Controlled implant/soft tissue interaction by nanoscale surface modifications of 3D porous titanium implants.

Porous titanium implants are widely employed in the orthopaedics field to ensure good bone fixation. Recently, the use of porous titanium implants has also been investigated in artificial larynx development in a clinical setting. Such uses necessitate a better understanding of the interaction of soft tissues with porous titanium structures. Moreover, surface treatments of titanium have been generally evaluated in planar structures, while the porous titanium implants have complex 3 dimensional (3D) architectures. In this study, the determining factors for soft tissue integration of 3D porous titanium implants were investigated as a function of surface treatments via quantification of the interaction of serum proteins and cells with single titanium microbeads (300-500 µm in diameter). Samples were either acid etched or nanostructured by anodization. When the samples are used in 3D configuration (porous titanium discs of 2 mm thickness) in vivo (in subcutis of rats for 2 weeks), a better integration was observed for both anodized and acid etched samples compared to the non-treated implants. If the implants were also pre-treated with rat serum before implantation, the integration was further facilitated. In order to understand the underlying reasons for this effect, human fibroblast cell culture tests under several conditions (directly on beads, beads in suspension, beads encapsulated in gelatin hydrogels) were conducted to mimic the different interactions of cells with Ti implants in vivo. Physical characterization showed that surface treatments increased hydrophilicity, protein adsorption and roughness. Surface treatments also resulted in improved adsorption of serum albumin which in turn facilitated the adsorption of other proteins such as apolipoprotein as quantified by protein sequencing. The cellular response to the beads showed considerable difference with respect to the cell culture configuration. When the titanium microbeads were entrapped in cell-laden gelatin hydrogels, significantly more cells migrated towards the acid etched beads. In conclusion, the nanoscale surface treatment of 3D porous titanium structures can modulate in vivo integration by the accumulative effect of the surface treatment on several physical factors such as protein adsorption, surface hydrophilicity and surface roughness. The improved protein adsorption capacity of the treated implants can be further exploited by a pre-treatment with autologous serum to render the implant surface more bioactive. Titanium microbeads are a good model system to observe these effects in a 3D microenvironment and provide a better representation of cellular responses in 3D.

Comparative bone tissue integration of nanostructured and microroughened dental implants.

AIM: The aim was to compare osteointegration of nanostructured implants to a microsurface widely used for titanium dental implants. MATERIALS & METHODS: Commercial titanium dental implants with smooth or microroughened surfaces were nanostructured. Implants were inserted into the femoral condyles of rabbits. After 2 and 4 weeks, histomorphometry calculation was performed. RESULTS: Nanotubes measuring 60 nm in diameter were observed on both S-NANO (roughness: 0.05 µm) and R-NANO (roughness: 0.40 µm) surfaces. The MICRO surface exhibited typical random cavities (roughness: 2.09 µm). At 4 weeks, bone-to-implant contact values were significantly higher for the R-NANO than for the MICRO surface while no differences were observed at 2 weeks. CONCLUSION: Overall, this study shows that the nanostructured surfaces improved osteointegration similar or higher than the MICRO.

Enhanced osseointegration of titanium implants with nanostructured surfaces: an experimental study in rabbits.

Titanium and its alloys are commonly used for dental implants because of their good mechanical properties and biocompatibility. The surface properties of titanium implants are key factors for rapid and stable bone tissue integration. Micro-rough surfaces are commonly prepared by grit-blasting and acid-etching. However, proteins and cells interact with implant surfaces in the nanometer range. The aim of this study was to compare the osseointegration of machined (MA), standard alumina grit-blasted and acid-etched (MICRO) and nanostructured (NANO) implants in rabbit femurs. The MICRO surface exhibited typical random cavities with an average roughness of 1.5 µm, while the NANO surface consisted of a regular array of titanium oxide nanotubes 37±11 nm in diameter and 160 nm thick. The MA and NANO surfaces had a similar average roughness of 0.5 µm. The three groups of implants were inserted into the femoral condyles of New Zealand White rabbits. After 4 weeks, the pull-out test gave higher values for the NANO than for the other groups. Histology corroborated a direct apposition of bone tissue on to the NANO surface. Both the bone-to-implant contact and bone growth values were higher for the NANO than for the other implant surfaces. Overall, this study shows that the nanostructured surface improved the osseointegration of titanium implants and may be an alternative to conventional grit-blasted and acid-etched surface treatments.

Surface hydride on titanium by cathodic polarization promotes human gingival fibroblast growth.

Connective tissue seal to dental abutment is crucial for peri-implant health. Several efforts have been made previously to optimize abutment surfaces, but no consensus has been reached regarding the optimal surface architecture and/or composition for soft tissue seal. Here, we report on experiments using cathodic polarization in organic acids to optimize titanium (Ti) surfaces for use as abutments. The three main factors affecting surface topography and chemistry were electrolyte composition, current density, and polarization time. Under identical conditions, oxalic acid created rougher surfaces than tartaric acid and acetic acid, and acetic acid produced more surface hydride. Surface hydride amount was suggested to first increase and then decrease with current density from 1 mA/cm(2) to 15 mA/cm(2) . The complexity of the surface topography and hydride production both increased with polarization time. Proliferation rate of human gingival fibroblasts (HGFs) was positively correlated with surface hydride content, suggesting the positive effect of surface hydride on connective tissue growth around dental abutment. Changes in surface topography and hydrophilicity did not significantly influence HGF growth.