Characterization and Photocatalytic Performance of Potassium-Doped Titanium Oxide Nanostructures Prepared via Wet Corrosion of Titanium Microspheres.

Potassium doped titanium oxide (KTiOx) nanowires were prepared by the wet corrosion process (WCP) and their photocatalytic effects were systematically characterized. For the synthesis of KTiOx, the potassium hydroxide concentration of the WCP was varied in order to obtain nanostructures with different surface area and surface charge. Structural and crystalline properties of KTiOx were studied by means of X-ray diffraction, scanning and transmission electron microscopy. Chemical composition was determined by X-ray fluorescence and energy-dispersive X-ray analysis. Photocatalytic performance was investigated as a function of the surface area, pH, and crystalline structures by studying the degradation of methylene blue, cardiogreen, and azorubine red dyes upon UV irradiation. The negatively charged crystalline KTiOx nanostructures with high surface area showed significantly higher photocatalytic degradation compared to their TiOx counterpart. They also showed high efficiency for recovery and re-use. Annealing KTiOx nanostructures improved structural properties leading to well-ordered layered structures and improved photocatalysis. However, annealing at temperatures higher than 600 °C yielded formation of rutile grains at the surface of nanowires, significantly affecting the photocatalytic performance. We believe that KTiOx nanostructures produced by WCP are very promising for photocatalysis, especially due to their high photocatalytic efficiency as well as their potential for re-use and durability.

Bridging the scales in high-throughput dielectrophoretic (bio-)particle separation in porous media.

Dielectrophoresis (DEP) is a versatile technique for the solution of difficult (bio-)particle separation tasks based on size and material. Particle motion by DEP requires a highly inhomogeneous electric field. Thus, the throughput of classical DEP devices is limited by restrictions on the channel size to achieve large enough gradients. Here, we investigate dielectrophoretic filtration, in which channel size and separation performance are decoupled because particles are trapped at induced field maxima in a porous separation matrix. By simulating microfluidic model porous media, we derive design rules for DEP filters and verify them using model particles (polystyrene) and biological cells (S. cerevisiae, yeast). Further, we bridge the throughput gap by separating yeast in an alumina sponge and show that the design rules are equally applicable in real porous media at high throughput. While maintaining almost 100% efficiency, we process up to 9 mL min-1, several orders of magnitude more than most state-of-the-art DEP applications. Our microfluidic approach provides new insight into trapping dynamics in porous media, which even can be applied in real sponges. These results pave the way toward high-throughput retention, which is capable of solving existing problems such as cell separation in liquid biopsy or precious metal recovery.

Contact Forces between Single Metal Oxide Nanoparticles in Gas-Phase Applications and Processes.

In this work we present a comprehensive experimental study to determine the contact forces between individual metal oxide nanoparticles in the gas-phase using atomic force microscopy. In addition, we determined the amount of physisorbed water for each type of particle surface. By comparing our results with mathematical models of the interaction forces, we could demonstrate that classical continuum models of van der Waals and capillary forces alone cannot sufficiently describe the experimental findings. Rather, the discrete nature of the molecules has to be considered, which leads to ordering at the interface and the occurrence of solvation forces. We demonstrate that inclusion of solvation forces in the model leads to quantitative agreement with experimental data and that tuning of the molecular order by addition of isopropanol vapor allows us to control the interaction forces between the nanoparticles.

Contact mechanics of highly porous oxide nanoparticle agglomerates.

Efficient nanopowder processing requires knowledge of the powder's mechanical properties. Due to the large surface area to volume ratio, nanoparticles experience relatively strong attractive interactions, leading to the formation of micron-size porous structures called agglomerates. Significant effort has been directed towards the development of models and experimental procedures to estimate the elasticity of porous objects such as nanoparticle agglomerates; however, none of the existing models has been validated for solid fractions below 0.1. Here, we measure the elasticity of titania (TiO[Formula: see text], 22 nm), alumina (Al[Formula: see text]O[Formula: see text], 8 nm), and silica (SiO[Formula: see text], 16 nm) nanopowder agglomerates by Atomic Force Microscopy, using a 3.75 [Formula: see text]m glass colloid for the stress-strain experiments. Three sample preparations with varying degree of powder manipulation are assessed. The measured Young's moduli are in the same order of magnitude as those predicted by the model of Kendall et al., thus validating it for the estimation of the Young's modulus of structures with porosity above 90 %.

Contact Forces between TiO2 Nanoparticles Governed by an Interplay of Adsorbed Water Layers and Roughness.

Interparticle forces govern the mechanical behavior of granular matter and direct the hierarchical assembling of nanoparticles into supramolecular structures. Understanding how these forces change under different ambient conditions would directly benefit industrial-scale nanoparticle processing units such as filtering and fluidization. Here we rationalize and quantify the contributions of dispersion, capillary, and solvation forces between hydrophilic TiO2 nanoparticles with sub-10 nm diameter and show that the humidity dependence of the interparticle forces is governed by a delicate interplay between the structure of adsorbed water layers and the surface roughness. All-atom molecular dynamics modeling supported by force-spectroscopy experiments reveals an unexpected decrease in the contact forces at increasing humidity for nearly spherical particles, while the forces between rough particles are insensitive to strong humidity changes. Our results also frame the limits of applicability of discrete solvation and continuum capillary theories in a regime where interparticle forces are dominated by the molecular nature of surface adsorbates.

Transfer of highly porous nanoparticle layers to various substrates through mechanical compression.

A new two-step layer transfer process is introduced that is capable of fabricating mechanically stabilized highly porous nanoparticle layers on various substrates. In a first step titanium dioxide nanoparticles were synthesized with Flame-Spray-Pyrolysis and accumulated on a filter paper in the gas phase. In a second step this highly porous filter cake is subsequently transferred to a final substrate via low pressure lamination at room temperature. This leads to mechanical restructuring and stabilization of the porous layer. Pore size analysis indicates homogenization of the layers through rearrangement of the aggregates inside the layers that increases with applied pressure. Additionally, the Young's moduli of the layers were quantified through Colloidal-Probe-Technique indentation measurements with an Atomic-Force-Microscope. The highest lamination pressure of 2.5 MPa resulted in triplication of the Young's modulus. The results show that our novel two-step layer transfer process leads to mechanically stabilized layers that preserve their high porosity. Through the decoupling of the high temperature nanoparticle synthesis and the final substrate the process also enables the possibility to apply temperature sensitive substrates such as polypropylene foil.