crystal structure defects resulting in the preferential occurrence of itai-itai disease in postmenopausal women.(Communicated by Tatsuo SUDA, M.J.A.).
Subject(s)
Cadmium Poisoning/physiopathology , Cadmium/toxicity , Calcification, Physiologic/drug effects , Estrogens/deficiency , Postmenopause/drug effects , Animals , Cadmium Poisoning/metabolism , Cadmium Poisoning/pathology , Dental Enamel/drug effects , Dental Enamel/growth & development , Dental Enamel/metabolism , Disease Models, Animal , Female , Humans , Osteogenesis/drug effects , Rats , Rats, Sprague-DawleySubject(s)
Calcification, Physiologic , Anatomy/history , Apatites , Faculty, Dental , History, 20th Century , JapanABSTRACT
The aim of this study was to evaluate differences in bones quality between newly formed bone and cortical bone formed around titanium alloy implants by using X-ray photoelectron spectroscopy. As a result of narrow scan measurement at 4 weeks, the newly formed bone of C1s, P2p, O1s, and Ca2p were observed at a different peak range and strength compared with a cortical bone. At 8 weeks, the peak range and strength of newly formed bone were similar to those of cortical bone at C1s, P2p, and Ca2p, but not O1s. The results from this analysis indicate that the peaks and quantities of each element of newly formed bone were similar to those of cortical bone at 8 weeks, suggestive of a strong physicochemical resemblance.
ABSTRACT
Monomeric haemoglobin component V (Hb V) from the larva of the midge Propsilocerus akamusi shows high Clâ» affinity under high salt concentrations at acidic pH. In order to understand the structural changes that depend on Clâ» binding, crystal structures of Hb V were determined under acidic high-salt conditions and the structural changes arising from different haem-bound ligands were simulated. Crystal structures of Hb V under acidic high-salt conditions indicated that the side chain of ArgE10 on the distal face of the haem contributes to stabilizing haem-bound Clâ». The conformation of the Arg side chain in the Clâ»-bound form was almost identical to that in ligated Hb V at neutral pH but not to that in met Hb V under acidic salt-free conditions. Furthermore, preliminary molecular-dynamics simulations also indicated that the swinging of the Arg side chain into the haem pocket depends on Clâ» ligation. This result suggests that, like pH change, Clâ» binding affects the location of the distal Arg residue. Owing to the increased positive electrostatic potential observed in the haem pocket at acidic pH, it was concluded that electrostatic changes caused by pH change and anionic ligand binding may affect the behaviour of the polar Arg residue.
Subject(s)
Chironomidae/metabolism , Chlorine/metabolism , Hemoglobins/metabolism , Insect Proteins/metabolism , Larva/metabolism , Animals , Arginine/chemistry , Arginine/metabolism , Chironomidae/chemistry , Crystallography, X-Ray , Heme/chemistry , Heme/metabolism , Hemoglobins/chemistry , Hydrogen-Ion Concentration , Insect Proteins/chemistry , Larva/chemistry , Molecular Dynamics Simulation , Protein BindingABSTRACT
It is well known that exposure to environmental cadmium causes itai-itai (ouch-ouch) disease. However, the exact mechanism underlying this bone disease remains unresolved. By focusing on the calcification mechanism, we examined developing tooth enamel in rats exposed to cadmium to test the hypothesis that cadmium exposure may cause defects in crystal formation. Electron microscopy revealed the presence of perforated crystals in developing tooth enamel, indicating that the process of crystal nucleation may have been interrupted by cadmium exposure. Furthermore, biochemical analyses revealed that the catalytic activity of carbonic anhydrase in the immature enamel matrix declined remarkably despite the fact that quantitative reduction of this enzyme was insignificant, suggesting that the decline of catalytic activity may have resulted from the replacement of zinc with cadmium ions. Therefore, we concluded that the poor catalytic activity of cadmium-binding carbonic anhydrase might hinder the nucleation process, leading to an impairment in mineralization that causes itai-itai disease.
