ABSTRACT
Low power optical phase tracking is an enabling capability for intersatellite laser interferometry, as minimum trackable power places significant constraints on mission design. Through the combination of laser stabilization and control-loop parameter optimization, we have demonstrated continuous tracking of a subfemtowatt optical field with a mean time between slips of more than 1000 s. Comparison with analytical models and numerical simulations verified that the observed experimental performance was limited by photon shot noise and unsuppressed laser frequency fluctuations. Furthermore, with two stabilized lasers, we have demonstrated 100 min of continuous phase tracking of Gravity Recovery and Climate Experiment (GRACE)-like signal dynamics with an optical carrier ranging in power between 1-7 fW with zero cycle slips. These results indicate the feasibility of future interspacecraft laser links operating with significantly reduced received optical power.
ABSTRACT
We demonstrate digitally enhanced interferometry with better than 100 dB mean cross-talk suppression with Golay complementary pairs using a combination of numerical simulations and experiments. These results exceed previously reported cross-talk suppression using conventional maximal length sequences by more than 48 dB.
Subject(s)
Cell Physiological Phenomena , InterferometryABSTRACT
This paper presents an analytical model and experimental validation for the detection performance and false-alarm rates for phase-encoded random modulation continuous-wave (RMCW) LiDAR. Derivation of the model focuses on propagating the effects of relevant noise sources through the system to determine an analytical expression for the detection rate, expressed by the probability of detection. The model demonstrates that probability of detection depends only on three factors: i) the mean signal-to-noise ratio (SNR) of the measurement; ii) the measurement integration time; and iii) speckle-induced intensity noise. The predicted analytical relationship between measurement SNR and probability of detection was validated by numerical simulations and experimental demonstrations in both a controlled fiber channel and under fully-developed speckle conditions in an uncontrolled free-space channel.
ABSTRACT
We present a detailed analysis of techniques to mitigate the effects of phase noise and Doppler-induced frequency offsets in coherent random amplitude modulated continuous-wave (RAMCW) LiDAR. The analysis focuses specifically on a technique which uses coherent dual-quadrature detection to enable a sum of squares calculation to remove the input signal's dependence on carrier phase and frequency. This increases the correlation bandwidth of the matched-template filter to the bandwidth of the acquisition system, whilst also supporting the simultaneous measurement of relative radial velocity with unambiguous direction-of-travel. A combination of simulations and experiments demonstrate the sum of squares technique's ability to measure distance with consistently high SNR, more than 15 dB better than alternative techniques whilst operating in the presence of otherwise catastrophic phase noise and large frequency offsets. In principle, the technique is able to mitigate any sources of phase noise and frequency offsets common to the two orthogonal outputs of a coherent dual-quadrature receiver including laser frequency noise, speckle-induced phase noise, and Doppler frequency shifts due to accelerations.
