Evaluation of mixing performance and validation of CFD simulations in baffled anaerobic digesters using radiotracer technique.

The anaerobic digesters find usage in treating the huge amount of waste such as trash, garbage, human waste and animal waste. The sustained performance of an anaerobic digester depends on the flow pattern and mixing behaviour in the digester. A cylindrical digester tank with vertical baffles can provide flow behaviour approaching that of a plug flow reactor. However, the presence of dead zones and recirculating regions cause non-ideal flow in the digester. In this work, the mixing behaviour in two scaled-down models of baffled digester tanks is characterized by measurement of residence time distribution (RTD) using a radioactive tracer. While the first design has three vertical baffles, the second design include horizontal static flaps on the baffles. The flow behaviour in the digester is also simulated using computational fluid dynamics (CFD) and RTD is obtained computationally. The comparison of RTD curves obtained from CFD simulations with those obtained from radiotracer experiments show good agreement between them. There appear to be only minor difference in the flow behaviour and the RTD curves in the two digester designs. Using the RTD curve data, two commonly used RTD models, tank-in-series and dispersion models, have been fitted and both models are able to predict the RTD in the digester qualitatively.

Investigation of flow dynamics of wastewater in a pilot-scale constructed wetland using radiotracer technique.

Constructed wetlands (CWs) are used for the treatment of wastewater by natural processes. Knowledge of the flow dynamics of wastewater through the CWs is required to evaluate their performance, operation and design. The residence time distribution (RTD) approach was used to evaluate the above-mentioned parameters in a CW. The RTD of wastewater flowing through a pilot-scale CW was measured using Technetium-99 m (99mTc) as a radiotracer. The measured data were analyzed, and mean residence time and stagnant volumes were quantified under different operating conditions. A plug flow component in series along with a tank-in-series model with an exchange between the active and dead zones was used to simulate the measured RTD curves and investigate the flow dynamics of the flowing wastewater. The results of the study showed that the optimum flow rate and wastewater level in the CW was 2.3 m3/s and 0.6 m, respectively. Moreover, the results of the study will help in the operation and design of the existing wetland and design of new wetlands.

Application of thin layer activation technique for monitoring corrosion of carbon steel in hydrocarbon processing environment.

Acidic crude oil transportation and processing in petroleum refining and petrochemical operations cause corrosion in the pipelines and associated components. Corrosion monitoring is invariably required to test and prove operational reliability. Thin Layer Activation (TLA) technique is a nuclear technique used for measurement of corrosion and erosion of materials. The technique involves irradiation of material with high energy ion beam from an accelerator and measurement of loss of radioactivity after the material is subjected to corrosive environment. In the present study, TLA technique has been used to monitor corrosion of carbon steel (CS) in crude oil environment at high temperature. Different CS coupons were irradiated with a 13 MeV proton beam to produce Cobalt-56 radioisotope on the surface of the coupons. The corrosion studies were carried out by subjecting the irradiated coupons to a corrosive environment, i.e, uninhibited straight run gas oil (SRGO) containing known amount of naphthenic acid (NA) at high temperature. The effects of different parameters, such as, concentration of NA, temperature and fluid velocity (rpm) on corrosion behaviour of CS were studied.

Discharge rate measurements in a canal using radiotracer methods.

Discharge rates of water were measured in a canal using radiotracer methods with an objective to validate the efficacy of Concrete Volute Pumps (CVPs) installed at various pumping stations along the canal. Pulse velocity and dilution methods were applied to measure the discharge rates using Iodine-131 as a radiotracer. The discharge rate measured in one of the sections of the canal using the pulse velocity method was found to be 22.5m(3)/s, whereas the discharge rates measured using the dilution method in four different sections of the canal varied from 20.27 to 20.62m(3)/s with single CVP in operation. The standard error in discharge rate measurements using dilution method ranged from ±1.1 to ±1.8%. The experimentally measured values of the discharge rate were in good agreement with the design value of the discharge rate (20m(3)/s) thus validating the performance of the CVPs used in the canal.

Synthesis, characterization and application of Au-198 nanoparticles as radiotracer for industrial applications.

This paper describes synthesis and characterization of radioactive gold nanoparticles ((198)Au-NPs), and explores their utility as a radiotracer for tracing an aqueous phase in a continuous laboratory-scale bubble column at ambient conditions. The performance of the (198)Au-NPs as a radiotracer was compared with the results obtained with a conventional radiotracer i.e. bromine-82 ((82)Br) as ammonium bromide and found to be identical. A tank-in-series with backmixing model (TISBM) was used to simulate the RTDs of the aqueous phase and characterize flow in the bubble column.

Residence time distribution measurements in a pilot-scale poison tank using radiotracer technique.

Various types of systems are used to control the reactivity and shutting down of a nuclear reactor during emergency and routine shutdown operations. Injection of boron solution (borated water) into the core of a reactor is one of the commonly used methods during emergency operation. A pilot-scale poison tank was designed and fabricated to simulate injection of boron poison into the core of a reactor along with coolant water. In order to design a full-scale poison tank, it was desired to characterize flow of liquid from the tank. Residence time distribution (RTD) measurement and analysis was adopted to characterize the flow dynamics. Radiotracer technique was applied to measure RTD of aqueous phase in the tank using Bromine-82 as a radiotracer. RTD measurements were carried out with two different modes of operation of the tank and at different flow rates. In Mode-1, the radiotracer was instantaneously injected at the inlet and monitored at the outlet, whereas in Mode-2, the tank was filled with radiotracer and its concentration was measured at the outlet. From the measured RTD curves, mean residence times (MRTs), dead volume and fraction of liquid pumped in with time were determined. The treated RTD curves were modeled using suitable mathematical models. An axial dispersion model with high degree of backmixing was found suitable to describe flow when operated in Mode-1, whereas a tanks-in-series model with backmixing was found suitable to describe flow of the poison in the tank when operated in Mode-2. The results were utilized to scale-up and design a full-scale poison tank for a nuclear reactor.