A novel calibration method for portable X-ray fluorescence analysis of printed circuit boards.

Printed circuit boards (PCBs) are the most complex and valuable component of electronic devices, but only 34% of them are recycled in an environmentally sound manner. Improving the recycling rate and efficiency requires a fast, reliable and uncostly analytical method. Although the X-ray fluorescence (XRF) shows high potential, it is often unreliable. In this study, we propose a novel XRF methodology for the elemental analysis of PCBs, using the certified reference material (CRM) to decrease uncertainty and enhance accuracy. The results show significant improvement in robustness and accuracy of portable XRF(pXRF) analyses for elements Cu, Pb, Ni, As and Au, with a relative average inaccuracy of approximately 5% compared to referenced values. The methodology validation carried out by comparing pXRF and inductively coupled plasma mass spectroscopy analyses of personal computer motherboard samples shows no statistically significant difference for elements Cu, Cr and Ag. The study shows that the calibration of pXRF by CRMs enables the necessary analysis of PCBs in an efficient and reliable manner and could be also be applied to different types of PCBs and other electronic components, batteries or contaminated soil samples.

Plastic Recycling Practices in Vietnam and Related Hazards for Health and the Environment.

Waste plastic today is a global threat. The rapid increase in global production and use has led to increasing quantities of plastics in industrial and municipal waste streams. While in industrialized countries plastic waste is taken up by a waste management system and at least partly recycled, in low-income countries adequate infrastructure to collect and treat waste adequately is often not in place. This paper analyzes how plastic waste is handled in Vietnam, a country with a fast-growing industry and growing consumption. The recycling of plastic waste typically takes place in an informal context. To demonstrate this in more detail, two rural settlements-so-called craft villages-are taken as case studies. Technologies and processes for plastic recycling are described and related risks for human health and the environment are shown, as well as the potential for the improvement of this situation.

WEEE Treatment in Developing Countries: Environmental Pollution and Health Consequences-An Overview.

In the last few decades, the rapid technological evolution has led to a growing generation of waste electrical and electronic equipment (WEEE). Not rarely, it has been exported from industrialized to developing countries, where it represents a secondary source of valuable materials such as gold, copper, and silver. The recycling of WEEE is often carried out without any environmental and health protection. This paper reviews recent literature dealing with the informal treatment of WEEE in developing regions, gathering and analyzing data on concentration of both inorganic and organic pollutants in the environment. Open burning practices are revealed as most polluting 'technology', followed by mechanical treatment and leaching. Significant levels of pollutants have been detected in human bodies, both children and adults, working in or living in areas with informal WEEE treatment.

A relative risk assessment of the open burning of WEEE.

Waste electric and electronic equipment (WEEE) represents a potential secondary source of valuable materials, whose recovery is a growing business activity worldwide. In low-income countries, recycling is carried out under poorly controlled conditions resulting in severe environmental pollution. High concentrations of both metallic and organic pollutants have been confirmed in air, soil, water, and sediments in countries with informal recycling areas. The release of these contaminants into the environment presents a risk to the health of the exposed population that has been widely acknowledged but still needs to be quantified. The aim of this work was to evaluate the relative risk from inhalation associated with the open burning of different kinds of WEEE. The shrinking core model was applied to estimate the concentration of the metals which would be released into the environment during the incineration of different types of WEEE. In addition, the potential generation of dioxins during the same informal practice was estimated, based on the plastic content of the WEEE. The results provided for the first time a comparative analysis of the risk posed from the open burning of WEEE components, proposing a methodology to address the absolute risk assessment to workers from the informal recycling of WEEE.

A device-specific prioritization strategy based on the potential for harm to human health in informal WEEE recycling.

