Neutron and X-ray crystallographic analysis of Achromobacter protease I at pD 8.0: protonation states and hydration structure in the free-form.

The structure of the free-form of Achromobacter protease I (API) at pD 8.0 was refined by simultaneous use of single crystal X-ray and neutron diffraction data sets to investigate the protonation states of key catalytic residues of the serine protease. Occupancy refinement of the catalytic triad in the active site of API free-form showed that ca. 30% of the imidazole ring of H57 and ca. 70% of the hydroxyl group of S194 were deuterated. This observation indicates that a major fraction of S194 is protonated in the absence of a substrate. The protonation state of the catalytic triad in API was compared with the bovine ß-trypsin-BPTI complex. The comparison led to the hypothesis that close contact of a substrate with S194 could lower the acidity of its hydroxyl group, thereby allowing H57 to extract the hydrogen from the hydroxyl group of S194. H210, which is a residue specific to API, does not form a hydrogen bond with the catalytic triad residue D113. Instead, H210 forms a hydrogen bond network with S176, H177 and a water molecule. The close proximity of the bulky, hydrophobic residue W169 may protect this hydrogen bond network, and this protection may stabilize the function of API over a wide pH range.

Purification and characterization of a non-S-RNase and S-RNases from styles of Japanese pear (Pyrus pyrifolia).

In this study we biochemically characterized stylar ribonucleases (RNases) of Japanese pear (Pyrus pyrifolia), which exhibits S-RNase-based gametophytic self-incompatibility. We separated the RNase fractions NS-1, NS-2, and NS-3 from stylar extracts of the cultivar Nijisseiki (S(2)S(4)). The RNase in each fraction was purified to homogeneity through a series of chromatographic steps. Chemical analysis of the proteins revealed that the basic RNases in the NS-2 and NS-3 fractions were the S(4)- and S(2)-RNases, respectively. Five additional S-RNases were purified from other cultivars. An acidic RNase in the NS-1 fraction was also purified from other cultivars, and identified as a non-S-allele-associated RNase (non-S-RNase). The non-S-RNase is composed of 203 amino acids, is non-glycosylated and is a N-terminal-pyroglutamylated enzyme of the RNase T(2) family. The substrate specificities and optimum pH levels of the non-S-RNase and S-RNases were similar. Interestingly, the specific activity of the non-S-RNase was 7.5-221-fold higher than those of the S-RNases when tolura yeast RNA was used as the substrate. The specific activity of the S(2)-RNase was 8.8-28.6-fold lower than those of the other S-RNases. These differences in specific activities among the stylar RNases are discussed.

Tautomerism of histidine 64 associated with proton transfer in catalysis of carbonic anhydrase.

The imidazole (15)N signals of histidine 64 (His(64)), involved in the catalytic function of human carbonic anhydrase II (hCAII), were assigned unambiguously. This was accomplished by incorporating the labeled histidine as probes for solution NMR analysis, with (15)N at ring-N(delta1) and N(epsilon2), (13)Cat ring-Cepsilon1, (13)C and (15)N at all carbon and nitrogen, or (15)N at the amide nitrogen and the labeled glycine with (13)C at the carbonyl carbon. Using the pH dependence of ring-(15)N signals and a comparison between experimental and simulated curves, we determined that the tautomeric equilibrium constant (K(T)) of His(64) is 1.0, which differs from that of other histidine residues. This unique value characterizes the imidazole nitrogen atoms of His(64) as both a general acid (a) and base (b): its epsilon2-nitrogen as (a) releases one proton into the bulk, whereas its delta1-nitrogen as (b) extracts another proton from a water molecule within the water bridge coupling to the zinc-bound water inside the cave. This accelerates the generation of zinc-bound hydroxide to react with the carbon dioxide. Releasing the productive bicarbonate ion from the inside separates the water bridge pathway, in which the next water molecules move into beside zinc ion. A new water molecule is supplied from the bulk to near the delta1-nitrogen of His(64). These reconstitute the water bridge. Based on these features, we suggest here a catalytic mechanism for hCAII: the tautomerization of His(64) can mediate the transfers of both protons and water molecules at a neutral pH with high efficiency, requiring no time- or energy-consuming processes.

