Visualizing electroluminescence process in light-emitting electrochemical cells.

Electroluminescence occurs via recombination reactions between electrons and holes, but these processes have not been directly evaluated. Here, we explore the operation dynamics of ionic liquid-based light-emitting electrochemical cells (LECs) with stable electroluminescence by multi-timescale spectroscopic measurements synchronized with the device operation. Bias-modulation spectroscopy, measuring spectral responses to modulated biases, reveals the bias-dependent behavior of p-doped layers varying from growth to saturation and to recession. The operation dynamics of the LEC is directly visualized by time-resolved bias-modulation spectra, revealing the following findings. Electron injection occurs more slowly than hole injection, causing delay of electroluminescence with respect to the p-doping. N-doping proceeds as the well-grown p-doped layer recedes, which occur while the electroluminescence intensity remains constant. With the growth of n-doped layer, hole injection is reduced due to charge balance, leading to hole-accumulation on the anode, after which LEC operation reaches equilibrium. These spectroscopic techniques are widely applicable to explore the dynamics of electroluminescence-devices.

A Versatile and Simple Approach to Generate Light Emission in Semiconductors Mediated by Electric Double Layers.

The light-emitting device is the primary device for current light sources. In principle, conventional light-emitting devices need heterostructures and/or intentional carrier doping to form a p-n junction. This junction formation is, however, very difficult to achieve for most emerging semiconductors, and the fabrication of light-emitting devices is invariably a significant challenge. This study proposes a versatile and simple approach to realize light-emitting devices. This proposed device requires only a semiconducting film with two electrodes that are covered with an electrolyte. This unique structure achieves light emission at a voltage slightly larger than the bandgap energy of materials. This study applies this concept to emerging direct bandgap semiconductors, such as transition metal dichalcogenide monolayers and zinc oxide single crystals. These devices generate obvious light emission and provide sufficient evidence of the formation of a dynamic p-i-n junction or tunneling junction, presenting a versatile technique to develop optoelectronic devices.

High Current Injection into Dynamic p-n Homojunction in Polymer Light-Emitting Electrochemical Cells.

Ions and electrons in blends of polymer-electrolyte can work in ensemble to operate light-emitting electrochemical cells (LECs), in which the unique features of in situ formed p-n homojunctions offer efficient charge injection and transport. However, electrochemical features give rise to significant stability and speed issues due to limited electrochemical stability and low ion mobility, resulting in low brightness and a slow response of LECs. Here, these issues are overcome by the separate control of ionic and electronic charges, using a simple driving pulse superimposed on a small base voltage; ions with slow response are rearranged by a constant base voltage, while a high-voltage pulse, superimposed upon the base, injects electrons/holes which have fast response, with minimal effect on the ions. This scheme successfully injects an extremely high current density of > 2 kA cm-2 with a balanced electron/hole ratio, at a high-speed response time of ≈ 50 ns; both properties demonstrate advantages of LECs in making polymers brighter. An in situ electron spin resonance measurement on the LECs further revealed that this impressive performance is due to the highly doped polymers, whose spin density reached 7 × 1019 spins cm-3 , and an ordered polymer structure in the active layer blend.

Protonation-induced red-coloured circularly polarized luminescence of [5]carbohelicene fused by benzimidazole.

Benzimidazole-fused [5]carbohelicene ([5]HeliBI) was newly synthesized to examine the spectroscopic and chiroptical properties. The reversible protonation and deprotonation processes of [5]HeliBI were successfully investigated using (1)H NMR, absorption and fluorescence spectral measurements. We also confirmed the circularly polarized luminescence of protonated [5]HeliBI (H(+)-[5]HeliBI). This is the first observation of red-coloured CPL of a helicene derivative.

Controllable Electronic Structures and Photoinduced Processes of Bay-Linked Perylenediimide Dimers and a Ferrocene-Linked Triad.

