Modelling the catabolic environment of the moderately degenerated disc with a caprine ex vivo loaded disc culture system.

Low-back pain affects 80 % of the world population at some point in their lives and 40 % of the cases are attributed to intervertebral disc (IVD) degeneration. Over the years, many animal models have been developed for the evaluation of prevention and treatment strategies for IVD degeneration. Ex vivo organ culture systems have also been developed to better control mechanical loading and biochemical conditions, but a reproducible ex vivo model that mimics moderate human disc degeneration is lacking. The present study described an ex vivo caprine IVD degeneration model that simulated the changes seen in the nucleus pulposus during moderate human disc degeneration. Following pre-load under diurnal, simulated physiological loading (SPL) conditions, lumbar caprine IVDs were degenerated enzymatically by injecting collagenase and chondroitinase ABC (cABC). After digestion, IVDs were subjected to SPL for 7 d. No intervention and phosphate-buffered saline injection were used as controls. Disc deformation was continuously monitored to assess disc height recovery. Histology and immunohistochemistry were performed to determine the histological grade of degeneration, matrix expression, degrading enzyme and catabolic cytokine expression. Injection of collagenase and cABC irreversibly affected the disc mechanical properties. A decrease in extracellular matrix components was found, along with a consistent increase in degradative enzymes and catabolic proteins [interleukin (IL)-1ß, -8 and vascular endothelial growth factor (VEGF)]. The changes observed were commensurate with those seen in moderate human-IVD degeneration. This model should allow for controlled ex vivo testing of potential biological, cellular and biomaterial treatments of moderate human-IVD degeneration.

Investigation of infinite focus microscopy for the determination of the association of blood with fingermarks.

The determination of the type of deposition mechanism of blood within fingermarks at the scene of violent crimes is of great importance for the reconstruction of the bloodshed dynamics. However, to date, evaluation still relies on the subjective visual examination of experts. Practitioners encounter three types of scenarios in which blood may be found in fingermarks and they refer to the following three deposition mechanisms: (i) blood marks, originating from a bloodied fingertip; (ii) marks in blood, originating from a clean fingertip contacting a blood contaminated surface; (iii) coincidental deposition mechanisms, originating from a clean fingertip contacting a clean surface, leaving a latent fingermark, and subsequent contamination with blood. The authors hypothesised that, due to differences in distribution of blood in the furrows and on the ridges, the height of blood depositions on the ridges and furrows (and their relative proportions), will differ significantly across the three depositions mechanisms. A second hypothesis was made that the differences would be significant and consistent enough to exploit their measurement as a quantitative and objective way to differentiate the deposition mechanisms. In recent years, infinite focus microscopy (IFM) has been developed, allowing for the computational generation of a 3D image of the topology of a sample via acquisition of images on multiple focal planes. On these bases, it was finally hypothesised that the application of this technique would allow the distinction of deposition mechanisms (i) to (iii). A set of preliminary experiments were designed to test whether IFM was "fit for purpose" and, subsequently, to test if any of the three deposition mechanisms scenarios could be differentiated. Though IFM enabled the analysis of tape lifted samples with some success, for samples produced and analysed directly on the surface of deposition, the results show that the measurements from any scenario will be highly dependent on the original surface of deposition (both in terms of its nature and of the variable exposure to environment); as crime scenes exhibit a wide range of possible relevant surfaces of deposition, the technique showed to not have the desired wide appeal for inclusion into a standardised set of protocols within a routine crime scene workflow.

Early changes in the extracellular matrix of the degenerating intervertebral disc, assessed by Fourier transform infrared imaging.

OBJECTIVE: Mechanical overloading induces a degenerative cell response in the intervertebral disc. However, early changes in the extracellular matrix (ECM) are challenging to assess with conventional techniques. Fourier Transform Infrared (FTIR) imaging allows visualization and quantification of the ECM. We aim to identify markers for disc degeneration and apply these to investigate early degenerative changes due to overloading and katabolic cell activity. DESIGN: Three experiments were conducted; Exp 1.: In vivo, lumbar spines of seven goats were operated: one disc was injected with chondroitinase ABC [cABC (mild degeneration)] and compared to the adjacent disc (control) after 24 weeks. Exp 2a: Ex vivo, caprine discs received physiological loading (n = 10) or overloading (n = 10) in a bioreactor. Exp 2b: Cell activity was diminished prior to testing by freeze-thaw cycles, 18 discs were then tested as in Exp 2a. In all experiments, FTIR images (spectral region: 1000-1300 cm-1) of mid-sagittal slices were analyzed using multivariate curve resolution. RESULTS: In vivo, FTIR was more sensitive than biochemical and histological analysis in identifying reduced proteoglycan content (P = 0.046) and increased collagen content in degenerated discs (P < 0.01). Notably, FTIR analysis additionally showed disorganization of the ECM, indicated by increased collagen entropy (P = 0.011). Ex vivo, the proteoglycan/collagen ratio decreased due to overloading (P = 0.047) and collagen entropy increased (P = 0.047). Cell activity affected collagen content only (P = 0.044). CONCLUSION: FTIR imaging allows a more detailed investigation of early disc degeneration than traditional measures. Changes due to mild overloading could be assessed and quantified. Matrix remodeling is the first detectable step towards intervertebral disc degeneration.

