ABSTRACT
Batch adsorption study was utilized in evaluating the potential suitability of chitosan-coated bentonite (CCB) as an adsorbent in the removal of indium ions from aqueous solution. The percentage (%) removal and adsorption capacity of indium(III) were examined as a function of solution pH, initial concentration, adsorbent dosage and temperature. The experimental data were fitted with several isotherm models, where the equilibrium data was best described by Langmuir isotherm. The mean energy (E) value was found in the range of 1-8kJ/mol, indicating that the governing type of adsorption of indium(III) onto CCB is essentially physical. Thermodynamic parameters, including Gibbs free energy, enthalpy, and entropy indicated that the indium(III) ions adsorption onto CCB was feasible, spontaneous and endothermic in the temperature range of 278-318K. The kinetics was evaluated utilizing the pseudo-first order and pseudo-second order model. The adsorption kinetics of indium(III) best fits the pseudo-second order (R(2)>0.99), which implies that chemical sorption as the rate-limiting step.
Subject(s)
Bentonite/chemistry , Chitosan/chemistry , Indium/isolation & purification , Nitrates/isolation & purification , Water Pollutants, Chemical/isolation & purification , Water/chemistry , Adsorption , Cations , Hydrogen-Ion Concentration , Indium/analysis , Models, Theoretical , Nitrates/analysis , Particle Size , Solutions , Surface Properties , Temperature , Wastewater/chemistry , Water Pollutants, Chemical/analysis , Water Purification/methodsABSTRACT
In general, plastics are exposed to different degrading agents in every procedure involved in their recovery from waste mixture and from subsequent recycling. In this study, two methods of pre-flotation conditioning were used to determine how these methods affect the general properties of the pre-conditioned PET particles to be recovered from the PET-PVC mixture. The first method comprised the conditioning of PET samples using an alkaline solution of nonionic surfactant (Triton X-100) based on the patent by the Goodyear Tire and Rubber Company. The second method, developed in this study, was a conditioning process which used an alkali-less solution of the same nonionic surfactant (Triton X-100) used in the first method. The following analytical methods were used to characterize properties of the pre-conditioned PET samples that were correlated to relative degradation of the samples: differential scanning calorimetry (DSC), for thermal behavior of the samples; FT-IR spectroscopy, for functional groups present in the samples; and, Pohl's method, for carboxyl end-group concentration count. Results show that in addition to water the presence of NaOH in the conditioning solution contributes to the further degradation of the polymer.