A second lysine-specific serine protease from Lysobacter sp. strain IB-9374.

A second lysyl endopeptidase gene (lepB) was found immediately upstream of the previously isolated lepA gene encoding a highly active lysyl endopeptidase in Lysobacter genomic DNA. The lepB gene consists of 2,034 nucleotides coding for a protein of 678 amino acids. Amino acid sequence alignment between the lepA and lepB gene products (LepA and LepB) revealed that the LepB precursor protein is composed of a prepeptide (20 amino acids [aa]), a propeptide (184 aa), a mature enzyme (274 aa), and a C-terminal extension peptide (200 aa). The mature enzyme region exhibited 72% sequence identity to its LepA counterpart and conserved all essential amino acids constituting the catalytic triad and the primary determining site for lysine specificity. The lepB gene encoding the propeptide and mature-enzyme portions was overexpressed in Escherichia coli, and the inclusion body produced generated active LepB through appropriate refolding and processing. The purified enzyme, a mature 274-aa lysine-specific endopeptidase, was less active and more sensitive to both temperature and denaturation with urea, guanidine hydrochloride, or sodium dodecyl sulfate than LepA. LepA-based modeling implies that LepB can fold into essentially the same three-dimensional structure as LepA by placing a peptide segment, composed of several inserted amino acids found only in LepB, outside the molecule and that the Tyr169 side chain occupies the site in which the indole ring of Trp169, a built-in modulator for unique peptidase functions of LepA, resides. The results suggest that LepB is an isozyme of LepA and probably has a tertiary structure quite similar to it.

Purification, bacteriolytic activity, and specificity of beta-lytic protease from Lysobacter sp. IB-9374.

Lysobacter sp. IB-9374, which was isolated from soil as a high lysyl endopeptidase-producing strain (Chohnanet al., FEMS Microbiol. Lett., 213, 13-20, 2002), was found to produce a beta-lytic protease capable of lysing gram-positive bacteria such as Staphylococcus aureus, Microccocuseus, and Bacillus subtilis. The Lysobacter strain secreted the beta-lytic protease into the culture medium at a 2.4-fold higher level than Achromobacter lyticus. The enzyme was highly purified through a series of six steps with a high yield. The enzyme was strongly inhibited by tetraethylene-pentamine and 1,10-phenanthroline. The purified enzyme lysed more efficiently almost all the gram-positive bacteria tested than lysozyme, lysostaphin, and mutanolysin. The enzyme was very similar to Achromobacter beta-lytic protease containing one zinc atom in terms of amino acid composition and N-terminal sequence. The nucleotide sequence revealed that the mature enzyme was composed of 179 amino acid residues with additional 198 amino acids at the amino-terminal end of the enzyme. The deduced amino acid sequence of the mature enzyme coincided with that of the Achromobacter enzyme, although the prepro-region showed a 41% sequence identity with the counterpart. These results indicate that Lysobacter sp. is a useful strain for an efficient large-scale preparation of beta-lytic protease capable of lysing bacteria.

Electrostatic role of aromatic ring stacking in the pH-sensitive modulation of a chymotrypsin-type serine protease, Achromobacter protease I.