Subject(s)
Cadmium/toxicity , Dental Enamel/embryology , Dental Enamel/pathology , Tooth/embryology , Tooth/pathology , Animals , Carbonic Anhydrases/metabolism , Crystallization , Dental Enamel/enzymology , Dental Enamel/ultrastructure , Dental Enamel Proteins/metabolism , Electrophoresis, Polyacrylamide Gel , Immunoblotting , Male , Rats , Rats, Sprague-Dawley , Tooth/enzymology , Tooth/ultrastructureABSTRACT
The purpose of this study was to morphologically demonstrate the presence of octacalcium phosphate in the dental calculus by judging from the crystal lattice image and its rapid transformation into apatite crystal, as part of our serial studies on biomineral products. We also aimed to confirm whether the physical properties of octacalcium phosphate are identical with those of the central dark lines observed in crystals of ordinary calcifying hard tissues. Electron micrographs showed that crystals of various sizes form in the dental calculus. The formation of each crystal seemed to be closely associated with the organic substance, possibly originating from degenerated microorganisms at the calcification front. Many crystals had an 8.2-A lattice interval, similar to that of an apatite crystal. Furthermore, some crystals clearly revealed an 18.7-A lattice interval and were vulnerable to electron bombardment. After electron beam exposure, this lattice interval was quickly altered to about half (i.e. 8.2 A), indicating structural conversion. Consequently, a number of apatite crystals in the dental calculus are possibly created by a conversion mechanism involving an octacalcium phosphate intermediate. However, we also concluded that the calcification process in the dental calculus is not similar to that of ordinary calcifying hard tissues.
Subject(s)
Calcium Phosphates/chemistry , Dental Calculus/chemistry , Dental Calculus/ultrastructure , Humans , Microscopy, Electron, TransmissionABSTRACT
PURPOSE: It is now well known that implant surface properties affect osseointegration. Grit-blasting with abrasives and coating by plasma are methods to modify implant surfaces. This study aimed to compare the direction of new bone formation associated with three types of surfaces. MATERIALS AND METHODS: Titanium (Ti) alloy rods grit-blasted with alumina abrasive (Group 1, G1), with apatitic abrasive (Group 2, G2), and with apatitic abrasive and plasma-sprayed with hydroxyapatite (Group 3, G3) were implanted in surgically created defects in tibias of New Zealand white rabbits for 2 and 4 weeks. After sacrifice, the implants and surrounding bones were obtained and analyzed using back scattered imaging. RESULTS: Differences in patterns of bone formation among the groups were observed: originating from the cortical bone towards the implant surface (Type A), surrounding the implant (Type B) and originating from the medullary cavity (Type C). G1 and G3 showed Types A and B while G2 exhibited Types A, B and C. After 4 weeks, greater amount of new bone was observed in G2 group compared with those in G1 and G3 groups. CONCLUSIONS: This study demonstrated that patterns of bone formation are influenced by methods of surface modification.
Subject(s)
Dental Implantation, Endosseous/methods , Dental Implants , Osseointegration , Animals , Rabbits , Scattering, Radiation , Surface PropertiesABSTRACT
Thermal effects produced in a laser-irradiated sample were studied by micro-X-ray diffraction and micro-Fourier transform infrared spectroscopy (FTIR). Gypsum, transformed into bassanite at 124 degrees C and into anhydrite at 147 degrees C, was used as a thermal indicator. Pit formation by a wavelength-tunable free electron laser (FEL) irradiation on the gypsum pellet maximized at a wavelength of 3.0 microm, 2 mJ/shot, and pits were not detected in those irradiated at 2.6 or 3.8 microm compared with the maximum at 3.0 microm and diminished at 2.0 or 4.0 microm in the human tooth case. Micro-X-ray diffraction and micro-FTIR did not reveal any appreciable bassanite or anhydrite in the irradiated regions. From the laser ablation viewpoint, these results allow the FEL ablation to be considered as plasma or evaporative ones. This study indicated that the micro-pulse of laser was effective to prevent thermal damages of laser irradiation.
Subject(s)
Calcium Sulfate , Dental Cavity Preparation/instrumentation , Dental Enamel/radiation effects , Lasers , Humans , In Vitro Techniques , Spectroscopy, Fourier Transform Infrared , Temperature , X-Ray DiffractionABSTRACT
The purpose of this study was to investigate the influence of sintering temperature on in vivo and in vitro bioactivities of sintered tricalcium phosphate (TCP) sheets prepared by the tape casting technique. Green sheets of beta-TCP prepared by tape casting were sintered for 2 h in a furnace at atmospheric pressure, at five different sintering temperatures: 900, 1000, 1100, 1150, and 1200 degrees C. Measurement of X-ray diffraction and Fourier transform infrared spectrometry showed the presence of alpha-tricalcium phosphate phase in the TCP sheet sintered at 1200 degrees C, in addition to beta-TCP phase. As compared with the other sintered TCP sheet, the TCP sheet sintered at 1200 degrees C demonstrated a lower dissolution rate in phosphate buffered saline solution at 37 degrees C and pH 7.4 over 24 weeks, and more amount of apatite formation in Hanks' balanced salt solution with pH 7.4 was observed. After 4 weeks' implantation of sintered TCP sheets into tibial diaphyses of rabbits, the bone-sheet contact of the TCP sheet sintered at 1200 degrees C was significantly higher than that of the TCP sheet sintered at 900 degrees C. These results indicate that a flat sintered TCP sheet prepared by tape casting is a promising material for a bone substitute.