3D printed titanium micro-bore columns containing polymer monoliths for reversed-phase liquid chromatography.

The potential of 3D selective laser melting (SLM) technology to produce compact, temperature and pressure stable titanium alloy chromatographic columns is explored. A micro bore channel (0.9 mm I.D. × 600 mm long) was produced within a 5 × 30 × 30 mm titanium alloy (Ti-6Al-4V) cuboid, in form of a double handed spiral. A poly(butyl methacrylate-co-ethyleneglycoldimethacrylate) (BuMA-co-EDMA) monolithic stationary phase was thermally polymerised within the channel for application in reversed-phase high-performance liquid chromatography. The prepared monolithic column was applied to the liquid chromatographic separation of intact proteins and peptides. Peak capacities of 69-76 (for 6-8 proteins respectively) were observed during isothermal separation of proteins at 44 °C which were further increased to 73-77 using a thermal step gradient with programmed temperature from 60 °C to 35 °C using an in-house built direct-contact heater/cooler platform based upon matching sized Peltier thermoelectric modules. Rapid temperature gradients were possible due to direct-contact between the planar metal column and the Peltier module, and the high thermal conductivity of the titanium column as compared to a similar stainless steel printed column. The separation of peptides released from a digestion of E.coli was also achieved in less than 35 min with ca. 40 distinguishable peaks at 210 nm.

Simple, quantitative method for low molecular weight dissolved organic matter extracted from natural waters based upon high performance counter-current chromatography.

A simple, high-performance counter-current chromatography method with sequential UV absorbance (254 nm) and evaporative light scattering detection (ELSD) was developed for the quantification of pre-extracted low molecular weight dissolved organic matter (DOM) extracted from natural waters. The method requires solid-phase extraction (SPE) extraction of only small volumes of water samples, here using poly(styrenedivinylbenzene)-based extraction cartridges (Varian PPL). The extracted and concentrated DOM was quantified using reversed-phase high-performance counter-current chromatography (HPCCC), with a water/methanol (5:5) mobile phase and hexane/ethyl acetate (3:7) stationary phase. The critical chromatographic parameters were optimised, applying a revolution speed of 1900 rpm and a flow-rate of 1 mL min(-1). Under these conditions, 50 µL of extracted DOM solution could be injected and quantified using calibration against a reference natural dissolved material (Suwannee River), based upon UV absorbance at 254 nm and ELSD detection. Both detection methods provided excellent linearity (R(2) > 0.995) for DOM across the concentration ranges of interest, with limits of detection of 4 µg ml(-1) and 7 µg ml(-1) for ELSD and UV absorbance, respectively. The method was validated for peak area precision (<5%), and accuracy and recovery based upon spiking seawater samples prior to extraction, together with DOM solutions post-extraction (>95% recovery). The developed method was applied to the determination of the concentration of DOM in seawater, based upon initial sample volumes as small as 20 mL.

Chromatographic methods for the isolation, separation and characterisation of dissolved organic matter.

This review presents an overview of the separation techniques applied to the complex challenge of dissolved organic matter characterisation. The review discusses methods for isolation of dissolved organic matter from natural waters, and the range of separation techniques used to further fractionate this complex material. The review covers both liquid and gas chromatographic techniques, in their various modes, and electrophoretic based approaches. For each, the challenges that the separation and fractionation of such an immensely complex sample poses is critically reviewed.

Normal-phase high-performance counter-current chromatography for the fractionation of dissolved organic matter from a freshwater source.

Normal-phase high-performance counter-current chromatography (HPCCC) is used to obtain a preliminary fractionation of components in dissolved organic matter (DOM) from a freshwater source. The HPCCC solvent system involved a normal-phase approach with water/methanol (1:1) as the lower stationary phase and hexane/ethyl acetate (1:1) as the upper mobile phase. The critical experiment parameters were optimised: revolution speed 1800 rpm and flow rate 0.15 mL/min. Under these conditions 50 µL of a 0.50 mg/mL DOM solution was loaded. The detection wavelength was monitored at 330 nm in order to isolate the main portion of DOM, which includes substances such as carboxyl-rich alicyclic molecules. By optimising this system it was possible to isolate materials that, according to GC-MS, can be related to molecules with an analogous structural background. Where fraction analysis was not suitable for GC-MS, RP-HPLC with UV absorbance detection was used, showing unique chromatograms for each fraction at both 210 and 330 nm.

Rapid and sensitive analysis of vincristine in human plasma using on-line extraction combined with liquid chromatography/tandem mass spectrometry.

A simple and rapid method has been developed and validated for the quantitation of vincristine in human plasma by liquid chromatography/tandem mass spectrometry (LC/MS/MS) with atmospheric pressure chemical ionization using on-line solid-phase extraction. The method uses vinblastine as internal standard and the sample preparation is limited just to a plasma protein precipitation step. Further sample clean-up is carried out on-line through a perfusion column preceding an analytical phenyl LC column, the latter directly connected to the mass spectrometer. Quantitation is performed in multiple reaction monitoring mode using the transitions of m/z 825.3 --> 765.3 and 811.3 --> 751.3 for vincristine and vinblastine respectively. The assay was linear (r2 > or =0.99) in a concentration range from 0.1 to 500 ng/mL. Carry-over, measured on the experimental set-up, was less than 0.04%. Recovery for vincristine and the internal standard was within 90-95%. The intra-day and inter-day assay precision ranged from 1.2% to 6.8% RSD while mean percentage deviation from nominal value ranged from 0.01% to 6.1%. The proposed assay was found suitable for pharmacokinetics investigations and clinical therapeutic drug monitoring especially in pediatric cancer patients.