ABSTRACT
Li-ion batteries are expected to become the mainstream devices for green energy storage or power supply in the future due to their advantages of high energy and power density and long cycle life. Monitoring the temperature and strain change characteristics of Li-ion batteries during operation is conducive to judging their safety performance. The hinged differential lever sensitization structure was used for strain sensitization in the design of an FBG sensor, which also allowed the simultaneous measurement of strain and temperature. The temperature and strain variation characteristics on the surface of a Li-ion soft-packed battery were measured using the des.igned sensor. This report found that the charging and discharging processes of Li-ion batteries are both exothermic processes, and exothermic heat release is greater when discharging than when charging. The strain on the surface of Li-ion batteries depends on electrochemical changes and thermal expansion effects during the charge and discharge processes. The charging process showed an increasing strain, and the discharging process showed a decreasing strain. Thermal expansion was found to be the primary cause of strain at high rates.
ABSTRACT
The expansion of urban construction areas can reduce the infiltration rate of rainwater in permeable land, and a large amount of runoff rainwater cannot penetrate the soil. In extreme rainstorm weather, it is easy to cause serious urban waterlogging problems. To improve the infiltration and decontamination ability of green space soil, two types of inorganic ameliorants (i.e., sand and grain shell) and structural ameliorants (i.e., desulfurization gypsum and polyacrylamide) were utilized as amendments in the soil. The influence of the selected ameliorants on the infiltration and decontamination ability was analyzed through a soil infiltration test, soil pore distribution determination and a soil decontamination test. Three parameters including the soil infiltration rate, pore distribution characteristics and pollutant removal rate were proposed. The results showed that sand, grain shells and desulfurization gypsum (FGD gypsum) all enhanced the infiltration capacity of soil, while PAM decreased the infiltration capacity. Meanwhile, mixed sand and grain shell with the FGD gypsum and polyacrylamide can effectively improve the decontamination capacity of the soil. Comprehensive analysis showed that the better improvement combination is 10% sand + 20% grain hull + 0.5 g/kg FGD gypsum + 0.1 g/kg PAM.
ABSTRACT
Conductive hydrogels featuring a modulus similar to the skin have flourished in health monitoring and human-machine interface systems. However, developing conductive hydrogels with self-healing and tunable force-electrical performance remains a problem. Herein, a hydrogen bonding cross-linking strategy was utilized by incorporating silk sericin-modified carbon nanotubes (SS@CNTs) into sodium alginate (SA) and polyvinyl alcohol (PVA). Hydrogels synthesized with desirable tensile strength and self-healing ability (67.2 % self-healing efficiency in fracture strength) assembled into strain sensors with a low detection limit of 0.5 % and a gauge factor (GF) of 4.75 (0-17 %). Additionally, as-prepared hydrogels exhibit high sensitivity to tiny pressure changes, allowing recognition of complex handwriting. Notably, resulting hydrogels possess self-powered property, generating up to 215 V and illuminating 100 commercial green LEDs. This work stems from the pressing need for multifunctional hydrogels with prospective applications in human motion sensing and energy harvesting.