In developing countries, the recovery of valuable materials from Waste Electrical and Electronic Equipment (WEEE) is carried out via uncontrolled practices, posing potentially severe risks both to human health and the environment. The assessment of the risk, which depends on both the kind and hazardous properties of the substances contained in WEEE, is currently limited as the exposure scenario for the single informal practice cannot be fully characterized for this purpose. In this context, this work proposes and evaluates a strategy to identify the relative potential harm of different kinds of WEEE by their content in metals, selected as the target substances of concern. This was based on the individual metal content, primarily located in the printed circuit boards (PCBs) of the different devices. The metal composition of the individual PCBs was identified and the dominant unregulated metal recovery practices were reviewed to identify the most suitable parameter to express the toxicity of these metals. Based on a mass-normalized cumulative toxicity, via the inhalation route, individual components were assessed from compositional variation found in the literature. The results is a semiquantitative ranking of individual components, revealing significant differences in potential harm posed by different electronic appliances and an opportunity to provide prioritization strategies in future management.

Municipal solid waste recycling and the significance of informal sector in urban China.

The informal sector is active in the collection, processing and trading of recyclable materials in urban China. Formal waste management organisations have established pilot schemes for source separation of recyclables, but this strategy is still in its infancy. The amounts of recyclables informally picked out of the municipal solid waste stream are unknown as informal waste workers do not record their activities. This article estimates the size and significance of the current informal recycling system with a focus on the collection of recyclables. A majority of the reviewed literature detects that official data is displaying mainly 'municipal solid waste collected and transported', whereas less information is available on 'real' waste generation rates at the source. Based on a literature review the variables, the 'number of informal waste workers involved in collection activities', the 'amounts collected daily per informal collector' and the 'number of working days' are used to estimate yearly recyclable amounts that are informally diverted from municipal solid waste. The results show an interval of approximately 0.56%-0.93% of the urban population or 3.3-5.6 million people involved in informal waste collection and recycling activities in urban China. This is the equivalent to estimated informal recycling rates of approximately 17-38 w/w% of the municipal solid waste generated. Despite some uncertainties in these assessments, it can be concluded that a significant share of recyclables is collected and processed by informal waste workers.

Assessment of removal of components containing hazardous substances from small WEEE in Austria.

Minimum treatment requirements for waste electrical and electronic equipment (WEEE) established by Directive 2002/96/EC provide for the removal of specific components containing hazardous substances. To date, no comparative analysis of removal rates has been undertaken. The present paper examines the state of de-pollution of sWEEE in Austrian treatment plants. The mass of selected components removed and the corresponding mass of hazardous substances is compared to estimated values for sWEEE input material. The results obtained reveal that components are only partly removed, featuring a high variation between components and plants assessed. The overall rate of removal ranged from 72% of the estimated value for batteries to 21% of the estimated value for liquid crystal panels. This implies the forwarding of substantial quantities of hazardous substances to mechanical treatment processes, particularly relevant in terms of dispersion of pollutants. Furthermore, easily releasable pollutants, such as Hg from LCD-backlights, Cd from batteries or highly contaminated dust in general, pose substantial health risks for plant workers. Low removal rates of printed circuit boards, batteries and toner cartridges also lead to a reduction in quantities of valuable recyclable materials (precious metals, plastics).

Modelling municipal solid waste generation: a review.

The objective of this paper is to review previously published models of municipal solid waste generation and to propose an implementation guideline which will provide a compromise between information gain and cost-efficient model development. The 45 modelling approaches identified in a systematic literature review aim at explaining or estimating the present or future waste generation using economic, socio-demographic or management-orientated data. A classification was developed in order to categorise these highly heterogeneous models according to the following criteria--the regional scale, the modelled waste streams, the hypothesised independent variables and the modelling method. A procedural practice guideline was derived from a discussion of the underlying models in order to propose beneficial design options concerning regional sampling (i.e., number and size of observed areas), waste stream definition and investigation, selection of independent variables and model validation procedures. The practical application of the findings was demonstrated with two case studies performed on different regional scales, i.e., on a household and on a city level. The findings of this review are finally summarised in the form of a relevance tree for methodology selection.

Potentials for the prevention of municipal solid waste.

