Integrated SOAs enable energy-efficient intra-data center coherent links.

Coherent optical links are becoming increasingly attractive for intra-data center applications as data rates scale. Realizing the era of high-volume short-reach coherent links will require substantial improvements in transceiver cost and power efficiency, necessitating a reassessment of conventional architectures best-suited for longer-reach links and a review of assumptions for shorter-reach implementations. In this work, we analyze the impact of integrated semiconductor optical amplifiers (SOAs) on link performance and power consumption, and describe the optimal design spaces for low-cost and energy-efficient coherent links. Placing SOAs after the modulator provide the most energy-efficient link budget improvement, up to 6 pJ/bit for large link budgets, despite any penalties from nonlinear impairments. Increased robustness to SOA nonlinearities makes QPSK-based coherent links especially attractive, and larger supported link budgets enable the inclusion of optical switches, which could revolutionize data center networks and improve overall energy efficiency.

Scalable multicast hybrid broadband-crossbar wavelength selective switch: proposal and analysis.

In this Letter, we present a new hybrid broadband-crossbar switching network that can switch multiple wavelengths on demand and can also multicast. This switch fabric is an improvement over our previous design in both switch footprint and power consumption, as it reduces the number of switching elements by approximately 50%. We compare the switch loss and crosstalk with that of a multiwavelength selective crossbar switch. We also comment on fabrication tolerance of second-order ring resonators based on experimental results of 64 second-order ring resonators, and more than 250 heaters.

2 λ switch.

We demonstrate an elastic multi-wavelength selective switch with up to two wavelength switching capability per crosspoint. We fabricated the switch in a silicon photonics foundry and demonstrated a 17 nm tuning range for ring resonators, with a mean path loss of 2.43 dB. This is a 70% reduction in path loss as compared to previous generations, and we demonstrate a high-speed pulse-amplitude-modulation-4 transmission at 111 Gbps through different paths of the switch.

Multi-wavelength selective crossbar switch.

Here we demonstrate an 8x4 multi-wavelength selective ring resonator based crossbar switch matrix implemented in a 220-nm silicon photonics foundry for interconnecting electronic packet switches in scalable data centers. This switch design can dynamically assign up to two wavelength channels for any port-port connection, providing almost full connectivity with significant reduction in latency, cost and complexity. The switch unit cell insertion loss was measured at 0.8 dB, with an out-of-band rejection of 32 dB at 400 GHz channel separation. All the ring resonator heaters were thermally tuned, with heaters controlled by a custom 64-channel DAC driver. Detailed measurements on the whole switch showed standard deviation of 2 dB in losses across different paths, standard deviation of 0.33 nm in resonant wavelength and standard deviation of 0.01 nm/mW in ring heater tuning efficiency. Data transmission experiments at 40 Gbps showed negligible penalty due to crosstalk paths through the switch.

On-chip wavelength locking for photonic switches.

We present an on-chip wavelength reference with a partial drop ring resonator and germanium photodetector. This approach can be used in ring-resonator-based wavelength-selective switches where absolute wavelength alignment is required. We use the temperature dependence of heater resistance as a temperature sensor. Additionally, we discuss locking speed, statistical variation of heater resistances, and tuning speed of the switches.