Evaluation of the effectiveness of red mud-supported catalysts in combination with ozone and TiO2 in the treatment of solution containing benzene, toluene, and xylene.

Ozone and a Fe2+/TiO2-based catalyst were examined in the degradation of a synthetic solution of benzene toluene and xylene (BTX) in an advanced oxidation process (AOP). The catalyst beads were made from the slurry waste of aluminum production process, by inserting the TiO2 content and subsequent calcination. The reduction of the BTX concentration load was monitored by the reduction of chemical oxygen demand (COD) and BTX concentration. Different levels were used on factors: pH, time of treatment, initial concentration of BTX, and percentage of TiO2. The process was conducted in a bubble column reactor with the insertion of catalyst beads. A response surface methodology technique (CCD) was used to build a model based on COD reduction results. The model was optimized using the normal-boundary intersection (NBI) algorithm to maximize COD reduction and minimize the variance attributed to the process. Optimization led to COD reductions of 80% in 2 h of experiment. Correlation analysis of coefficient models from experimental data R2adj was 0.9966, showing a good fit of model data. In the optimized conditions, the possible increase of the biodegradability ratio of the BTX solution, through the biochemical oxygen demand (BOD) and COD, was also analyzed. Under pre-treatment conditions, the BOD/COD ratio was 0.13. After the treatment, it increased to 0.56. Graphical abstract ᅟ.

Normal boundary intersection applied as multivariate and multiobjective optimization in the treatment of amoxicillin synthetic solution.

Amoxicillin is a useful antibiotic to combat bacterial infections. However, this drug can cause serious problems when discarded in waterways due to its great bioaccumulation potential. This compound can be treated via advanced oxidation processes (AOPs), which are capable of converting amoxicillin into carbon dioxide and water. In this context, the use of ozone as an oxidizer has excelled in amoxicillin degradation. This paper aims at treating a synthetic solution of amoxicillin (0.1 g L-1) in a reactor with ozone bubbling. A Design of Experiment (DoE) with a response surface known as Central Composite Design (CCD) was used to optimize the treatment process. In addition, a Normal Boundary Intersection (NBI) method was used in the construction of a Pareto boundary chart. Results after 1-h treatment showed a reduction of 53% of the initial organic matter from a designed model using factors, such as pH, ozone generator power, and O3 flow. A model was built from the CCD with score of 0.9929. Thus, the model was able to represent the real scenario with confidence.