Quantifying environmental emissions of microplastics from urban rivers in Melbourne, Australia.

This study aims to understand the amount and type of microplastics flowing into Port Phillip Bay from urban rivers around Melbourne. Water samples were collected from the Patterson, Werribee, Maribyrnong, and Yarra Rivers, which contribute 97 % to the total flow into Port Phillip Bay. On average, the rivers contained a mean of 9 ± 15 microplastics/L and ranged from 4 ± 3 microplastics/L (Patterson) to 22 ± 11 microplastics/L (Werribee). Of the eight polymers investigated, polyamide and polypropylene were the most frequently detected polymers. Using the mean concentration of each river, the flow of microplastics into Port Philip Bay was estimated to be 7.5 × 106 microplastics per day and 3.7 × 1010 microplastics per year. To fully understand the fate and transport of microplastics into Port Phillip Bay, this study would be the foundation for a more in-depth investigation. Here, further samples will be collected at more points along the river and at the midpoint of each season.

High-resolution temporal wastewater treatment plant investigation to understand influent mass flux of per- and polyfluoroalkyl substances (PFAS).

This study aims to identify sources of per- and polyfluoroalkyl substances (PFAS) to wastewater treatment plants (WWTPs) and reveals previously undescribed variability in daily PFAS concentrations by measuring their occurrence in WWTP influent each hour over the course of a week. ∑50PFAS concentrations ranged between 89 ± 38 on Monday and 173 ± 110 ng L-1 on Friday, where perfluoroalkyl carboxylic acids (PFCAs), disubstituted phosphate esters (diPAPs), and perfluoroalkyl sulfonic acids (PFSAs) contributed the largest proportion to overall weekly concentrations 37%, 30%, and 17% respectively. Simultaneous pulse events of perfluorooctanesulfonic acid (PFOS; 400 ng L-1) and perfluoroheptanesulfonic acid (PFHpS; 18 ng L-1) indicate significant industrial or commercial waste discharge that persists for up to 3 h. The minimum number of hourly grab samples required to detect variation of PFOS and PFHpS concentrations are 7 and 9 samples respectively, indicating a high degree of variability in PFAS concentrations between days. Overall, the risk of sampling bias from grab samples is high given the variability in PFAS concentrations and more frequent sampling campaigns must be balanced against the cost of analysis carefully to avoid the mischaracterisation of mass flux to receiving surface waters.

Assessing exposure of the Australian population to microplastics through bottled water consumption.

The presence of microplastics in the environment is substantially documented; however, the pathways of dietary exposure to microplastics are not yet well understood. This is the first study to document the presence of microplastics in bottled water sold in Australia from commercial outlets. In total, 16 brands of bottled water (Australian Sourced: n = 11, Imported: n = 5) sold in the two largest supermarkets in Australia were analysed in triplicate (n = 48) for the presence of polyethylene, PE; polystyrene, PS; polypropylene, PP; polyvinyl chloride, PVC; polyethylene terephthalate, PET; polycarbonate, PC; polymethylmethacrylate, PMMA; and polyamide, PA. Microplastics were detected in 94% (n = 15) of the samples, with PP (n = 14, 88%), PET (n = 10, 63%), PA (n = 7, 44%), and PE (n = 6, 38%) the most frequently detected. On average, a litre of bottled water contained 13 ± 19 (St Dev) microplastics, ranging from 0 to 80 microplastics/L. The average size of the microplastics identified in this study was 77 ± 22 µm. It was found that bottled water sourced and packaged overseas contained four times as many microplastics compared to bottled water sourced in Australia. It was estimated that in 2017, 28.3% of the Australian population consumed on average 30.8 L of bottled water; therefore, using the result from this study it is estimated that Australians are exposed to 400 microplastics annually through the consumption of bottled water. To understand the total amount of microplastics that Australians could be exposed to through dietary routes, further work is required to observe the presence of microplastics in other beverages and food.

Microplastic contamination of an unconfined groundwater aquifer in Victoria, Australia.

This is the first study to show microplastics contamination in an alluvial sedimentary aquifer that has been capped from the atmosphere. Microplastics are often reported in biotic and abiotic environments, but little is known about their occurrence in groundwater systems. In this study, eight of the most commonly found microplastics in the environment (polyethylene, PE; polystyrene, PS; polypropylene, PP; polyvinyl chloride, PVC; polyethylene terephthalate, PET; polycarbonate, PC; polymethylmethacrylate, PMMA; and polyamide, PA) were analysed in triplicate groundwater samples (n = 21) from five sampling sites across seven capped groundwater monitoring bores from Bacchus Marsh (Victoria, Australia) using Agilent's novel Laser Direct Infra-Red (LDIR) imaging system. Microplastics were detected in all samples, with PE, PP, PS and PVC detected in all seven bores. The average size of the microplastics identified was 89 ± 55 µm (St.Dev.), ranging from 18 to 491 µm. The average number of microplastics detected across all sites was 38 ± 8 microplastics/L, ranging from 16 to 97 particles/L. PE and PVC in total contributed to 59% of the total sum of microplastics detected. PE was consistently detected in all seven bores (average: 11 particles/L), while PVC was more pronounced in a bore adjacent to a meat processor (52 particles/L) compared to that of its overall average of 12 particles/L. A statistically significant positive correlation was observed between PVC and PS (R = 0.934, p ≤0.001). As this study collected samples from capped groundwater bores, the most probable avenue for microplastics was permeation through soil. Therefore, to further understand the fate and transport of microplastics within a groundwater system, it is necessary to analyse a greater range of groundwater bores not only from Australia but throughout the world.