Achromobacter protease I (API) has a unique region of aromatic ring stacking with Trp169-His210 in close proximity to the catalytic triad. This paper reveals the electrostatic role of aromatic stacking in the shift in optimum pH to the alkaline region, which is the highest pH range (8.5-10) among chymotrypsin-type serine proteases. The pH-activity profile of API showed a sigmoidal distribution that appears at pH 8-10, with a shoulder at pH 6-8. Variants with smaller amino acid residues substituted for Trp169 had lower pH optima on the acidic side by 0-0.9 units. On the other hand, replacement of His210 by Ala or Ser lowered the acidic rim by 1.9 pH units, which is essentially identical to that of chymotrypsin and trypsin. Energy minimization for the mutant structures suggested that the side-chain of Trp169 stacked with His210 was responsible for isolation of the electrostatic interaction between His210 and the catalytic Asp113 from solvent. The aromatic stacking regulates the low activity at neutral pH and the high activity at alkaline pH due to the interference of the hydrogen bonded network in the catalytic triad residues.

Lysobacter strain with high lysyl endopeptidase production.

A new lysyl endopeptidase producing strain, Lysobacter sp. IB-9374, was isolated from soil. This strain secreted the endopeptidase to culture medium at 6-12-fold higher levels relative to Achromobacter lyticus and Lysobacter enzymogenes. The mature Lysobacter sp. enzyme was enzymatically identical to Achromobacter lysyl endopeptidase bearing lysyl bond specificity, a high peptidase activity, a wide pH optimum, and stability against denaturants. Nucleotide sequence analysis of the Lysobacter sp. lysyl endopeptidase gene revealed that the enzyme is synthesized as a precursor protein consisting of signal peptide (20 amino acids (aa)), pro-peptide (185 aa), mature enzyme (268 aa), and C-terminal extension peptide (198 aa). The deduced amino acid sequence of the mature enzyme was totally identical to that of the Achromobacter enzyme. The Lysobacter sp. precursor protein has an 18-aa longer peptide chain following nine consecutive amino acid residues distinct from the Achromobacter counterpart at the C-terminus. Total precursor protein is 671 aa of which only 268 aa are in the finally processed exoenzyme.

Contribution of an imidazole-indole stack to high catalytic potency of a lysine-specific serine protease, Achromobacter protease I.

Achromobacter protease I (API), a lysine-specific serine-protease of the trypsin family, has an aromatic-ring stacking Trp 169-His 210 in close proximity to the reactive site. In order to investigate the role of this novel aromatic stacking, several mutants of the two residues were constructed and their kinetic parameters were determined. Three His 210 mutants showed lower activity by one order of magnitude than the wild-type with a peptide substrate of Ala-Ala-Lys-MCA (4-methylcoumaryl-7-amide), but 30-170% activity towards Val-Leu-Lys-MCA, suggesting that His 210 plays a role in keeping high activity toward various substrates by maintaining the active form of the substrate-binding subsite. Kinetic results of eight Trp 169 variants showed a roughly linear relation between k(cat) or K(m) values and the surface area at residue 169. With increasing size of the side-chain, k(cat) values increased, while K(m) values decreased. A systematic kinetic analysis of the activities of Trp 169 mutants toward Lys-MCA, Ala-Lys-MCA, and Ala-Ala-Lys-MCA peptide substrates revealed that large side-chain, rather than aromaticity, plays an important role in retaining the high catalytic activity of API. Due to the presence of the aromatic stacking, API shows one order of magnitude higher activity than bovine trypsin.

Histidine 210 mutant of a trypsin-type Achromobacter protease I shows broad optimum pH range.

Achromobacter protease I (API), a lysine-specific serine protease, shows one order of magnitude higher activity than bovine trypsin, while its optimum pH is in the alkaline region at about pH 9. To improve the optimum pH range, mutant enzyme His 210 replaced by Ser(H210S), Ala (H210A), and Lys (H210K) were constructed. The optimum pH of H210S shifted from about pH 9 (wild-type enzyme) to about pH 7, retaining its high activity. The putative electrostatic interaction between His 210 and catalytic Asp 113 was elucidated by the optimum-pH shift of H210K and H210A. These results indicate that this unconserved His 210 in API, which plays a key role in generating the useful peptidase, broadened the optimum-pH range without decreasing lysylendo-peptidase activity.