Conditionally Increased Acoustic Pressures in Nonfetal Diagnostic Ultrasound Examinations Without Contrast Agents: A Preliminary Assessment.

The mechanical index (MI) has been used by the US Food and Drug Administration (FDA) since 1992 for regulatory decisions regarding the acoustic output of diagnostic ultrasound equipment. Its formula is based on predictions of acoustic cavitation under specific conditions. Since its implementation over 2 decades ago, new imaging modes have been developed that employ unique beam sequences exploiting higher-order acoustic phenomena, and, concurrently, studies of the bioeffects of ultrasound under a range of imaging scenarios have been conducted. In 2012, the American Institute of Ultrasound in Medicine Technical Standards Committee convened a working group of its Output Standards Subcommittee to examine and report on the potential risks and benefits of the use of conditionally increased acoustic pressures (CIP) under specific diagnostic imaging scenarios. The term "conditionally" is included to indicate that CIP would be considered on a per-patient basis for the duration required to obtain the necessary diagnostic information. This document is a result of that effort. In summary, a fundamental assumption in the MI calculation is the presence of a preexisting gas body. For tissues not known to contain preexisting gas bodies, based on theoretical predications and experimentally reported cavitation thresholds, we find this assumption to be invalid. We thus conclude that exceeding the recommended maximum MI level given in the FDA guidance could be warranted without concern for increased risk of cavitation in these tissues. However, there is limited literature assessing the potential clinical benefit of exceeding the MI guidelines in these tissues. The report proposes a 3-tiered approach for CIP that follows the model for employing elevated output in magnetic resonance imaging and concludes with summary recommendations to facilitate Institutional Review Board (IRB)-monitored clinical studies investigating CIP in specific tissues.

The thermal index: its strengths, weaknesses, and proposed improvements.

The thermal index (TI) has been used as a relative indicator of thermal risk during diagnostic ultrasound examinations for many years. It is useful in providing feedback to the clinician or sonographer, allowing assessment of relative, potential risks to the patient of an adverse effect due to a thermal mechanism. Recently, several shortcomings of the TI formulations in quantifying the risk to the patient have been identified by members of the basic scientific community, and possible improvements to address these shortcomings have been proposed. For this reason, the Output Standards Subcommittee of the American Institute of Ultrasound in Medicine convened a subcommittee to review the strengths of the TI formulations as well as their weaknesses and proposed improvements. This article summarizes the findings of this subcommittee. After a careful review of the literature and an assessment of the cost of updating the TI formulations while maximizing the quality of patient care, the Output Standards Subcommittee makes the following recommendations: (1) some inconsistencies in the current TI formulations should be resolved, and the break point distance should be redefined to take focusing into consideration; (2) an entirely new indicator of thermal risk that incorporates the time dependence not be implemented at this time but be included in continuing efforts toward standards or consensus documents; (3) the exponential dependence of risk on temperature not be incorporated into a new definition of the TI formulations at this time but be included in continuing efforts toward standards or consensus documents; (4) the TI formulations not be altered to include nonlinear propagation at this time but be included in continuing efforts toward standards or consensus documents; and (5) a new indicator for risk from thermal mechanisms should be developed, distinct from the traditional TI formulations, for new imaging modalities such as acoustic radiation force impulse imaging, which have more complicated pulsing sequences than traditional imaging.

Evaluation of tissue mimicking quality of tofu for biomedical ultrasound.

The tissue mimicking quality of tofu has been evaluated in terms of acoustic properties and acousto/thermal conversion as functions of frequency and diffraction corrected intensity over the 2 MHz to 18 MHz range using three unfocussed transducers with center frequencies of 5 MHz, 10 MHz and 15 MHz. The density and acoustic velocity were close to the American Institute of Ultrasound in Medicine (AIUM) recommended values for the soft tissue, however, the attenuation increases nonlinearly with frequency as alpha = 0.56 x f(1.3). As a result, the temperature rise in tofu due to ultrasound absorption is expressed by the product of the acousto/thermal conversion factor and the attenuation/diffraction corrected acoustic intensity. The decrease of temperature rise with depth measured by embedded thermocouples agrees with the theoretical exponential decrease of the attenuation/diffraction corrected acoustic intensity. The heat capacity per unit mass of tofu is 0.76 cal/g degrees C (equivalent to 3.18 J/g degrees C) of which about 76% is water. The nonlinear frequency dependence of attenuation in tofu as f(1.3) correctly describes the frequency dependence of temperature rise. The present results suggest that tofu may only be used in a limited low MHz range in view of the estimation of temperature rise and penetration depth due to nonlinear frequency dependence of attenuation.