A series of perylene-3,4,9,10-bis(dicarboximide) (PDI) dimers linked through the bay regions was systematically synthesized to examine the electronic structures and photophysical properties in dependence on the distance and orientation between the two PDI units. The spectroscopic and electrochemical measurements suggested that the coupling value of a directly linked PDI dimer (PDI)2 is much larger than those of para- and meta-phenylene-bridged PDI dimers p-(PDI)2 and m-(PDI)2 . The width of Davydov splitting was quantitatively evaluated to compare the coupling values between the two PDI units in these dimers by absorption spectroscopy in frozen 2-methyl-THF. Excimer formation of PDI dimers induced the strong fluorescence quenching and large red-shifts. Femtosecond transient absorption revealed a broad absorption derived from an excimer in the range from about 600 nm to the near-IR region. The rate constants of formation and decay of the excimer are strongly dependent on the coupling values. Time-resolved measurements on ferrocene-linked p-(PDI)2 revealed a competition between the photoinduced processes of electron transfer and excimer formation in PhCN, which is in sharp contrast with the sole electron-transfer process in toluene.

Synthetic Control of the Excited-State Dynamics and Circularly Polarized Luminescence of Fluorescent "Push-Pull" Tetrathia[9]helicenes.

A series of fluorescent "push-pull" tetrathia[9]helicenes based on quinoxaline (acceptor) fused with tetrathia[9]helicene (donor) derivatives was synthesized for control of the excited-state dynamics and circularly polarized luminescence (CPL) properties. In this work, introduction of a quinoxaline onto the tetrathia[9]helicene skeleton induced the "push-pull" character, which was enhanced by further introduction of an electron-releasing Me2 N group or an electron-withdrawing NC group onto the quinoxaline unit (denoted as Me2 N-QTTH and NC-QTTH, respectively). These trends were successfully discussed in terms of by electrochemical measurements and density functional theory (DFT) calculations. As a consequence, significant enhancements in the fluorescence quantum yields (ΦFL ) were achieved. In particular, the maximum ΦFL of Me2 N-QTTH was 0.43 in benzene (NC-QTTH: ΦFL =0.30), which is more than 20 times larger than that of a pristine tetrathia[9]helicene (denoted as TTH; ΦFL =0.02). These enhancements were also explained by kinetic discussion of the excited-state dynamics such as fluorescence and intersystem crossing (ISC) pathways. Such significant enhancements of the ΦFL values thus enabled us to show the excellent CPL properties. The value of anisotropy factor gCPL (normalized difference in emission of right-handed and left-handed circularly polarized light) was estimated to be 3.0 × 10(-3) for NC-QTTH.

Ambipolar light-emitting organic single-crystal transistors with a grating resonator.

Electrically driven organic lasers are among the best lasing devices due to their rich variety of emission colors as well as other advantages, including printability, flexibility, and stretchability. However, electrically driven lasing in organic materials has not yet been demonstrated because of serious luminescent efficiency roll-off under high current density. Recently, we found that the organic ambipolar single-crystal transistor is an excellent candidate for lasing devices because it exhibits less efficient roll-off, high current density, and high luminescent efficiency. Although a single-mode resonator combined with light-emitting transistors (LETs) is necessary for electrically driven lasing devices, the fragility of organic crystals has strictly limited the fabrication of resonators, and LETs with optical cavities have never been fabricated until now. To achieve this goal, we improved the soft ultraviolet-nanoimprint lithography method and demonstrated electroluminescence from a single-crystal LET with a grating resonator, which is a crucial milestone for future organic lasers.

Ultrafast photoinduced electron transfer in face-to-face charge-transfer π-complexes of planar porphyrins and hexaazatriphenylene derivatives.

Charge-transfer (CT) π-complexes are formed between planar porphyrins and 1,4,5,8,9,12-hexaazatriphenylene (HAT) derivatives with large formation constants (e.g., 104 M-1), exhibiting broad CT absorption bands. The unusually large formation constants result from close face-to-face contact between two planar π-planes of porphyrins and HAT derivatives. The redox potentials of porphyrins and HAT derivatives measured by cyclic voltammetry indicate that porphyrins and HAT derivatives act as electron donors and acceptors, respectively. The formation of 1 : 1 CT complexes between porphyrins and HAT derivatives was examined by UV-vis, fluorescence and 1H NMR measurements in nonpolar solvents. The occurrence of unprecedented ultrafast photoinduced electron transfer from the porphyrin unit to the HAT unit in the CT π-complex was observed by femtosecond laser flash photolysis measurements. A highly linear aggregate composed of a planar porphyrin and an HAT derivative was observed by transmission electron microscopy (TEM) and atomic force microscopy (AFM).

