2 µm passively mode-locked thulium-doped fiber lasers with Ta2AlC-deposited tapered and side-polished fibers.

In this work, mode-locked thulium-doped fiber lasers operating in the 2 µm wavelength region were demonstrated using tantalum aluminum carbide (Ta2AlC)-based saturable absorbers (SAs) utilizing the evanescent wave interaction. The Ta2AlC MAX Phase was prepared by dissolving the Ta2AlC powder in isopropyl alcohol and then deposited onto three different evanescent field-based devices, which were the tapered fiber, side-polished fiber, and arc-shaped fiber. Flame-brushing and wheel-polishing techniques were used to fabricate the tapered and arc-shaped fibers, respectively, while the side-polished fiber was purchased commercially. All three SA devices generated stable mode-locked pulses at center wavelengths of 1937, 1931, and 1929 nm for the tapered, side-polished, and arc-shaped fibers. The frequency of the mode-locked pulses was 10.73 MHz for the tapered fiber, 9.58 MHz for the side-polished fiber, and 10.16 MHz for the arc-shaped fiber. The measured pulse widths were 1.678, 1.734, and 1.817 ps for each of the three SA devices. The long-term stability of the mode-locked lasers was tested for each configuration over a 2-h duration. The lasers also showed little to no fluctuations in the center wavelengths and the peak optical intensities, demonstrating a reliable, ultrafast laser system.

Passively mode locked thulium and thulium/holmium doped fiber lasers using MXene Nb2C coated microfiber.

As a result of the emergence of two-dimensional (2D) materials for various opto-electronics applications, a new class of materials named MXenes have been attracting interests due to their outstanding nonlinear properties. In this work, an MXene niobium carbide (Nb2C) was proposed and demonstrated as a saturable absorber to induce mode-locking in thulium- and thulium/holmium-doped fiber lasers. The Nb2C solution was first prepared using the liquid exfoliation technique, and then deposited onto a microfiber for integration into the laser cavity. Stable mode-locking operation was observed in both laser cavities, where the center wavelengths of the laser were recorded at 1944 nm for the TDFL and 1950 nm for the THDFL. The generated pulses in the TDFL and THDFL had repetition rates of 9.35 and 11.76 MHz respectively, while their corresponding pulse widths were 1.67 and 1.34 ps. Both of the lasers were highly stable, having SNR values of more than 52 dB and showed no major fluctuations when tested for their long-term stabilities. The results demonstrate an excellent performance of the Nb2C as a saturable absorber, offering opportunities to further explore MXenes for future photonics devices.

1.3 µm dissipative soliton resonance generation in Bismuth doped fiber laser.

In this work, a Figure-9 (F9) bismuth-doped fiber laser (BiDFL) operating in the dissipative soliton resonance (DSR) regime is presented. The 1338 nm laser used a BiDF as the active gain medium, while a nonlinear amplifying loop mirror (NALM) in an F9 configuration was employed to obtain high energy mode-locked pulses. The wave breaking-free rectangular pulse widened significantly in the time domain with the increase of the pump power while maintaining an almost constant peak power of 0.6 W. At the maximum pump power, the mode-locked laser delivered a rectangular-shaped pulse with a duration of 48 ns, repetition rate of 362 kHz and a radio-frequency signal-to-noise ratio of more than 60 dB. The maximum output power was recorded at around 11 mW with a corresponding pulse energy of 30 nJ. This is, to the best of the author's knowledge, the highest mode-locked pulse energy obtained at 1.3 µm as well as the demonstration of an NALM BiDFL in a F9 configuration.

Generation of Q-switched Pulses in Thulium-doped and Thulium/Holmium-co-doped Fiber Lasers using MAX phase (Ti3AlC2).

A MAX phase Ti3AlC2 thin film is demonstrated as a saturable absorber (SA) to induce Q-switching in the 2.0 µm region. The Ti3AlC2 thin film is sandwiched between two fiber ferrules and integrated into thulium doped fiber laser (TDFL) and thulium-holmium doped fiber laser (THDFL) cavities. Stable Q-switched pulses are observed at 1980.79 nm and 1959.3 nm in the TDFL and THDFL cavities respectively, with repetition rates of 32.57 kHz and 21.94 kHz and corresponding pulse widths of 2.72 µs and 3.9 µs for both cavities. The performance of the Ti3AlC2 based SA for Q-switching operation indicates the high potential of other MAX phase materials to serve as SAs in future photonics systems.

All-fiber multimode interferometer for the generation of a switchable multi-wavelength thulium-doped fiber laser.

A compact all-fiber multimode interferometer (MMI) designed to produce a switchable multi-wavelength thulium-doped fiber laser (TDFL) is proposed and demonstrated. The TDFL fiber ring cavity employs a 60-cm-long multimode fiber into the cavity to induce multimode interference and provide intensity-dependent loss in order to generate a multi-wavelength output. The suppression of mode competition and the overall stability of the TDFL are further improved by exploiting the filtering capability of a Sagnac loop. By increasing the pump power, a switchable wavelength output is allowed with a wavelength spacing of ∼1.8 nm. At 361 mW input pump power, nine laser lines are generated, with a maximum signal-to-noise ratio value of ∼36 dB and an output power of 3.3 mW. The multi-wavelength TDFL also exhibits great stability in one-hour operation with a wavelength drift of 0.2 nm. The proposed multi-wavelength TDFL has potential to be employed in future thulium-doped fiber amplifier-based telecommunication infrastructure and also may be applicable in areas such as sensing and spectroscopy, largely associated with its 2 µm wavelength output.