Use of hydrogel scaffolds to develop an in vitro 3D culture model of human intestinal epithelium.

The human intestinal cell lines: Caco-2 and HT29-MTX cells have been used extensively in 2D and 3D cell cultures as simple models of the small intestinal epithelium in vitro. This study aimed to investigate the potential of three hydrogel scaffolds to support the 3D culture of Caco-2 and HT29-MTX cells and critically assess their use as scaffolds to stimulate villi formation to model a small intestinal epithelium in vitro. Here, alginate, l-pNIPAM, and l-pNIPAM-co-DMAc hydrogels were investigated. The cells were suspended within or layered on these hydrogels and maintained under static or dynamic culture conditions for up to 21days. Caco-2 cell viability was increased when layered on the synthetic hydrogel scaffolds, but reduced when suspended within the synthetic hydrogels. In contrast, HT29-MTX cells remained viable when suspended within or layered on all 3D cultures. Interestingly, cells cultured in and on the alginate hydrogel scaffolds formed multilayer spheroid structures, whilst the cells layered on synthetic hydrogels formed villus-like structures. Immunohistochemistry staining demonstrated positive expression of enterocyte differentiation markers and goblet cell marker. In conclusion, l-pNIPAM hydrogel scaffolds supported both cell lines and induced formation of villus-like structures when cells were layered on and cultured under dynamic conditions. The ability of the l-pNIPAM to recapitulate the 3D structure and differentiate main cell types of human intestinal villi may deliver a potential alternative in vitro model for studying intestinal disease and for drug testing. STATEMENT OF SIGNIFICANCE: Forty percent of hospital referrals are linked to disorders of the digestive tract. Current studies have utilised animal models or simple cultures of isolated cells which do not behave in the same manner as human intestine. Thus new models are required which more closely mimic the behaviour of intestinal cells. Here, we tested a number of scaffolds and conditions to develop a cell culture model which closely represents the 3D environment seen within the human small intestine. We successfully created structures seen within the intestine which have not previously been possible with other culture models. These models could be used to investigate tissue engineering, drug discovery, and used asan alternative to in vivo animal models in drug toxicity studies.

Thermally triggered hydrogel injection into bovine intervertebral disc tissue explants induces differentiation of mesenchymal stem cells and restores mechanical function.

We previously reported a synthetic Laponite® crosslinked pNIPAM-co-DMAc (L-pNIPAM-co-DMAc) hydrogel which promotes differentiation of mesenchymal stem cells (MSCs) to nucleus pulposus (NP) cells without additional growth factors. The clinical success of this hydrogel is dependent on: integration with surrounding tissue; the capacity to restore mechanical function; as well as supporting the viability and differentiation of delivered MSCs. Bovine NP tissue explants were injected with media (control), human MSCs (hMSCs) alone, acellular L-pNIPAM-co-DMAc hydrogel or hMSCs incorporated within the L-pNIPAM-co-DMAc hydrogel and maintained at 5% O2 for 6weeks. Viability of native NP cells and delivered MSCs was maintained. Furthermore hMSCs delivered via the L-pNIPAM-co-DMAc hydrogel differentiated and produced NP matrix components: aggrecan, collagen type II and chondroitin sulphate, with integration of the hydrogel with native NP tissue. In addition L-pNIPAM-co-DMAc hydrogel injected into collagenase digested bovine discs filled micro and macro fissures, were maintained within the disc during loading and restored IVD stiffness. The mechanical support of the L-pNIPAM-co-DMAc hydrogel, to restore disc height, could provide immediate symptomatic pain relief, whilst the delivery of MSCs over time regenerates the NP extracellular matrix; thus the L-pNIPAM-co-DMAc hydrogel could provide a combined cellular and mechanical repair approach. STATEMENT OF SIGNIFICANCE: Low back pain (LBP) is associated with degeneration of the intervertebral disc (IVD). We have previously described development of a jelly delivery system (hydrogel). This has the potential to deliver adult stem cells to the centre of the IVD, known as the nucleus pulposus (NP). Here, we have demonstrated that adult stem cells can be safely injected into the NP using small bore needles, reducing damage to the disc. Following injection the hydrogel integrates with surrounding NP tissue, promotes differentiation of stem cells towards disc cells and restores IVD mechanical function. The hydrogel could be used to restore mechanical function to the IVD and deliver cells to promote regeneration of the disc as a minimally invasive treatment for LBP.