Waste prevention has been assigned the highest priority under European waste management law. However, the initiatives which have been taken so far have not reduced the regular annual increase in total waste arising across Europe. The purpose of this paper is to quantify and analyze in depth the prevention potential for selected case studies (advertising material, beverage packaging, diapers, food waste, waste from events). Only such measures are considered, which do not require a reduction of consumption. The prevention potentials for household waste in theory are exemplified for the city of Vienna, also with a view to barriers that may reduce the achievable prevention potential. The results show that the prevention potentials for the analyzed individual measures can reach an order of magnitude of some 10% of the relevant waste stream (e.g., advertising material, beverage packaging), or rather 1-3% of municipal solid waste. The prevention potentials appear to be relatively small in relation to the total municipal waste quantities. Methodological shortcomings, such as the missing availability of basic data, make it difficult to exactly estimate the impact of waste prevention measures on waste quantities, which is only one of the effects of waste prevention among other ecological, social and economic aspects.

The ecological relevance of transport in waste disposal systems in Western Europe.

With the development of modern waste management systems in Western Europe, a remarkable increase in the distances for waste transportation has been observed. The question thus arises whether recycling with longer transport distances is ecologically advantageous or whether disposal without recycling is to be preferred. This situation was analysed using selected product and waste streams. This included refrigerators, paper, polyethylene films and expanded polystyrene. For each of these streams, a life cycle analysis was conducted with an emphasis on waste transport. The system boundaries were set in terms of the generation of waste to recycling or landfilling. The comparison included several scenarios with recycling and different transport distances. Landfilling was used as the reference scenario. The results obtained demonstrated how transport distances influence the ecological benefit of recycling. In the case of expanded polystyrene, the ecological boundaries are reached in practical situations, while with other materials these boundaries are far from being attained. In these cases, more complex and elaborate collection schemes, such as kerbside collection, which is economically convenient and shows the highest collection rates, can also be recommended.

Landfill modelling in LCA - a contribution based on empirical data.

Landfills at various stages of development, depending on their age and location, can be found throughout Europe. The type of facilities goes from uncontrolled dumpsites to highly engineered facilities with leachate and gas management. In addition, some landfills are designed to receive untreated waste, while others can receive incineration residues (MSWI) or residues after mechanical biological treatment (MBT). Dimension, type and duration of the emissions from landfills depend on the quality of the disposed waste, the technical design, and the location of the landfill. Environmental impacts are produced by the leachate (heavy metals, organic loading), emissions into the air (CH(4), hydrocarbons, halogenated hydrocarbons) and from the energy or fuel requirements for the operation of the landfill (SO(2) and NO(x) from the production of electricity from fossil fuels). To include landfilling in an life-cycle assessment (LCA) approach entails several methodological questions (multi-input process, site-specific influence, time dependency). Additionally, no experiences are available with regard to mid-term behaviour (decades) for the relatively new types of landfill (MBT landfill, landfill for residues from MSWI). The present paper focuses on two main issues concerning modelling of landfills in LCA: Firstly, it is an acknowledged fact that emissions from landfills may prevail for a very long time, often thousands of years or longer. The choice of time frame in the LCA of landfilling may therefore clearly affect the results. Secondly, the reliability of results obtained through a life-cycle assessment depends on the availability and quality of Life Cycle Inventory (LCI) data. Therefore the choice of the general approach, using multi-input inventory tool versus empirical results, may also influence the results. In this paper the different approaches concerning time horizon and LCI will be introduced and discussed. In the application of empirical results, the presence of data gaps may limit the inclusion of several impact categories and therefore affect the results obtained by the study. For this reason, every effort has been made to provide high-quality empirical LCI data for landfills in Central Europe.

Importance of public relations in recycling strategies: principles and case studies.

The separate collection of waste, and especially of recyclables with specific collection systems, would not be possible without the involvement of the users. Apart from the physical installations such as collection containers, collection points, etc., the motivation of the users is an essential component. Motivation can be reinforced through public relations work. In addition to the underlying technical considerations, this paper describes the difference between communication in general and public relations and specifically examines public involvement in recycling. Through the use of examples, we look at the targeted users and typical media employed. Furthermore, we analyzes the development of public involvement. The examples show that public relations for recycling strategies relies to a great extent on attitudes, habits, and access to the target group. Thus, standardized procedures cannot be developed. For these reasons, public relation activities must be planned carefully and professionally and include an analysis of the target group, choice of media, and verification of success.