Formation of one-dimensional helical columns and excimerlike excited states by racemic quinoxaline-fused [7]carbohelicenes in the crystal.

A series of quinoxaline-fused [7]carbohelicenes (HeQu derivatives) was designed and synthesized to evaluate their structural and photophysical properties in the crystal state. The quinoxaline units were expected to enhance the light-emitting properties and to control the packing structures in the crystal. The electrochemical and spectroscopic properties and excited-state dynamics of these compounds were investigated in detail. The first oxidation potentials of HeQu derivatives are approximately the same as that of unsubstituted reference [7]carbohelicene (Heli), whereas their first reduction potentials are shifted to the positive by about 0.7 V. The steady-state absorption, fluorescence, and circular dichroism spectra also became redshifted compared to those of Heli. The molecular orbitals and energy levels of the HOMO and LUMO states, calculated by DFT methods, support these trends. Moreover, the absolute fluorescence quantum yields of HeQu derivatives are about four times larger than that of Heli. The structural properties of the aggregated states were analyzed by single-crystal analysis. Introduction of appropriate substituents (i.e., 4-methoxyphenyl) in the HeQu unit enabled the construction of one-dimensional helical columns of racemic HeQu derivatives in the crystal state. Helix formation is based on intracolumn π-stacking between two neighboring [7]carbohelicenes and intercolumn CH⋅⋅⋅N interaction between a nitrogen atom of a quinoxaline unit and a hydrogen atom of a helicene unit. The time-resolved fluorescence spectra of single crystals clearly showed an excimerlike delocalized excited state owing to the short distance between neighboring [7]carbohelicene units.

Hall-effect measurements probing the degree of charge-carrier delocalization in solution-processed crystalline molecular semiconductors.

Intramolecular structure and intermolecular packing in crystalline molecular semiconductors should have profound effects on the charge-carrier wave function, but simple drift mobility measurements are not very sensitive to this. Here we show that differences in the Hall resistance of two soluble pentacene derivatives can be explained with different degrees of carrier delocalization being limited by thermal lattice fluctuations. A combination of Hall measurements, optical spectroscopy, and theoretical simulations provides a powerful probe of structure-property relationships at a molecular level.

Band-like temperature dependence of mobility in a solution-processed organic semiconductor.

The mobility mu of solution-processed organic semiconductors has improved markedly to room-temperature values of 1-5 cm(2) V(-1) s(-1). In spite of their growing technological importance, the fundamental open question remains whether charges are localized onto individual molecules or exhibit extended-state band conduction like those in inorganic semiconductors. The high bulk mobility of 100 cm(2) V(-1) s(-1) at 10 K of some molecular single crystals provides clear evidence that extended-state conduction is possible in van-der-Waals-bonded solids at low temperatures. However, the nature of conduction at room temperature with mobilities close to the Ioffe-Regel limit remains controversial. Here we investigate the origin of an apparent 'band-like', negative temperature coefficient of the mobility (dmu/dT<0) in spin-coated films of 6,13-bis(triisopropylsilylethynyl)-pentacene. We use optical spectroscopy of gate-induced charge carriers to show that, at low temperature and small lateral electric field, charges become localized onto individual molecules in shallow trap states, but that a moderate lateral electric field is able to detrap them resulting in highly nonlinear, low-temperature transport. The negative temperature coefficient of the mobility at high fields is not due to extended-state conduction but to localized transport limited by thermal lattice fluctuations.

High yield, single droplet electrode arrays for nanoscale printed electronics.

In this work we demonstrate two building blocks of a scalable manufacturing technology for nanoscale electronic devices based on direct-write printing: an architecture for high-yield printing of electrode gaps with 100 nm dimension and a low-temperature silver complex ink for integration of organic materials with high conductivity metal interconnects. We use single printed droplets that are made to dewet slowly from each other to allow reliable, high yield patterning even in the presence of certain surface defects.