Hydroxyapatite nanoparticle injectable hydrogel scaffold to support osteogenic differentiation of human mesenchymal stem cells.

Bone loss associated with degenerative disease and trauma is a clinical problem increasing with the aging population. Thus, effective bone augmentation strategies are required; however, many have the disadvantages that they require invasive surgery and often the addition of expensive growth factors to induce osteoblast differentiation. Here, we investigated a LaponiteÒ crosslinked, pNIPAM-DMAc copolymer (L-pNIPAM-co-DMAc) hydrogel with hydroxyapatite nanoparticles (HAPna), which can be maintained as a liquid ex vivo, injected via narrow-gauge needle into affected bone, followed by in situ gelation to deliver and induce osteogenic differentiation of human mesenchymal stem cells (hMSC). L-pNIPAM-co-DMAc hydrogels were synthesised and HAPna added post polymerisation. Commercial hMSCs from one donor (Lonza) were incorporated in liquid hydrogel, the mixture solidified and cultured for up to 6 weeks. Viability of hMSCs was maintained within hydrogel constructs containing 0.5 mg/mL HAPna. SEM analysis demonstrated matrix deposition in cellular hydrogels which were absent in acellular controls. A significant increase in storage modulus (G') was observed in cellular hydrogels with 0.5 mg/mL HAPna. Semi-quantitative immunohistochemistry and histological analysis demonstrated that bone differentiation markers and collagen deposition was induced within 48 h, with increased calcium deposition with time. The thermally triggered hydrogel system, described here, was sufficient without the need of additional growth factors or osteogenic media to induce osteogenic differentiation of commercial hMSCs. Preliminary data presented here will be expanded on multiple patient samples to ensure differentiation is seen in these samples. This system could potentially reduce treatment costs and simplify the treatment strategy for orthopaedic repair and regeneration.

Thermally triggered injectable hydrogel, which induces mesenchymal stem cell differentiation to nucleus pulposus cells: Potential for regeneration of the intervertebral disc.

There is an urgent need for new therapeutic options for low back pain, which target degeneration of the intervertebral disc (IVD). Here, we investigated a pNIPAM hydrogel system, which is liquid at 39°C ex vivo, where following injection into the IVD, body temperature triggers gelation. The combined effects of hypoxia (5% O2) and the structural environment of the hydrogel delivery system on the differentiation of human mesenchymal stem cells (hMSCs), towards an NP cell phenotype was investigated. hMSCs were incorporated into the liquid hydrogel, the mixture solidified and cultured for up to 6weeks under 21% O2 or 5% O2 where viability was maintained. Immunohistochemistry revealed significant increases in NP matrix components: aggrecan; collagen type II and chondroitin sulphate after culture for 1week in 5% O2, accompanied by increased matrix staining for proteoglycans and collagen, observed histologically. NP markers HIF1α, PAX1 and FOXF1 were also significantly increased where hMSC were incorporated into hydrogels with accelerated expression observed when cultured in 5% O2. hMSCs cultured under hypoxic conditions, which mimic the native disc microenvironment, accelerate differentiation of hMSCs within the hydrogel system, towards the NP phenotype without the need for chondrogenic inducing medium or additional growth factors, thus simplifying the treatment strategy for the repair of IVD degeneration.

Water diffusion and sorption-induced swelling as a function of temperature and ethylene content in ethylene-vinyl alcohol copolymers as determined by attenuated total reflection fourier transform infrared spectroscopy.

Attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy has been advantageously used to carry out a simultaneous study of the effect of temperature on sorption, diffusion, swelling rate, and swelling rate factor of ethylene-vinyl alcohol (EVOH) cast films with three different ethylene contents (29, 38, and 44 mol % of ethylene). While the sorption and swelling levels at equilibrium did not appear to be affected by temperature in the temperature range studied, the effect of increasing ethylene content was seen to largely decrease the sorption-induced swelling. It should be noted that all samples showed significant levels of swelling ( approximately 60% in the copolymer with lowest ethylene content), suggesting that films obtained by solution-casting generate polymer morphologies that are far more prone to uptake water than typical melt-extruded ones. It was also observed that increasing the ethylene content led to a reduction of the "effective" D value, while raising the temperature increased diffusion and swelling rate factor. The activation energies obtained for the diffusion of water were relatively low and similar to the typical energy barrier required to break hydrogen bonding interactions, suggesting that water molecules diffuse very easily across the film due to its high chemical affinity with the polymer matrix.